LG Flatron L2000cn Users Guide

A10
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
:...

A11
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB
standard color specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish...

A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
To adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function...

A13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the AUTO/SET Button
MOVIE
TEXT
NORMAL
BRIGHTNESS
ACE
1
2RCM
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the
AUTO/SET button to use the adjusted screen.
FLATRON F-ENGINEScreen when...

A14
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
¦n ¦n
Is the power cord of the
display connected?
¦n ¦n
Is the power indicator
light on?
¦n ¦n
Is the power on and the
power indicator blue or
green?
¦n ¦n
Is the power indicator
amber?
¦n ¦n
Do you see an OUT
OF RANGE message
on the screen?
¦n ¦n
Do you see a CHECK
SIGNAL CABLE
message on the     
screen?
Do you see a OSD LOCKED message on the screen?
¦UCheck and see if the power cord is connected...

A15
Troubleshooting
Display image is incorrect
¦n ¦n
Display Position is
incorrect.
¦n ¦n
On the screen
background, vertical
bars or stripes are
visible.
¦n ¦n
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
¦n ¦n
The screen color is
mono or abnormal.
¦n ¦n
The screen blinks.¦UPress the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon...

A16
Troubleshooting
Have you installed the display driver?
¦n ¦n
Have you installed the
display driver?
¦n ¦n
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?¦UBe sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
¦UMake sure to check if the video card supports
Plug&Play function.
Image not stretched vertically at 1280x1024@60 and 
1280x1024@75...

A17
Specifications                                                     L2000C/L2000CN
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.255mm pixel pitch
Horizontal Freq.Analog : 28 - 83kHz (Automatic)
Digital : 28 - 83kHz (Automatic)
Vertical Freq.56 - 75Hz (Automatic)
Input FormSeparate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input15 pin D-Sub Connector
DVI - D connector (Digital)
Input FormRGB Analog (0.7Vp-p/75ohm), Digital
Max
D-Sub :...

A18
Specifications                                                                    L2000CE
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.291mm pixel pitch
Horizontal Freq.Analog : 28 - 83kHz (Automatic)
Digital : 28 - 83kHz (Automatic)
Vertical Freq.56 - 75Hz (Automatic)
Input FormSeparate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input15 pin D-Sub Connector
DVI - D connector (Digital)
Input FormRGB Analog (0.7Vp-p/75ohm), Digital...

A19
Specifications                                                                    
Attached(     ), Detached ( O )
Wall-outlet type or PC-outlet typeStand Base
Power cord
NOTE
Information in this document is subject to change without notice.