LG Flatron L1553s Users Guide

							Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for furture reference\
.
See the label attached on the product and give the information to your
dealer when you ask for service.
L1553S
User’s Guide
 
						

							A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of
this manual or listed on the display. If you are not sure what type of p\
ower supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your service
technician for replacement.
Do not Open the Display.There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended fo\
r an
extended period of time, unplug it from the wall outlet.
Important Precautions
 
						

							A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mer\
cury.
Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regula\
tions of
your local authority.
 
						

							Connecting the Display
A3
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it. Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand 
1. Place the monitor with its front facing downward on a soft cloth.
2.Assemble the Stand Body into the product in the correct direction as sho\
wn in the picture.
Make sure you push it until you hear it “click”. 
3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correc\
t direction.
4.Once assembled take the monitor up carefully and face the front side
R EA R
REA RR EA R
REA R
F R O NT
FR O NT
Stand BodyStand Base
Stand Body
 
						

							A4
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range :  -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.
 
						

							2
1
A5
Connecting the Display
Wall-outlet typeMAC
DC Power Cord
Mac adapterFor Apple Macintosh use, a  separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin  2 row connector.
4.Press        button on the front switch panel to turn the power on.When monitor power is turned on, the  Self Image Setting
Function is executed automatically.
(Only Analog Mode)
NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser
connects the monitor for the first time, this function automatically adj\
usts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish t\
o manually run this function once again, push
the ‘AUTO/SET’ button on the front panel of the monitor. Otherwise\
, you may execute the ‘ Factory reset’ option on
the OSD adjustment menu. However, be aware that this option initializes \
all the menu items except ‘Language’.
NOTE  This is a simplified representation of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
PC
Using the Computer
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer. 2.Connect the signal cable.  When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the adapter with the power cord , then the adapter is easily acc\
essible and  close to the display.
 
						

							A6
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A13.
Front Panel Controls Side 
 
						

							A7
Control Panel Functions
This Indicator lights up green or blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1024 x 768
Control Function
 
						

							Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the main menu of the OSD appears.
To access a control, use the    or Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the   /      Buttons to adjust the image to the desired level. Use the
AUTO/SET Button  to select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
A8
On Screen Display (OSD) Control Adjustment
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.
 
						

							A9
NOTEThe order of icons may differ depending on the model (A9~A13).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
PICTURE
COLOR
POSITION
TRACKING
SETUP
Main menu Sub menu                                  Reference
PRESET   6500K
9300K
RED
GREEN
BLUE
To adjust the brightness,
contrast and gamma of the
screen
To adjust the position of the
screen  To customize the color of the
screen
To customize the screen
status for a user's operating
environment To improve the clarity and
stability, sharpness of the
screen BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL CLOCK
PHASE
SHARPNESS
LANGUAGE
OSD
POSITION
WHITE  BALANCE
POWER INDICATOR
FACTORY RESET
HORIZONTAL
VERTICAL
: Adjustable
To select or customize 
desired image settingsF-ENGINEMOVIE / TEXT
USER
NORMAL