LG Flatron L2000c Users Guide

							A10
On Screen Display(OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
-+
 
						

							A11
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.PICTURE
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB
standard color specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
COLOR
POSITION
 
						

							A12
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
To adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu-+
SETUP
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu-+
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
LANGUAGE. 
TRACKING
SETUP
MENU
-+
SET
SETUP
MENU-+
SETUse this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
Press the       button to reset immediately.+
 
						

							A13
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the AUTO/SET Button
MOVIE
TEXT
NORMAL
BRIGHTNESS
ACE
1
2RCM
SAVE
USER
MENU SET
USER
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the
AUTO/SET button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
A A AThe OSD screen will appear when you touch the                      (-) button on the right
of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the SET button
and save the YESvalue using the buttons.SAVE
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different environment setting.
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance0
1
2
3
 
						

							A14
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
¦n ¦n
Is the power cord of the
display connected?
¦n ¦n
Is the power indicator
light on?
¦n ¦n
Is the power on and the
power indicator blue or
green?
¦n ¦n
Is the power indicator
amber?
¦n ¦n
Do you see an OUT
OF RANGE message
on the screen?
¦n ¦n
Do you see a CHECK
SIGNAL CABLE
message on the     
screen?
Do you see a OSD LOCKED message on the screen?
¦UCheck and see if the power cord is connected
properly to the power outlet.
¦UPress the Power button.
¦UAdjust the brightness and the contrast.
¦UIf the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
¦UTry to turn on the PC.
¦UThis message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
¦UThis message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
¦U
You can secure the current control settings,
so that they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENUbutton  for
several seconds: the message 
“OSD UNLOCKED”will appear.¦n
¦n
Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							A15
Troubleshooting
Display image is incorrect
¦n ¦n
Display Position is
incorrect.
¦n ¦n
On the screen
background, vertical
bars or stripes are
visible.
¦n ¦n
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
¦n ¦n
The screen color is
mono or abnormal.
¦n ¦n
The screen blinks.¦UPress the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
¦UCheck Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
¦UPress the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
¦UPress the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASEicon in the on
screen display.
¦UCheck Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
¦UCheck if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
¦UMake sure the video card is properly inserted in
the slot.
¦USet the color setting higher than 24 bits (true
color) at Control Panel - Settings.
¦UCheck if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							A16
Troubleshooting
Have you installed the display driver?
¦n ¦n
Have you installed the
display driver?
¦n ¦n
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?¦UBe sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
¦UMake sure to check if the video card supports
Plug&Play function.
Image not stretched vertically at 1280x1024@60 and 
1280x1024@75 resolutions Image 
¦n ¦n
Image has black
horizontal area or image
missing at the top edge
and bottom edge of the
screen.¦UThis is normal state of the image. It is being
implemented to avoid character blurriness
caused by scaling 1280x1024 to 1400x1050
resolution. 
L2000CE Monitor 
 
						

							A17
Specifications                                                     L2000C/L2000CN
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.255mm pixel pitch
Horizontal Freq.Analog : 28 - 83kHz (Automatic)
Digital : 28 - 83kHz (Automatic)
Vertical Freq.56 - 75Hz (Automatic)
Input FormSeparate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input15 pin D-Sub Connector
DVI - D connector (Digital)
Input FormRGB Analog (0.7Vp-p/75ohm), Digital
Max
D-Sub : Analog -  VESA 1600 x 1200@60Hz
DVI : Digital - VESA 1600 x 1200@60Hz
RecommendVESA 1600 x 1200@60Hz
DDC 2B
On Mode:  58W
Sleep Mode≤1W
Off Mode≤1W
With Stand Without Stand
Width 44.39 cm / 17.47 inches 44.39 cm / 17.47 inches
Height 43.89 cm / 17.28 inches(Min) 34.51 cm / 13.58 inches
51.89 cm / 20.43 inches(Max)
Depth 24.26 cm /   9.55 inches 6.86 cm /   2.70 inches
Net7.7 kg 
Tilt range-5˚~25˚
Swivel range 350˚
Height range            80mm / 3.15 inches
Rotate 90˚clockwise
AC 100-240V~ 50/60Hz 1.2A
Operating Conditions
Temperature10˚C to 35 ˚C
Humidity10 % to 80 % non-Condensing
Storage Conditions
Temperature-20˚C to 60 ˚C
Humidity5 % to 90 % non-Condensing
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt/Swivel Range
Power Input
Environmental
Conditions
 
						

							A18
Specifications                                                                    L2000CE
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.291mm pixel pitch
Horizontal Freq.Analog : 28 - 83kHz (Automatic)
Digital : 28 - 83kHz (Automatic)
Vertical Freq.56 - 75Hz (Automatic)
Input FormSeparate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input15 pin D-Sub Connector
DVI - D connector (Digital)
Input FormRGB Analog (0.7Vp-p/75ohm), Digital
Max
D-Sub : Analog -  VESA 1400 x 1050@60Hz
DVI : Digital - VESA 1400 x 1050@60Hz
RecommendVESA 1400 x 1050@60Hz
DDC 2B
On Mode:  58W
Sleep Mode≤1W
Off Mode≤1W
With Stand Without Stand
Width 44.39 cm / 17.47 inches 44.39 cm / 17.47 inches
Height 43.89 cm / 17.28 inches(Min) 34.51 cm / 13.58 inches
51.89 cm / 20.43 inches(Max)
Depth 24.26 cm /   9.55 inches 6.86 cm /   2.70 inches
Net7.5 kg 
Tilt range-5˚~25˚
Swivel range 350˚
Height range            80mm / 3.15 inches
Rotate 90˚clockwise
AC 100-240V~ 50/60Hz 1.2A
Operating Conditions
Temperature10˚C to 35 ˚C
Humidity10 % to 80 % non-Condensing
Storage Conditions
Temperature-20˚C to 60 ˚C
Humidity5 % to 90 % non-Condensing
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt/Swivel Range
Power Input
Environmental
Conditions
 
						

							A19
Specifications                                                                    
Attached(     ), Detached ( O )
Wall-outlet type or PC-outlet typeStand Base
Power cord
NOTE
Information in this document is subject to change without notice.