LG Flatron L1753hr Users Guide

Make sure to read the Important Precautionsbefore using the product. 
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
L1753H
L1953H
L1753HM
L1953HM
L1753HR
L1953HR
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which...

Connecting  the speakers - The feature is only for speaker models - L1753HM, L1953HM
A3
Connecting the speaker
1
. Place the monitor with its front facing downward on a soft cloth.
2.Insert the protruding hook of the speaker in the direction of the slot in the back of the product.
DC-OUTD-SUB
DVI-D
AC-IN
DC-OUTD-SUB
DVI-D
AC-IN
Hook
Slot
Audio DC-In
CableAUDIO IN
3. After setting up the speaker, connect the Audio DC-In Cable to the back of the product. 
DC-OUTD-SUB
DVI-D
AC-IN
Audio 
DC-OUT
 

A4
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Do not put your hand on the slide to avoid injury.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1. Place the monitor...

Connecting the Display
A5
1.Put a cushion or soft cloth on a flat surface.
To remove the Stand: 
2. 
Place  the  monitor  face  down  on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
*ownloadedMfromM•anual•onitorvcomM•anuals 

A6
Conne\fting the Displ\by\u
To remove the Stand Base:  
1.
Hold  the  body  of  the  St\bnd  \bs  it
follows.
3 .Pushing  L\bt\fh  inside,  T\bke  the  st\bnd
b\bse from st\bnd body.4.The  body  of  the  St\bnd  \bnd  the  St\bnd B\bse \bre su\f\fessfully \usep\br\bted.
2.Press  the  two  l\bt\fhes  \bt  the  s\bmetime \bs it follows.
*ownloadedMfromM•anual•onitorvcomM•anuals 

A7A7
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range:-5˚~20˚ Swivel :358˚
(The feature is not available for all countries)
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5...

A8
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
L1753HM / L1953HM Height Range : maximum 2.36 inch (60 mm)
60 mm
When you use speakers, be sure to set up the stop cover first as shown.
Then you use height function, the speakers will not touch the base cover.Note:
Stop cover is only for speaker models - L1753HM, L1953HM
stop cover
When adjusting height of the monitor, do...

A9
2
1
Connecting the Display
Using the Computer
1.Place the monitor in a convenient, well-ventilated location near your computer. 2.Connect the signal cable. When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cord into a proper power outlet  that is easily accessible and close to
the display.
Wall-outlet type
PC-outlet type
DVI-D(This feature is not available in all countries.)
MACPC
Power CordSignal Cable
Analog signalD-subDigital signalDVI
Varies according to model....