LG Flatron E2290v Owners Manual

							10
On Screen Display (OSD) Control Adjustment  
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary button, then the main menu of the OSD appears.
To access a control, use the corresponding buttons.
Use the      /    buttons to adjust the image to the desired level. 
Use the        button to select other sub-menu items.
Press the EXIT Button to exit from the OSD. 1
2
3
4
 
						

							11
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustm\
ent,
and setting menus.
NOTE The order of icons may differ depending on the model (11 to 19).
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) input
: HDMI signalD-SUB
DVI-DHDMI
LANGUAGE 
ORIGINAL RATIO
RTC
SOUND
POWER INDICATOR
BUTTON INDICATOR
FACTORY RESETTo customize the screen status
for a users operating
environmentOTHERS
COLOR TEMP 
GAMMACOLORTo customize the color of the
screen
BRIGHTNESS
CONTRAST
SHARPNESS
WHITE BALANCE
BLACK LEVELPICTURETo adjust the brightness,
contrast, sharpness, white
balance and black level of the
screen
VOLUMETo adjust the headphone/
earphone volume
HDMI
HDMI
DVI-DHDMI
DVI-DHDMI
DVI-DHDMI
RED
GREEN
BLUE(PRESET)                (USER)sRGB6500K 
7500K
8500K 
9300K
Main menu Sub-menu            Supported inputDescription
VOLUME
D-SUB
D-SUB
D-SUB
D-SUB
F-ENGINETo select or customize desired
image settings
HDMI
NORMAL
MOVIE
INTERNET
STANDARD
MOVIE
GAME
SPORTSDSUBDVI-D
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROMEPHOTO
EFFECTDSUBDVI-DHDMI
To adjust the screen color mode
 
						

							12
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item \
using the
OSD system. Listed below are the icons, icon names, and icon description\
s of the
all items shown on the Menu.Sub-
menus
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
Menu Name Icons
Button
Tip
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
Main menuSub menu Description
BRIGHTNESS
CONTRAST 
SHARPNESS
WHITE
BALANCE
BLACK LEVEL To adjust the brightness of the
screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
If the output of the video card is
different from the required
specifications, the color level may
deteriorate due to video signal
distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video
card in order to provide the optimal
image.
Activate this function when white and
black colors are present in the
screen.
(only for D-SUB input)
You can set the offset level. If you select

HIGH, the screen will be bright and if
you select ‘ LOW’, the screen will be
dark. 
(only for HDMI input)
* Offset?
As the criteria for video signal, it is the
darkest screen the monitor can show.
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
NOTE  
If this does not improve the screen image, restore the factory default s\
ettings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal\
 is an analog
signal. 
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
PRESETSelect the screen color. • sRGB: Set the screen color to fit the sRGB standard color
specification.
•  6500K to 7500K: Slightly reddish white.
•  8500K to 9300K:   Slightly bluish white.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
COLOR TEMP
USER
Main menu Sub menu Description
PRESET Mode
USER Mode
Select either PRESET or USER to
adjust the screen color. 
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Main menuSub menu Description
: Move to the upper menu,    : Move
Select this when you want to use the
product in the most general using
environment. 
Select this when you are watching a
video or movie.
Select this when you want to use the
original standard video.
* In the General (Standard) mode, the              
is turned off.
NORMAL
STANDARD
MOVIE
D-SUB/DVI-D input
HDMI input
D-SUB/DVI-D input HDMI input
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
Main menuSub menu Description
: Move to the upper menu,    : Move
Select this when you are working on
the document (Word etc.)
Select this when you are playing a
game.
Select this when you watching general
sports.
INTERNET
GAME
SPORTS
D-SUB/DVI-D input
HDMI input
HDMI input
 
						

							On Screen Display(OSD) Selection and Adjustment 
17
•
Main menuSub menu Description
NORMALThe PhotoEffect function is disabled.
GAUSSIAN
BLURThis menu changes the screen to be more
colorful and smoother. 
SEPIAThis menu changes the screen to be
Sepia tone (brown color). 
MONOCH
-ROMEThis menu changed the screen to be
Gray tone(black-and-white Picture) .
: Move to the upper menu,    : Move
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
VOLUMETo adjust the volume of headphone/
Earphone.
(Only for HDMI input)
: Move to the upper menu
: Decrease
: Increase
: Mute
Main menu Sub menu Description
HDMI input
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menuSub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
BUTTON
INDICATOR
Use this function to set the control key
indicator on the stand base of the
monitor to  ON or OFF.
If you set OFF, it will be turned off. 
If you set ON, it will be turned on.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET
POWER
INDICATOR
Use this function to set the power
indicator on the stand base of the
monitor to 
ONor OFF.
If you set OFF, it will go off. 
If you set ON at any time, the power
indicator will automatically be turned on.
To adjust the image size.ORIGINAL
RATIO
If you set ON, you enable the
Response Time Control function and
reduce the afterimage of the screen.
If you set OFF, you disable the
Response Time Control function and
operate at panel response time.RTC
To select or turn off the Buzzer sound.
The Buzzer sound operates in below
cases:
•  DC power On/Off
•  AC power On
•  Monitor Setup OSD On/Off
•  Menu OSD On/OffSOUND
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu