LG Flatron L1942se Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
L1742S
L1942S
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being...

Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures...

A3
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor with its front facing downward on a soft cloth....

A4
Connecting the Display
Disassembling the stand
1.Put a cushion or soft cloth on aflat
surface.
3.Change your lock on the product as it follows and turn it in the arrow d\
irection.
2.Place the monitor face Down on
the cushion or soft cloth.
If you cant release the stand base even the locking knob is at a releas\
e
position, Please push the indicated knob down and retry it.
4.Pull out the Stand to remove.
 

A5
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range :  -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.
5.Pushing the PUSH button,...

A6
Using the Computer
1.Make sure to turn off the computer and  product. Connect the cable as be\
low sketch map
form to .1
2.Press        button on the front switch panel to turn the power on. When monitor power is turned on, the 
Self Image Setting Function is executed automatically.
2
Connecting the Display
Wall-outlet type
Power CordAnalog signal
D-sub
A
B
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
PC-outlet type
Mac adapterFor Apple Macintosh use, a  separate plug adapter is
needed to change...

Control Function
A7
Control Panel Functions
MENU ButtonUse this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU buttonfor several
seconds. The message " OSD LOCKED" appears.
You can unlock the OSD settings at any time by
pushing the  MENU button for several seconds. The
message " OSD UNLOCKED "...

A8
Control Panel Functions
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator changes
to flicker. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically...

A9
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the...