LG Flatron E2260v Owners Manual

www.lg.com
OWNER’S MANUAL
LED LCD MONITOR 
LE\f LC\f MONITOR MO\fELS
Please  read  t\fis  man\bal  caref\blly  before  operating  yo\br  set  and 
retain it for f\bt\bre reference.
ENGLISH
E1960S
E2060S
E2260S
E2360S
E1960T
E2060T
E2260T
E2360T
E2260V
E2360V
  

1
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical  shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards...

2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may...

Important Precautions
3
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene,...

4
Accessories
Owners Manual/Cards
Power Cord
15-pin D-Sub Signal Cable
(To set it up, this signal cable may be
attached to  this product before
shipping out.)
DVI-D Signal Cable
(This feature is not available in
all countries.)
NOTEThis accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
AC-DC adapter
(Depending on the country)
!!! Thank for selecting LGE...

Connecting the Display
5
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor face down on the cushion or soft cloth.
3.Attach the monitor to the Stand Baseby turning the screw to the right.
4.Once assembled take the monitor up carefully and face the front side.
2.Assemble the Stand Baseinto the Stand Bodyin the correct direction as shown in the picture. 
Stand BaseStand Body
Screw :...

6
Connecting the Display
IMPORTANT
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
Turn the screw to the left to separate the stand body
from the stand base. 
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your...

7
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution. 
AConnect D-sub(Analog...

8
Connecting the DisplayE1960T/E2060T/E2260T/E2360T
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function...

Connecting the DisplayE2260V/E2360V
9
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 
Connect HDMI Cable
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
NOTE  This is a simplified representation of the rear view.
This rear view represents a general...