LG Flatron E2211t Owners Manual

							20
On Screen Display(OSD) Selection and Adjustment
SUPER SAVING
LED SAVING
19 inch
3
34
155
17 22 inch 24 inch
Saving Data depends on the Panel. So,those values should be different from
each panel and panel vendor.
LG accumulate those values using integrated function with 10 minutes
broadcast video signal.
LED Saving means that how much power can be saved using WLED Panel
instead of CCFL panel.
SUPER Saving means that how much power can be more saved using
SUPER ENERGY SAVING function. 
NOTE
SAVING DATA(W/h):
 
						

							21
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							22
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 
 
						

							23
Display image is incorrect
Troubleshooting
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							24
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1366 x 768 @ 60 Hz
Recommend VESA 1366 x 768 @ 60 HzResolution
Plug&Play
On Mode:18 W(Typ.)Sleep Mode <        0.3 W
Off Mode <        0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    44.2 cm ( 17.42 inch ) 
Height 35.8 cm ( 14.09 inch )     
Depth 17.0 cm (   6.69 inch )
Weight(excl. packing) 2.8 kg ( 6.19 lb )Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 0.8 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B(Digital),DDC 2AB(Analog)
Without Stand
Width 44.2 cm ( 17.42 inch ) 
Height 26.7 cm ( 10.51 inch )   
Depth 6.1 cm (    2.40 inch )
NOTE
Information in this document is subject to change without notice.
Specifications                                                                    E1911T
 
						

							25
Specifications                                                                    E1911S
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1366 x 768 @ 60 Hz
Recommend VESA 1366 x 768 @ 60 HzResolution
Plug&Play
On Mode:18 W(Typ.)Sleep Mode <        0.3 W
Off Mode <        0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    44.2 cm ( 17.42 inch ) 
Height 35.8 cm ( 14.09 inch )     
Depth 17.0 cm (   6.69 inch )
Weight(excl. packing) 2.8 kg ( 6.19 lb )Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 0.8 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width 44.2 cm ( 17.42 inch )
Height 26.7 cm ( 10.51 inch )   
Depth 6.1 cm (    2.40 inch )
NOTE
Information in this document is subject to change without notice.
 
						

							26
Specifications                                                                    E2211T
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.6 cm0.248 mm x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 HzResolution
Plug&Play
On Mode:28 W(Typ.)Sleep Mode <        0.3 W
Off Mode <        0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    50.9 cm ( 19.80 inch )  
Height 39.9 cm ( 15.70 inch )     
Depth 21.0 cm (   8.26 inch )
Weight(excl. packing) 3.0 kg (6.65 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
Without Stand
Width    50.9 cm ( 19.80 inch ) 
Height 30.4 cm ( 11.96 inch )   
Depth 6.2 cm (    2.44 inch )
NOTE
Information in this document is subject to change without notice.
DDC 2B(Digital),DDC 2AB(Analog)
 
						

							27
Specifications                                                                    E2211S
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.6 cm0.248 mm x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 HzResolution
Plug&Play
On Mode:28 W(Typ.)Sleep Mode <        0.3 W
Off Mode <        0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    50.9 cm ( 19.80 inch ) 
Height 39.9 cm ( 15.70 inch )     
Depth 21.0 cm (   8.26 inch )
Weight(excl. packing) 3.0 kg (6.65 lb )Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width    50.9 cm ( 19.80 inch ) 
Height 30.4 cm ( 11.96 inch )   
Depth 6.2 cm (    2.44 inch )
NOTE
Information in this document is subject to change without notice.
 
						

							28
Specifications                                                                    E2411T
60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 60.97 cm0.277 mm x 0.277 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 HzResolution
Plug&Play
On Mode:28 W(Typ.)
Sleep Mode <        0.3 W
Off Mode <        0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    56.9 cm ( 22.40 inch ) 
Height 43.3 cm ( 17.04 inch )     
Depth 21.0 cm (   8.26 inch )
Weight(excl. packing) 3.9 kg ( 8.8 lb )Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 1.2 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
Without Stand
Width    56.9 cm ( 22.40 inch )   
Height 34.2 cm ( 13.46 inch )   
Depth 6.3 cm (   2.48 inch )
NOTE
Information in this document is subject to change without notice.
DDC 2B(Digital),DDC 2AB(Analog)
 
						

							29
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode
E2211T/E2211S/E2411T
1
2
3
4
5
6
7
8
9
10
11
*12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 108031.468
31.469
37.500
37.879
46.875
48.363
60.023
67.500
63.981
79.976
65.290
67.50070
60
75
60
75
60
75
75
60
75
60
60
Polarity(H/V)
-/+
-/-
-/-
+/+
+/+
-/-
+/+
+/+
+/+
+/+
-/+
+/+
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode
E1911T/E1911S
1
2
3
4
5
6
7
*8720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1366 x 76831.468
31.469
37.500
37.879
46.875
49.725
48.363
47.71270
60
75
60
75
75
60
60 *If you cant select 1366 x 768 in display property timing option, please
update your video card driver from your video card vendor.
Polarity(H/V)
-/+
-/-
-/-
+/+
+/+
-/-
-/-
+/+
Indicator
On Mode
Sleep Mode
Off ModeWhite
White Blinking
Off
LED Color
MODE