LG Flatron E2281vr Owners Manual

							10
Control Panel Functions
Front Panel Controls
E2281VR/E2381VR E2281TR/E2281VR/E2381VR
 
						

							11
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTObutton on the MONITOR SETUP OSD. (Only
Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1920 x 1080
SUPER ENERGY
SAVING ButtonUse this button to enter SUPER ENERGY SAVING
menu.For more information, refer to page 24 to 26.
MENU Button
(Only for HDMI input)
VOLUME ButtonTo adjust the volume of headphone/speaker.
SUPER+ 
RESOLUTION
ButtonFor more information, refer to page 22 to 23.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear. Use this button to enter or exit from the On Screen Display.
 
						

							12
Control Panel Functions
INPUT Button
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is red. Power Button &
Power Indicator
(SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub. Use this button to select source from input. 
 
						

							13
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size and operating parameters of
the display is quick and easy with the On Screen Display Control
system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     /       Buttonsto adjust the image to the desired level. 
Use the       Button to select other upper menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
E2281TR
 
						

							14
On Screen Display (OSD) Control Adjustment   
Screen Adjustment
Making adjustments to the image size and operating parameters of
the display is quick and easy with the On Screen Display Control
system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     /       Buttonsto adjust the image to the desired level. 
Use the       Button to select other upper menu items.
Press the EXIT Buttonto exit from the OSD. 
HIGH
1
2
3
4
E2281VR/E2381VR
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To customize the screen status
for a users operating
environment To adjust the black level of the
screen To customize the color of the
screen
MENUTo adjust the brightness of the
screen
NOTE 
The order of icons may differ depending on the model (15 to 26).
To adjust the image size
Main menu Sub-menu            Supported inputDescription
BRIGHTNESS
ORIGINAL RATIO
COLOR PRESET 
(WARM/MEDIUM/COOL)
BLACK LEVEL
LANGUAGE
SOUND
FACTORY RESET
SUPER
ENERGY
SAVINGTurn on the SUPER ENERGY
SAVING function.
Turn off the SUPER ENERGY
SAVING function.
Initialize the SUPER ENERGY
SAVING and set to OFF mode.
ON
OFF
RESET
VOLUMETo adjust the volumeHDMI
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) input
: HDMI signalDSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
HDMI
NORMAL
LOW
MEDIUM
HIGHSUPER+
RESOLUTIONThe image is inevitably damaged
during the date processing to
enlarge the image. SUPER+
RESOLUTION can maintain the
resolution to show the clear video
image even with the enlargement
with the picture quality
improvement technology that
adjusts the blurred focus and
rough outline due to the
enlargement.
DVI-DHDMI
D-SUB
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu
Name
Button
Tip
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Press the MENUButton, then the main menu of the OSD appears.
E2281TR
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
HIGH
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu
Name
Button
Tip
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Press the MENUButton, then the main menu of the OSD appears.
E2281VR/E2381VR
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu                Description
To adjust the brightness of the screen. 
HIGH
E2281TR
E2281VR/E2381VR
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
HIGH
E2281TR
E2281VR/E2381VR
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit: Exit
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
WARM
MEDIUM
Main menu Sub menu                Description
3
HIGH3
E2281TR
PRESET
E2281VR/E2381VRCOOLSet the screen to warm color 
temperature .
Set the screen to cool color 
temperature. Set the screen to medium  
color temperature.
You can set the offset level. If you
select HIGH, the screen will be bright
and if you select ‘LOW’, the screen
will be dark. (only for HDMI input)
* Offset?As the criteria for video
signal, it is the darkest screen the
monitor can show.
(Only HDMI input)
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit: Exit