LG Flatron L1953hr Users Guide
Have a look at the manual LG Flatron L1953hr Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A20 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks.• Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTO/SETbutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. • Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. XownloadedsfromsManualMonitorDcomsManuals
A21 Troubleshooting Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. • Make sure to check if the video card supports Plug&Play function. *ownloadedMfromM•anual•onitorvcomM•anuals
A22A22 Specifications L1753H / L1753HR Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 30 W (Typ.) Sleep Mode ≤ 1 W Off Mode ≤ 1 W With Stand Without Stand Width 36.45 cm / 14.35 inches36.45 cm / 14.35 inches Height 35.18 cm / 13.85 inches (Min)30.53 cm / 12.02 inches 45.18 cm / 17.79 inches (Max) Depth 20.74 cm /8.17 inches 5.8 cm / 2.28 inches Net 3.68(+0.085) kg (8.17 lbs) Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type *ownloadedMfromM•anual•onitorvcomM•anuals
A23A23 Specifications L1753HM Display Sync Input Video Input Resolution Plug&Play Power Consumption (Without Speaker) Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 30 W (Typ.) Sleep Mode ≤ 1 W Off Mode ≤ 1 W With Stand Without Stand Width 36.44 cm / 14.34 inches 36.44 cm / 14.34 inches Height 39.09 cm / 15.39 inches (Min)34.00 cm / 13.39 inches 45.09 cm / 17.75 inches (Max) Depth 20.74 cm /8.17 inches 5.80 cm / 2.28 inches Net 3.88(+0.085) kg (8.62 lbs) Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type Audio RMS Audio Output1W+1W(R+L) Input Sensitivity0.7Vrms Speaker Impedance16Ω *ownloadedMfromM•anual•onitorvcomM•anuals
A24A24 Specifications L1953H / L1953HR NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 33 W (Typ.) Sleep Mode ≤ 1 W Off Mode ≤ 1 W With Stand Without Stand Width 40.20 cm / 15.83 inches 40.20 cm / 15.83 inches Height 36.47 cm / 14.36 inches(Min) 33.30 cm / 13.11 inches 46.47 cm / 18.30 inches(Max) Depth 20.74 cm / 8.17 inches 5.80 cm / 2.28 inches Net 4.51(+0.085) kg (10.02 lbs) Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type *ownloadedMfromM•anual•onitorvcomM•anuals
A25A25 Specifications L1953HM Display Sync Input Video Input Resolution Plug&Play Power Consumption (Without Speaker) Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 33 W (Typ.) Sleep Mode ≤ 1 W Off Mode ≤ 1 W With Stand Without Stand Width 40.20 cm / 15.83 inches 40.20 cm / 15.83 inches Height 40.60 cm / 15.98 inches(Min) 36.75 cm / 14.47 inches 46.60 cm / 18.35 inches(Max) Depth 20.74 cm / 8.17 inches 5.80 cm / 2.28 inches Net 4.70(+0.085) kg (10.36 lbs) Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type Audio RMS Audio Output1W+1W(R+L) Input Sensitivity0.7Vrms Speaker Impedance16Ω *ownloadedMfromM•anual•onitorvcomM•anuals
A26 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 **13640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 102431.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.97670 70 60 75 60 75 75 60 75 75 65 60 75 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA Indicator On Mode Sleep Mode Off ModeBlue Amber Off LED Color MODE Preset Modes (Resolution) * Recommend Mode ** Only Analog Mode *ownloadedMfromM•anual•onitorvcomM•anuals
A27 Specifications Signal Connector Pin Assignment 18 9 1724 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. D. S. Data3- T. M. D. S. Data3+ +5V Power Ground (return for +5V, H. Sync. and V. Sync.) Pin Signal(DVI-D) 16 17 18 19 20 21 22 23 24Hot Plug Detect T. M. D. S. Data0- T. M. D. S. Data0+ T. M. D. S. Data0/5 Shield T. M. D. S. Data5- T. M. D. S. Data5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. Clock- T. M. D. S. (Transition Minimized Differential Signaling) DVI-D Connector
A28A28 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Separate the stand after firstly separating 6 screws by using a driver as figure. Wall mount plate(Separate purchase) This is stand-type or will mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. 3.Install the Wall mount plate. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores REARREAR XownloadedsfromsManualMonitorDcomsManuals