LG Flatron L1953s Users Guide

							A20
Specifications                                                                    19 inch
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, 
SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1280 x 1024 @75 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B
0n Mode: 33 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 40.20 cm / 15.83 inches 40.20 cm / 15.83 inches
Height 40.75 cm / 16.04 inches 33.30 cm / 13.11 inches
Depth 18.00 cm /   7.08 inches 5.80 cm /   2.28 inches
Net 4.2 kg (9.26 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached(    ), Detached ( O )
Wall-outlet type or PC-outlet type
ZownloadedHfromH8anual8onitorUcomH8anuals 
						

							A21
Specifications
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12
13640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 102431.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.97670
70
60
75
60
75
75
60
75
75
65
60
75 VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
Indicator
On Mode
Sleep Mode
Off ModeBlue
Amber
Off
LED Color
MODE
Preset Modes (Resolution)
* Recommend Mode
ZownloadedHfromH8anual8onitorUcomH8anuals 
						

							A22
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Put a cushion or soft cloth on a flat surface.2. Place  the  monitor  face  down  on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
ZownloadedHfromH8anual8onitorUcomH8anuals 
						

							A23
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stnad-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
Kensington Security Slot
Connected to a locking 
cable that can be purchased
separately at most 
computer stores
6.Installing the wall mount plate
ZownloadedHfromH8anual8onitorUcomH8anuals 
						

							Digitally yours