LG Flatron Ips236v Owners Manual
Have a look at the manual LG Flatron Ips236v Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 Control Panel Functions AUTO ButtonAUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTObutton before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is IPS226V/IPS236V : 1920 x 1080 INPUT Button Use this button to turn the display on or off. The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking blue.Power Button & Power Indicator When two input signals at least are connected, you can select the input signal (D-SUB/DVI/HDMI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. (SOURCE Hot key) Exit the OSD(On Screen Display). EXIT Button Use this button to select source from input.
11 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the discretionary Button, then the main menu of the OSD appears. To access a control, use the corresponding Buttons. Use the / Buttonsto adjust the image to the desired level. Use the Button to select other sub-menu items. Press the EXIT Buttonto exit from the OSD. 1 2 3 4
12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. BRIGHTNESS CONTRAST SHARPNESS BLACK LEVELPICTUREStandard image settings. : D-SUB(Analog signal) input : DVI-D(Digital signal) input : HDMI input Main menu Sub-menu Supported signalsDescription COLORColor temperature adjustments.COLOR TEMP SIX COLOR (RED/GREEN/ BLUE/CYAN/ MAGENTA/ YELLOW) HUE SATURATION RED GREEN BLUE WARM MEDIUM COOL (PRESET) (USER) HDMI LANGUAGE POWER INDICATOR WHITE BALANCE FACTORY RESETTo customize the screen status for a users operating environmentOTHERS HORIZONTAL VERTICAL CLOCK PHASE OVERSCANGAMMA COLOR RESETDISPLAYTo adjust the position of the screen DSUB DSUB DSUB To improve the clarity and stability of the screen VOLUMETo adjust the volume HDMI HDMI DSUB HDMIDVI-D DSUB HDMIDVI-D DSUB HDMIDVI-D DSUB HDMIDVI-D DSUB HDMIDVI-D
On Screen Display(OSD) Selection and Adjustment 13 NOTE The order of icons may differ depending on the model (12~22). USER MOVIE TEXT PHOTO sRGBMODE It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the standard sRGB. It is a mode that the screen is adjusted to the best for the text works. It is a mode that the screen is adjusted to the best to view pictures. It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu. ORIGINAL RATIO DUAL WEB CINEMA MODESMART+To adjust the image sizeDSUB HDMIDVI-D DSUB HDMIDVI-D DSUBDVI-D Main menu Sub-menu Supported inputDescription
14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button Tip Exit Adjust (Decrease/Increase) Select another sub-menu Restart to select sub-menu Press the MENUButton, then the main menu of the OSD appears.
15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit: Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVELTo adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. You can set the offset level. If you select HIGH, the screen will be bright and if you select ‘LOW’, the screen will be dark. (only for HDMI input) * Offset?As the criteria for video signal, it is the darkest screen the monitor can show.
16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description COLOR TEMP PRESET Select either PRESET or USER to adjust the screen color. Select the preset color temperature. WARM: Yellow screen color. MEDIUM: Red screen color. COOL: Blue screen color. USER GAMMA COLOR RESETSIX COLOR Sets and stores the hue and saturation for six colors(RED/GREEN/BLUE/CYA N/ MAGENTA/YELLOW) to satisfy the color requirements of a user. HUEAdjusts the screen hue. SATURATION Adjusts the color sharpness on the screen. Lower values make the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors darker. REDSet your own red color levels. GREENSet your own green color levels. BLUESet your own blue color levels. Set your own gamma value. : 1.8/2.0/2.2/2.4/2.6 On the monitor, high gamma values display whitish images and low gamma values display blackish images. Resets the color settings to the factorydefault settings for the current input device. PRESET Mode USER Mode Exit: Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu
17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE OVERSCAN To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To select the range of output image for DTV timing in HDMI input. (only for HDMI input) Recommend overscanfunction to turn on when connect AVequipment. HORIZONTAL VERTICALTo move image left and right. To move image up and down. Exit: Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu VOLUME To adjust the volume of headphone/ Earphone. (Only for HDMI input) Exit: Exit : Decrease : Increase : Mute : Restart to select sub-menu
18 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. Main menu Sub menu Description To choose the language in which the control names are displayed.LANGUAGE WHITE BALANCE If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Restore all factory default settings except LANGUAGE. FACTORY RESET POWER INDICATOR Use this function to set the power indicator on the front side of the monitor to ONor OFF. If you set OFF, it will be turned off. If you set ONat any time, the power indicator will automatically be turned on. NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. Exit: Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu
19 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button Tip Exit Move Restart to select sub-menu Press the SMART+Button, then the main menu of the OSD appears.