LG Flatron E2360t Owners Manual

							30
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
: Move to the upper menu,    : Move
EXIT: Exit
 
						

							31
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALThe PhotoEffect function is disabled.
GAUSSIAN
BLURThis menu changes the screen to be more
colorful and smoother. 
SEPIAThis menu changes the screen to be
Sepia tone (brown color). 
MONOCH
-ROMEThis menu changed the screen to be
Gray tone(black-and-white Picture) .
: Move to the upper menu,    : Move
EXIT: Exit
 
						

							32
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							33
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the resolution
were changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred
and the screen may be dimmed, truncated or biased. Make sure to select the recommend
resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 
 
						

							34
Troubleshooting
The Audio function is not working
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Picture OK & No sound.• Check whether volume is 0.
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							35
Specifications                                                          \
E1960S
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
MaxVESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode :17 W(Typ.)Sleep Mode
≤1.0 W
Off Mode ≤0.5 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20  ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     44.20 cm  (17.40 inch) 
Height 35.53 cm  (13.99 inch)     
Depth 16.20 cm  (6.38 inch)
Weight(excl. packing)  1.8 kg (3.97 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width     44.20 cm  (17.40 inch) 
Height 35.10 cm  (13.82 inch)  
Depth 3.10 cm  (1.22 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
 
						

							36
Specifications                                                          \
E1960T
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode :17 W(Typ.)Sleep Mode
≤1.0 W
Off Mode ≤0.5 WPower
Consumption
Operating Conditions
Temperature 10  ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20  ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     44.20 cm  (17.40 inch) 
Height 35.53 cm  (13.99 inch)     
Depth 16.20 cm  (6.38 inch)
Weight(excl. packing)  1.8 kg (3.97 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B(Digital),DDC2AB(Analog)
Without Stand
Width     44.20 cm  (17.40 inch) 
Height 35.10 cm  (13.82 inch)  
Depth 3.10 cm  (1.22 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
 
						

							37
Specifications                                                          \
E2060S
50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 50.8cm
0.2766 mm x 0.2766 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
MaxVESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 HzResolution
Plug&Play
On Mode :21 W(Typ.)Sleep Mode
≤1.0 W
Off Mode ≤0.5 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20  ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     47.40 cm  (18.66 inch) 
Height 37.30 cm  (14.69 inch)     
Depth 16.20 cm  (6.38 inch)
Weight(excl. packing)  2.0 kg (4.41 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width     47.40 cm  (18.66 inch) 
Height 36.88 cm  (14.52 inch)  
Depth 3.10 cm  (1.22 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
 
						

							38
Specifications                                                          \
E2060T
50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 50.8cm
0.2766 mm x 0.2766 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
MaxVESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 HzResolution
Plug&Play
On Mode :21 W(Typ.)Sleep Mode
≤1.0 W
Off Mode ≤0.5 WPower
Consumption
Operating Conditions
Temperature 10  ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20  ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     47.40 cm  (18.66 inch) 
Height 37.30 cm  (14.69 inch)     
Depth 16.20 cm  (6.38 inch)
Weight(excl. packing)  2.0 kg (4.41 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B(Digital),DDC2AB(Analog)
Without Stand
Width     47.40 cm  (18.66 inch) 
Height 36.88 cm  (14.52 inch)  
Depth 3.10 cm  (1.22 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
 
						

							39
Specifications                                                          \
E2260S
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.6cm
0.248 mm x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
MaxVESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 HzResolution
Plug&Play
On Mode :26 W(Typ.)Sleep Mode
≤1.0 W
Off Mode ≤0.5 WPower
Consumption
Operating Conditions
Temperature 10  ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20  ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     50.88 cm (20.03 inch) 
Height 39.24 cm (15.45 inch)     
Depth 17.20 cm (6.77 inch)
Weight(excl. packing)  2.3 kg (5.07 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       3.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width     50.88 cm (20.03 inch) 
Height 38.74 cm (15.25 inch)   
Depth 3.10 cm (1.22 inch)
NOTE
Information in this document is subject to change without notice.
Type FSP036-DGAA1, manufactured by FSP Electronic
or type LCAP07F, manufactured by Lienchange ElectronicsAC-DC Adapter