LG Flatron E2260s Owners Manual
Have a look at the manual LG Flatron E2260s Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
30 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Change the input image signal ratio to original. WIDE ORIGINALSwitch to full screen mode according to input image signal. * This function works only if input resolution is lower than monitor ratio (16:9). : Move to the upper menu, : Move EXIT: Exit
31 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description NORMALThe PhotoEffect function is disabled. GAUSSIAN BLURThis menu changes the screen to be more colorful and smoother. SEPIAThis menu changes the screen to be Sepia tone (brown color). MONOCH -ROMEThis menu changed the screen to be Gray tone(black-and-white Picture) . : Move to the upper menu, : Move EXIT: Exit
32 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator blinking? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button?
33 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTObutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V positionicon in the on screen display. • Press the AUTObutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCKicon in the on screen display. • Press the AUTObutton to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASEicon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
34 Troubleshooting The Audio function is not working Display image is incorrect The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Picture OK & No sound.• Check whether volume is 0. • Check sound muted. • HDMI cable installed properly. • Head phone cable installed properly. • Check sound format. Not supply to compressed sound format. Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? Have you installed the display driver?• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. • Make sure to check if the video card supports Plug&Play function.
35 Specifications \ E1960S 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0cm 0.300 mm x 0.300 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Sync Input Signal Input15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input MaxVESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 HzResolution Plug&Play On Mode :17 W(Typ.)Sleep Mode ≤1.0 W Off Mode ≤0.5 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.20 cm (17.40 inch) Height 35.53 cm (13.99 inch) Depth 16.20 cm (6.38 inch) Weight(excl. packing) 1.8 kg (3.97 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range 12 V 2.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 44.20 cm (17.40 inch) Height 35.10 cm (13.82 inch) Depth 3.10 cm (1.22 inch) NOTE Information in this document is subject to change without notice. Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
36 Specifications \ E1960T 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0cm 0.300 mm x 0.300 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 HzResolution Plug&Play On Mode :17 W(Typ.)Sleep Mode ≤1.0 W Off Mode ≤0.5 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.20 cm (17.40 inch) Height 35.53 cm (13.99 inch) Depth 16.20 cm (6.38 inch) Weight(excl. packing) 1.8 kg (3.97 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range 12 V 2.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Analog) Without Stand Width 44.20 cm (17.40 inch) Height 35.10 cm (13.82 inch) Depth 3.10 cm (1.22 inch) NOTE Information in this document is subject to change without notice. Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
37 Specifications \ E2060S 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8cm 0.2766 mm x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Sync Input Signal Input15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input MaxVESA 1600 x 900 @ 60 Hz Recommend VESA 1600 x 900 @ 60 HzResolution Plug&Play On Mode :21 W(Typ.)Sleep Mode ≤1.0 W Off Mode ≤0.5 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 47.40 cm (18.66 inch) Height 37.30 cm (14.69 inch) Depth 16.20 cm (6.38 inch) Weight(excl. packing) 2.0 kg (4.41 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range 12 V 2.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 47.40 cm (18.66 inch) Height 36.88 cm (14.52 inch) Depth 3.10 cm (1.22 inch) NOTE Information in this document is subject to change without notice. Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
38 Specifications \ E2060T 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8cm 0.2766 mm x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input MaxVESA 1600 x 900 @ 60 Hz Recommend VESA 1600 x 900 @ 60 HzResolution Plug&Play On Mode :21 W(Typ.)Sleep Mode ≤1.0 W Off Mode ≤0.5 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 47.40 cm (18.66 inch) Height 37.30 cm (14.69 inch) Depth 16.20 cm (6.38 inch) Weight(excl. packing) 2.0 kg (4.41 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range 12 V 2.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Analog) Without Stand Width 47.40 cm (18.66 inch) Height 36.88 cm (14.52 inch) Depth 3.10 cm (1.22 inch) NOTE Information in this document is subject to change without notice. Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicAC-DC Adapter
39 Specifications \ E2260S 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6cm 0.248 mm x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Sync Input Signal Input15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input MaxVESA 1920 x 1080 @60 Hz Recommend VESA 1920 x 1080 @60 HzResolution Plug&Play On Mode :26 W(Typ.)Sleep Mode ≤1.0 W Off Mode ≤0.5 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 50.88 cm (20.03 inch) Height 39.24 cm (15.45 inch) Depth 17.20 cm (6.77 inch) Weight(excl. packing) 2.3 kg (5.07 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range 12 V 3.0 APower Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 50.88 cm (20.03 inch) Height 38.74 cm (15.25 inch) Depth 3.10 cm (1.22 inch) NOTE Information in this document is subject to change without notice. Type FSP036-DGAA1, manufactured by FSP Electronic or type LCAP07F, manufactured by Lienchange ElectronicsAC-DC Adapter