LG Flatron Ips206t Owners Manual

20
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Switch to full screen mode according to input 
image signal. 
*This function works only if input resolution is 
lower than monitor ratio (16:9).
Make the eye comfortable by reducing the   background brightness in the web page.
* Before using below functions, please install Easy Set Package program.
Help user to browse web efficiently by dividing in half. 
Help to arrange and move windows on screen.
Help user to control...

21
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Move
Restart to select sub-menu
Press the MODEButton, then the main menu of the OSD appears.
 

22
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit,     : Move
: Select another sub-menu
MOVIE
It is a mode that the screen is adjusted
to the best to view the videos.
TEXT
PHOTO USER
sRGB
It is a mode that the screen is adjusted
to the best for the text works.
It is a mode that the screen is adjusted
to the best to view pictures.It is a mode that the user can adjust
each element. It can adjust the color
mode of the Main Menu.
It is a mode that the screen is...

23
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving...

24
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTObutton to automatically adjust
your display image...

25
Troubleshooting
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor...

26
Specifications                                                          IPS206T
50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 50.8cm
0.2766 x 0.2766 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1600 x 900 @ 60 Hz...

27
Specifications                                                          IPS226T
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.6cm
0.248 x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x 1080 @ 60 Hz...

28
Specifications
Preset Modes (Resolution)
Indicator
On Mode
Sleep Mode
Off ModeBlue
Blue Blinking 
Off
LED Color
MODE
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
* Recommend Mode
IPS206T
1
2
3
4
5
6
7
8
*9720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1600 x 90031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
60.00070
60
75
60
75
60
75
75
60
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
* Recommend Mode...

29
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate
or the interchange device.
1.Place the monitor face down on the soft cloth.
2.When you desire to disintegrate the monitor from the stand base, use a coin to turn the
screw counterclockwise.
3.Pull out the Stand Base to remove. 
4.Remove the Stand Body.