LG Flatron L1742pe Users Guide

							A20
Specifications L1742PE
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size: 
43.2cm
0.264 mm pixel pitch
Horizontal Freq.      Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B (Digital), DDC 2AB (Analog)
On Mode: 20 W(Typ.)
Sleep Mode≤0.5 W
Off Mode≤0.5 W
With Stand Without Stand
Width 36.96 cm / 14.55 inches 36.96 cm / 14.55 inches
Height 40.83 cm / 16.07 inches 31.51 cm / 12.41 inches
51.83 cm / 20.41 inches
Depth 24.16 cm / 9.51 inches 5.60 cm / 2.20 inches
Net 4.07 kg (9.04 lbs)
Tilt -6˚~17˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached(     ), Detached ( O )
Attached(     ), Detached ( O )
Wall-outlet type or PC-outlet type
 
						

							A21A21
Specifications L1942PE
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size: 
48.2cm
0.294 mm pixel pitch
Horizontal Freq.      Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green) 
Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B (Digital), DDC 2AB (Analog)
On Mode: 22 W(Typ.)
Sleep Mode≤0.5 W
Off Mode≤0.5 W
With Stand Without Stand
Width 40.63 cm / 16.00 inches 40.63 cm / 16.00 inches
Height 42.27 cm / 16.64 inches 34.45 cm / 13.56 inches
53.27 cm / 20.97 inches
Depth 24.16 cm / 9.51 inches 5.84 cm / 2.30 inches
Net 4.47 kg (9.93 lbs)
Tilt -6˚~17˚
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached(     ), Detached ( O )
Attached(     ), Detached ( O )
Wall-outlet type or PC-outlet type
 
						

							A22
Specifications
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12
**13640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 102431.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.97670
70
60
75
60
75
75
60
75
75
65
60
75
Indicator
On Mode
Sleep Mode
Off ModeBlue
Flicker
Off
LED Color
MODE
Preset Modes (Resolution)
* Recommend Mode
**Only Analog Mode
 
						

							A23
Installing the Wall mount plate
Wall mount plate (Separate purchase)
This is stand-type or will mount type and is connectable
with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is purchased.
Kensington Security SlotConnected to a locking 
cable that can be purchased separately at most 
computer stores
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
2.Separate the stand after firstly separating 4 screws by using a driver as figure.
3.Install the Wall mount plate.
- Be sure to use screws and a wall mount that
meet VESA standards.
- Using screws longer than those
recommended might damage the product.
- Using screws that do not meet VESA
standards might either damage the product or
result in it coming away from the wall.We will
not be held responsible for any damage
resulting from failure to follow these
instructions.
Mounting crew:
Interface pad thickness: 2.6mm
Screw : 
4mm x pitch 0.7mm x length 10mm
 
						

							Digitally yours