LG Flatron E2210p Owners Manual

							10
Control Panel Functions
Front Panel Controls
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
 
						

							11
Control Panel Functions
INPUT Button
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. Power Button &
Power Indicator
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.  (SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
MODE ButtonUse this button to enter F-ENGINE, ORIGINAL
RATIO(Only 
E2210PM),PHOTO EFFECT menus.
For more information, refer to page 18.
VOLUME ButtonTo adjust the volume of headphone/speaker.
 
						

							12
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustm\
ent, 
and setting menus.
NORMAL 
MOVIE
INTERNETF-ENGINETo select or customize desired 
image settings
: D-SUB(Analog signal) input  
: DVI-D(Digital signal) inputDSUBDVI-D
DSUBDVI-D
LANGUAGE 
POWER INDICATOR 
WHITE BALANCE
FACTORY RESETTo customize the screen status 
for a users operating
environmentOTHERS
HORIZONTAL 
VERTICAL
CLOCK
PHASE
AUTODISPLAYTo adjust the position of the 
screen  
COLOR TEMP (PRESET / USER)
GAMMACOLORTo customize the color of the 
screen
BRIGHTNESS 
CONTRAST
SHARPNESSPICTURETo adjust the brightness, contrast 
and sharpness of the screen
NOTE  The order of icons may differ depending on the model (13~ 22).
DSUBDVI-D
DSUBDVI-D
DSUB
DSUB
DSUBDVI-D
DSUBDVI-D
DSUB
WIDE 
ORIGINALORIGINAL 
RATIO
(Only
E2210PM)
To adjust the image sizeDSUBDVI-D
Main menu Sub-menu            Supported inputDescription
To improve the clarity and 
stability of the screen 
NORMAL 
GAUSSIAN BLUR
SEPIA
MONOCHROMEPHOTO  
EFFECTTo adjust screen color modeDSUBDVI-D
VOLUMETo adjust the volumeDSUBDVI-D
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST 
SHARPNESSTo adjust the brightness of the screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
PRESET
Select the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• WARM: Set the screen to warm color    
temperature . 
• MEDIUM: Set the screen to medium  
color temperature.
• COOL: Set the screen to cool color
temperature.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.

COLOR TEMP
USER
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select 
sub-menu
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
AUTO This will automatically adjust your
display image to the ideal settings for
the current screen resolution size
(display mode).
The best display mode is
E1910PM : 1280 x 1024
E2210PM : 1680 x 1050
To adjust the volume of headphone/Speaker.
Exit: Exit
: Decrease
: Increase
: Mute
: Restart to select sub-menu
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Move
Select another sub-menu
Press the MODEButton, then the main menu of the OSD appears.
Sub-
menus Icons
E1910PM
E2210PM
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALSelect this when you want to use the product
in the most general using environment. 
MOVIE
Select this when you are watching a video or
movie.
INTERNETSelect this when you are working on the
document (Word etc.)
Exit: Exit
,     : Move: Select another sub-menu
When F-ENGINE is not NORMAL,CONTRAST can not be selected.
E1910PM
E2210PM
E1910PM
E2210PM
E1910PM
E2210PM