LG Flatron L194wt Users Guide

							A20
Specifications                                            L194WT/L194WTQ/L194WTX
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base 
Signal cable
Power cord 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
19 inches viewable
0.2835 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Digital
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1440 x 900 @75 Hz Digital : VESA 1440 x 900 @60 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC 2B
0n Mode : 34 W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
With Stand Without Stand
Width 43.48 cm / 17.11 inches 43.48 cm / 17.11 inches
Height 36.99 cm / 14.56 inches 28.73 cm / 11.31 inches
Depth 22.60 cm /   8.89 inches 5.87 cm /   2.31 inches
Net 3.6 kg (7.94 lbs)
Tilt -5 ˚~20 ˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Attached (    ), Detached ( O )
Attached (    ), Detached ( O )
Wall-outlet type or PC-outlet type
 
						

							A21
Specifications                                                          \
         L194WTM
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
(without speaker)
Dimensions&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base 
Signal cable
Power cord 
19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
19 inches viewable
0.2835  mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green),Digital
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1440 x 900 @75 Hz Digital : VESA 1440 x 900 @60 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC 2B
0n Mode : 34 W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
With Stand Without Stand
Width 43.48 cm / 17.11 inches 43.48 cm / 17.11 inches
Height 36.99 cm / 14.56 inches 28.73 cm / 11.31 inches
Depth 22.60 cm /   8.89 inches 5.87 cm /   2.31 inches
Net 3.6 kg (7.94 lbs)
Tilt -5 ˚~20 ˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Attached (    ), Detached ( O )
Attached (    ), Detached ( O )
Wall-outlet type or PC-outlet type
Audio                               RMS Audio Output1W+1W(R+L)
Input Sensitivity0.7Vrms
Speaker Impedance16Ω
NOTE
Information in this document is subject to change without notice.
 
						

							A22
Specifications                                            L204WT/L204WTQ /L204WTX
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord 20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Digital
Signal Input 15 pin D-Sub Connector DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1680 x 1050 @ 60 Hz Digital : VESA 1680 x 1050 @ 60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B
0n Mode : 45W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
With Stand Without Stand
Width 46.62 cm / 18.35 inches 46.62 cm / 18.35 inches
Height 38.40 cm / 15.11 inches 30.54 cm / 12.02 inches 
Depth 22.60 cm /   8.89 inches 6.46 cm /   2.54 inches
Net 4.8 kg (10.58 lbs)
Tilt -5 ˚~20 ˚
AC 100-240V~ 50/60Hz 1.2A 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O )
Attached (     ), Detached ( O )
Wall-outlet type or PC-outlet type
 
						

							A23
Specifications                                                                   L204WTM
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
(without speaker)
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base 
Signal cable
Power cord 
20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)  Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B   
0n Mode:        45W(Typ.)
Sleep Mode≤1 W
Off Mode≤1 W
With Stand Without Stand
Width 46.62 cm / 18.35 inches 46.62 cm / 18.35 inches
Height 38.40 cm / 15.11 inches 30.54 cm / 12.02 inches 
Depth 22.60 cm /   8.89 inches 6.46 cm /   2.54 inches
Net 4.8 kg (10.58 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 1.2A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O )
Attached (     ), Detached ( O )
Wall-outlet type or PC-outlet type
Audio                              RMS Audio Output1W+1W(R+L)
Input Sensitivity0.7Vrms
Speaker Impedance16Ω
NOTE
Information in this document is subject to change without notice.
 
						

							A24
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15
**16640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1440 x 900
1440 x 900
1440 x 90031.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.500
55.935
70.63570
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
*Recommend Mode
**Only Analog Mode
Display Modes (Resolution)
Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
*11
**12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 105031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.29070
60
75
60
75
60
75
75
60
75
60
60
* 
Digital Recommend Mode
**Analog Recommend Mode
19 inch monitor
20.1 inch monitor
 
						

							A25
Signal Connector Pin Assignment
18
9
1724 16
Pin           Signal(DVI-D)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T. M. D. S. Data2-
T. M. D. S. Data2+
T. M. D. S. Data2/4 Shield
T. M. D. S. Data4-
T. M. D. S. Data4+
DDC Clock
DDC Data
Analog Vertical Sync.
T. M. D. S. Data1-
T. M. D. S. Data1+
T. M. D. S. Data1/3 Shield
T. M. D. S. Data3-
T. M. D. S. Data3+
+5V Power
Ground 
(return for +5V, 
H. Sync. and V. Sync.)
Pin           Signal(DVI-D)
16
17
18
19
20
21
22
23
24Hot Plug Detect
T. M. D. S. Data0-
T. M. D. S. Data0+
T. M. D. S. Data0/5 Shield
T. M. D. S. Data5-
T. M. D. S. Data5+
T. M. D. S. Clock Shield
T. M. D. S. Clock+
T. M. D. S. Clock-
T. M. D. S. (Transition Minimized Differential Signaling)
DVI-D Connector 
Specifications
Indicator
On Mode
Sleep Mode
Off Modeblue
amber
Off
LED Color
MODE
 
						

							A26
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
Kensington Security Slot
Connected to a locking 
cable that can be purchased
separately at most 
computer stores
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
2.Hold the body of the stand as shown in the image        and bend slightly to the
right.
3.Pull the stand to the direction as shown in the image         to separate.
4.Install the Wall mount plate.
REAR
REAR
FRONT
FRONTREARREAR
REAR
FRONT
FRONTREAR
2
2
1
1
 
						

							Digitally yours