LG Flatron L222ws Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
L222WS
User’s Guide
 

A1
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which...

A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor with its front facing downward on a soft cloth....

A4
Connecting the Display
Disassembling the stand
Type. A
1.Put a cushion or soft cloth on aflat
surface.
3.Pushing Latch inside, Take the stand base from stand body.
5.Pack up the product as shown in the picture.
4.Separate the stand using a screwdriver as shown in the picture.
Note: Please keep the 4 screws in an accessible place for future use.
2.Place the monitor face Down on
the cushion or soft cloth.
 

A5
Connecting the Display
Disassembling the stand
Type. B
1.Put a cushion or soft cloth on aflat
surface.
3.Change your hold on the product as it follows and turn the Stand Base in the arrow direction.
5.Pushing Latch inside, Take the stand
base from stand body.6.Pack up the product as shown in the
picture.
4.Pull out the Stand to remove.
2.Place the monitor face Down on
the cushion or soft cloth.
 

A6
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
Swivel : 355˚   
 

A7
Using the Computer
1.Make sure to turn off the computer and product. Connect the cable as below sketch map
form to .1
2.Press        button on the front switch panel to turn the power on.
When monitor power is turned on, the Self Image Setting
Functionis executed automatically.
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for...

A8
Control Panel Functions
Control Function
AUTO Button
MENU ButtonUse this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message "OSD LOCKED"should appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
"OSD UNLOCKED"should appear.
Front Panel...

A9
Control Panel Functions
Use this button to enter a selection in the On Screen 
Display.SET Button
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Control Function
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
LightView hot key
This feature lets you easily select the best...