LG Flatron E2351t Owners Manual

E2251VR
E2351VR
E1951C
E2051C
E2251C
www.lg.com
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating 
your set and retain it for future reference.
LED LCD MONITOR MODELS
ENGLISH
E1951T
E2051T 
E2251T 
E2351T
E2351TC
E1951S  
E2051S 
E2251S
E2251VQ
E2351VQ
 

2
ENGENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLING AND 
PREPARING
3 Unpacking
4 Parts and buttons
6 Setting up the Monitor 
6 - Assembling the Stand Body and Base
7 - Mounting on a table
8 - Detaching the Stand Base and the 
Stand Body
9
 - Mounting on a wall
11 USING THE MONITOR
11 Connecting to a PC
11 - D-SUB connection
12 - DVI-D connection
13 - HDMI connection
14 CUSTOMIZING SETTINGS
14 Accessing The Main Menus
15 Customizing Settings
15 - MENU Settings
16 - SUPER ENERGY SA VING Settings
17 -...

3
ENGENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
 accessories, contact the local 
dealer where you purchased your product. The illustrations in this manual may differ from the actual product 
and accessories.
 yDo not use any unapproved accessories to ensure the safety and product l\
ife span.
 yAny damages or injuries by using unapproved accessories are not covered \
by the warranty. 
 yThe accessories...

4
ENGENGLISH
ASSEMBLING AND PREPARING
HDMI
D-SUB
DVI-DDC-IN /C

5
ENGENGLISH
ASSEMBLING AND PREPARING
ButtonDescription
MENU Accesses the main menus.(See p.15)
Left First Button OSD LOCKED/
UNLOCKEDThis function allows you to lock the current control settings, so 
that they cannot be inadvertently changed.
Press and hold the Left First Button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing the 
 
Left First Button for several seconds. The message "OSD 
UNLOCKED" should appear.
SUPER+...

6
ENGENGLISH
ASSEMBLING AND PREPARING
Stand Body
Stand Base
Setting up the Monitor 
Assembling the Stand Body and Base
1 Place the Monitor with the screen side down on 
a flat and cushioned surface.
3 Secure the Stand Body the monitor using 2 
screws.
Coin
2 Attach the Stand Body from the Monitor.
Insert the two  Lockers of the Stand Body  right 
into the groove of the Monitor head and secure 
them by pressing the left and right bottom 
sides.
Locker
4 Check the direction of the Stand Base and 
assemble...

7
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the Monitor into its upright position 
on a table.
Leave a 10 cm (minimum) space from the wall 
for proper ventilation.
10 cm
10 cm10 cm
10 cm
Disconnect the power cord first, and then move
or install the Monitor. Otherwise electric
shock may occur.
CAUTION
2 Connect the AC-DC 
Adapter and Power Cord 
to a wall outlet.
DC-IN /
C

8
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system 
The Kensington security system connector is 
located at the back of the Monitor. For more 
information of installation and using, refer to the 
manual supplied with the Kensington security 
system or visit 
http://www.kensington.com.
Connect the Kensington security system cable 
between the Monitor and a table.
The Kensington security system is optional. 
You can obtain it from most electronics stores.
NOTE
Detaching the Stand...

9
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
ModelE1951S
E2051S
E2251S
E1951T
E2051T
E2251T
E2351T
E2351TC
E1951C
E2051C
E2251C
E2251VR
E2351VR
E2251VQ
E2351VQ
VESA (A x B) 75  x 75
Screw Size M4
Number of screws 4
Wall mount bracket 
(optional) RW120
If...

10
ENGENGLISH
ASSEMBLING AND PREPARING
 yDisconnect the power cord first before 
moving or installing the Monitor. Otherwise 
electric shock may occur.
 yIf you install the Monitor on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 yUse only an authorized LG wall mount and 
contact a local dealer or qualified personnel.
 yDo not over tighten the screws as this may 
cause damage to the Monitor and void your 
warranty. 
 yUse only screws and wall mounts that 
meet the VESA standard....