LG Flatron L2000cp Users Guide

							A10
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
-+
 
						

							A11
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB
standard color specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
COLOR
POSITION
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
To adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
SETUP
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu-+
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
"LANGUAGE." 
TRACKING
SETUP
MENU
-+
SET
SETUP
MENU-+
SETUse this function to set the power indicator
on the front side of the monitor to ONor
OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
Press the       button to reset immediately.+
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the SET Button
MOVIE
TEXT
NORMAL
BRIGHTNESS
ACE
1
2RCM
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
A A AThe OSD screen will appear when you touch the                      (-) button on the right
side of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the SET button
and save the YESvalue using the buttons.SAVE
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different environment setting.
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance0
1
2
3
MENU: Exit
,     : Move
SET    : Select-+
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
-+
 
						

							A14
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an "OUT
OF RANGE" message
on the screen?
Do you see a "CHECK
SIGNAL CABLE"
message on the     
screen?
Do you see a OSD LOCKED message on the screen?
Check and see if the power cord is connected
properly to the power outlet.
Press the Power button.
Adjust the brightness and the contrast.
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
Try to turn on the PC.
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
You can secure the current control settings,
so that they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENUbutton  for
several seconds: the message 
“OSD UNLOCKED”will appear.Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A15
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The screen color is
mono or abnormal.
The screen blinks.
Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASEicon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true
color) at Control Panel - Settings.
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							A16
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make sure to check if the video card supports
Plug&Play function.
 
						

							A17
Specific\btion\f      \≤                  \≤                  \≤                  \≤      
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating 
Visible diagonal size: 51.0cm 
0.255mm pixel pitch 
Horizontal Freq.Analog : 28 - 83kHz (Automatic) 
Digital : 28 - 83kHz (Automatic)
Vertical Freq. 56 - 85Hz (Automatic)
Input Form Separate Sync, Positive / Negative
Composite Sync, Positive / Negative
SOG (Sync On Green) , Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7Vp-p / 75ohm) , Digital
Max
D-Sub : Analog -  VESA 1600 x 1200@60Hz
DVI : Digital - VESA 1600 x 1200@60Hz
Recommend VESA 1600 x 1200@60Hz
DDC 2B
On Mode:     58W
Sleep Mode≤ 1W
Off Mode ≤1W
Width 44.60 cm / 17.56 inches
Height 44.78 cm / 17.62 inches (Min)
52.78 cm / 20.76 inches (Max)
Depth                         24.26 cm /   9.55 inches
Net 7.6 kg 
Tilt range -5˚~25˚
Swivel range  350˚
Height range             80mm / 3.15 inches
Rotate  90˚clockwise (Landscape -> Portrait)
AC 100-240V~ 50/60Hz 1.2A 
Operating Conditions 
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached(     ), Detached ( O ) 
Wall-outlet type or PC-outlet type
Displa\b 
S\bnc \fnput 
Video \fnput 
Resolution 
Plug&Pla\b 
Power 
Consumption 
Dimensions 
&Weight
(with tilt/ swivel\u         
stand) 
Tilt/Swivel Range 
Power \fnput
Environmental 
Conditions 
Tilt/Swivel Stand 
Power cord
NOTE Information in this document is subject to change without notice.
 
						

							A18
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
*18
**19 640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1600 x 1024
1600 x 1200
1600 x 120031.47
31.47
37.50
43.27
31.47
37.88
46.88
53.67
49.72
48.36
60.02
68.68
68.68
61.80
63.98
79.98
62.11
75.00
73.5370
60
75
85
70
60
75
85
75
60
75
85
75
65.96
60.02
75.02
60
60
60
Indicator
On Mode
Sleep Mode
Off ModeBlue
Amber
Off
LED Color MODE
*Recommend Mode
**Digital Mode 
 
						

							A19
How to Install the VESA Standard wall mounting
VESA wall mounting 
Connected to another object (stand type and wall-
mounted type. This monitor accepts a VESA-
compliant mounting interface pad.-  optional)
For further information, refer to the VESA Wall
Mounting Instruction Guide.
Kensington Security Slot - optional
Connected to a locking 
cable that can be purchased
separately at most 
computer stores
This monitor meets VESA-compliant mounting interface pad 
specifications.