LG Flatron E2250v Users Guide

							10
Connecting the Display
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 
Connect HDMI Cable
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
Wall-outlet type
OR
Wall-outlet type
Mac adapter :For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2
row connector.
When using a D-Sub signal input cable connector
for Macintosh 
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
Varies according to model.
C
Headphone/Earphone Input
AV equipment(Set-Top Box, DVD, Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
DVI-D (This feature is not available in all countries.)
 
						

							Connecting the Display
11
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution. 
3.Press the power button on the front panel to turn the power on. When monitor power is
turned on, the Self Image Setting Functionis executed automatically.
(Only Analog Mode)
Power Button
Connecting with the PC 
 
						

							12
Control Panel Functions
Front Panel Controls
SMART+ ButtonUse this button to enter AUTO BRIGHT,ORIGINAL
RATIO, DUAL WEB,CINEMA MODEmenus.
For more information, refer to page 20~22.
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
ButtonFor more information, refer to page 23~25.ENGINE
 
						

							13
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTObutton before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2250V/E2350V : 1920 x 1080
INPUT Button
Use this button to turn the display on or off.
From front view,the power indicator stays purple if the 
display is running properly (On Mode). If the display 
is in Sleep Mode (Energy Saving), the power indicator 
is blinking purple. Power Button &
Power Indicator
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.  (SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
This is lens for light sensor detect outside luminance,
when setting AUTO BRIGHT ON.Light Sensor
Use this button to select source from input. 
 
						

							14
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustm\
ent, 
and setting menus.
NORMAL 
MOVIE
INTERNET
DEMO 
STANDARD 
MOVIE
GAME
SPORTSF-ENGINETo select or customize desired 
image settings
: D-SUB(Analog signal) input  
: DVI-D(Digital signal) input
: HDMI signalDSUB
DVI-D
DSUBDVI-D
LANGUAGE > ENGLISH 
POWER INDICATOR
BUTTON INDICATOR 
WHITE BALANCE
FACTORY RESETTo customize the screen status 
for a users operating
environmentOTHERS
HORIZONTAL 
VERTICAL 
CLOCK 
PHASE 
OVERSCANDISPLAYTo adjust the position of the 
screen  
COLOR TEMP (PRESET / USER)
GAMMACOLORTo customize the color of the 
screen
BRIGHTNESS 
CONTRAST
SHARPNESS 
BLACK LEVELPICTURETo adjust the brightness, contrast 
and sharpness of the screen
NOTE  The order of icons may differ depending on the model (15~25).
DSUB
DSUB
DSUB
Main menu Sub-menu            Supported inputDescription
To improve the clarity and 
stability of the screen 
VOLUMETo adjust the volume
AUTO BRIGHT 
ORIGINAL RATIO 
DUAL WEB 
CINEMA MODESMART+To adjust the image size
HDMI
HDMI
HDMI
HDMI
HDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUB
DVI-DHDMI
DSUBDVI-D
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
: Decrease 
: Increase 
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST  
SHARPNESS
BLACK LEVEL To adjust the brightness of the screen.  
To adjust the contrast of the screen.
To adjust the clearness of the screen.
You can set the offset level. If you select 
HIGH, the screen will be bright and if you
select ‘LOW’, the screen will be dark. 
(only for HDMI input) 
* 
Offset? As the criteria for video signal, it
is the darkest screen the monitor can 
show.
PRESETSelect the screen color. 
• sRGB: Set the screen color to fit the sRGB standard color 
specification.
• 6500K-7500K: Red screen color. 
• 8500K-9300K: Blue screen color. 
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA Set your own gamma value. : 0 / 1 / 2 
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
COLOR TEMP
USER
Exit : Exit
: Decrease 
: Increase 
: Select another sub-menu
: Restart to select sub-menu
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
OVERSCAN
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To select the range of output image
for DTV timing in HDMI input.
(only for HDMI input)
Recommend overscanfunction to
turn on when connect AVequipment.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
VOLUME
To adjust the volume of headphone/
Earphone.
(Only for HDMI input)
Exit: Exit
: Decrease
: Increase
: Mute
: Restart to select sub-menu
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
BUTTON
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will be turned off.
If you set ONat any time, the power
indicator will automatically be turned on.
Use this function to set the control key
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will be turned off. 
If you set ON, it will be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu