LG Flatron E2240s Owners Manual

20
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image....

21
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MODEButton, then the main menu of the OSD...

22
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALSelect this when you want to use the product
in the most general using environment. 
MOVIE
Select this when you are watching a video or
movie.
INTERNETSelect this when you are working on the
document (Word etc.)
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the...

23
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
Exit: Exit,    : Move
: Restart to select sub-menu
 

24
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALThe PhotoEffect function is disabled.
GAUSSIAN
BLURThis menu changes the screen to be more
colorful and smoother. 
SEPIAThis menu changes the screen to be
Sepia tone (brown color). 
MONOCH
-ROMEThis menu changed the screen to be
Gray tone(black-and-white Picture) .
Exit: Exit,    : Move
: Restart to select sub-menu
 

25
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving...

26
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTObutton to automatically adjust
your display image...

27
Display image is incorrect
Troubleshooting
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor...

28
Specifications                                                          E1940T
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Composite, DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1360 x...

29
Specifications                                                          E1940S
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Composite Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60...