LG Flatron L1960tr Users Guide

							Make sure to read the Important Precautionsbefore using the monitor. 
Keep the Users Guide(CD) in an accessible place for furture reference.
See the label attached on the monitor and give the information to your
dealer when you ask for service.
L1760TQ
L1960TQ
L1760TG
L1960TG
L1760TR
L1960TR
L1960TC
User’s Guide
 
						

							A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. 
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
 
						

							Connecting the Display
A3
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the monitor upside down holding only the stand base. The monitor may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Attaching/Separating the stand base 
1. Place the monitor with its front facing downward on a soft cloth.
2.Make sure the stand base directs to the correct direction(Front, Rear) and turn the
locking device at the bottom to OPEN to assemble the unit. After assembling the unit, turn
the locking device to LOCK  before use.
Turn the locking device to OPEN to separate the stand base.  
3.Once assembled take the monitor up carefully and face the front side
4. After connecting the cable, adjust the angle of the panel for easy use.
(To connect the cable, see page A5 for reference.)
Tilt Range : -5˚~20˚   
Warning: Do not put your hand (finger)
between head section and stand section when
adjusting angle of screen. 
Your hand (finger) may get caught or wounded.
Ergonomic
It is recommended that in order to maintain
an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor
should not exceed 5 degrees.
Stand Body
Stand Base
LOCK
OPEN
-5¡£
20¡£Head section
Stand section
 
						

							A4
Connecting the Display
To attach or separate the back cap
1. To attach the back cap, fix into the 3 holes first then slide it up to fit to the upper 
groove.
2. To separate the back cap, hold the bottom part and pull it out.
Kensington Security SlotConnected to a locking 
cable that can be purchased
separately at most computer stores
Back Cap
NOTE
- Cover the back cap after connecting the cables before use.
(To connect the cable, see page A5 for reference.)
 
						

							DVI-D DC-IN D-SUB
A5
Connecting the Display
Connecting with the PC
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
2.Connect the signal cable      . When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cable      with the AC-DC adapter (AC-DC power supply)     , and
then plug the cable in the outlet.
Wall-outlet type
DVI-D(This feature is not available in all countries.)
Mac adapterFor Apple Macintosh use, a  separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin  2 row connector.
4.Touch the power button       in front to turn on the monitor.
The Self Image Setting Functionwill automatically run 
when the monitor is on. (Only Analog Mode)
NOTE  This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
1
32
MAC
[ Arranging the cables]
[ Connecting the cables]
1
2
PC
PC
DVI-D DC-IN D-SUB
3
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. 
‘SET/AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the SET/AUTO function button to improve
resolution. 
 
						

							A6
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
+   - ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A13.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.+ Button
(SOURCE Hot key)
Front Panel ControlsSide 
SOURCE
SOURCE
ME
NU ME
NUSET/AUTO SET/AUTO
Engine
Engine
- Button
(                   )
 
						

							A7
Control Panel Functions
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Touching on the    button for several seconds will
power up the unit and touching on it again for
several seconds will power off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.SET/AUTO
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the SET/AUTObutton before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1280 x 1024
Control Function
 
						

							A8
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the  -  or  +Buttons. When the icon you want
becomes highlighted, press the SET/AUTO Button.
Use the   -  / +   Buttons to adjust the image to the desired level. Use the
SET/AUTO Button to select other sub-menu items.
Push the MENU Buttononce to return to the main menu to select another
function. Push the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
SET/AUTO
MENU MENU-+-+
 
						

							A9
NOTE
The order of icons may differ depending on the model (A9~A13).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a users operating
environmentTo improve the clarity and
stability, sharpness of the
screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
D : Digital Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL