LG Flatron E2381vr Owners Manual

OWNER’S MANUAL
LED LCD MONITOR 
LED LCD MONITOR MODEL
E2281TR
E2281VR
E2381VR
www.l\f.com
Ple\fse re\fd \bhis m\fnu\fl c\frefully before oper\f\bing
your se\b \fnd re\b\fin i\b for fu\bure reference.
ENGLISH
 

1
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical  shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards...

2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may...

Important Precautions
3
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene,...

4
Accessories
!!! Thank for selecting LGE products !!! 
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
NOTEThis accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
Owners Manual/Cards
Power Cord15-pin D-Sub Signal Cable
DVI-D Signal Cable
(This feature is not available in
all countries.)...

5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off. 
Positioning your display
-After installation, adjust the angle as shown below. 
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚ to 15˚
IMPORTANT
It is recommended that in order to maintain an ergonomic and
comfortable viewing position, the forward tilt angle of the monitor should
not exceed 5 degrees.
Do not...

6
Connecting the DisplayE2281TR
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
Wall-outlet type
Varies according to model.
NOTE  This is a simplified representation of the rear view.
This rear view...

Connecting the DisplayE2281TR
7
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve...

8
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
Wall-outlet type
Varies according to model.
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your...

Connecting the DisplayE2281VR/E2381VR
9
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to...