LG Flatron E2041t Owners Manual

							10
Control Panel Functions
Front Panel Controls
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  OSD LOCKED should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
OSD UNLOCKED should appear.
E1941T/E2041T/E2241T/E2341T/E2441T
E1941S/E2041S/E2241S
 
						

							11
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
AUTObutton on the MONITOR SETUP OSD.
)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
E1941T/E1941S : 1366 x 768
E2041T/E2041S : 1600 x 900
E2241T/E2241S/E2341T/E2441T : 1920 x 1080
INPUT Button
Use this  button to  turn the  display on  or off.
T he  power  indicator stays  blue if the  display i s running
properly (On  Mode). If the  display is in Sleep Mode,thePower Button &
Power Indicator
When two  input signals  are connected, you  can select the
input signal  (D-SUB/DVI) you  want. When  only one signal
i s connect ed, it is aut omat ically det ected. The  default
se tting  is D-S ub. 
( Only  E1941T/E2041T/E2241T/E2341T/E2441T )
(SOURCE Hot key)
Exit the OSD(On  Screen Display).
EXIT Button 
SUPER ENERGY 
SAVING ButtonUse this button to enter SUPER ENERGY SAVING 
menus.For more information, refer to page 16.
power indicator is blinking blue.
 
						

							2
e
 n.
 s.
 /   /  
   
  .
 n 
1
2
3
4
 
						

							13
On Screen Display(OSD) Selection and Adjustment 
The following table  indicates a ll the On S creen Display contr ol, adjustment,
a nd  sett ing menus.
: D-SUB(A nalog signal)  input 
: DVI -D(Digital  signal) inputDSUBDVI-D
To cust omize the  screen status
for a  users  operating
environment
COLOR TEMP
(PRESET/USER)
CONTRAST
LANGUAGE
MENUTo  adjus t the bright ness of
the s creen
To  adjus t the contrast   of the
 s creen
NOTE 
The order of icons may differ depending on the model (13~18).
DSUBDVI-DBRIGHTNESS
OR IGINAL RATIO
To adjus t the image size
Main menu Sub-menu            Suppo rted inputDescription
To  cust omize the  color of the 
screen
DSUBDVI-D
SUPER
ENERGY
SAVINGT urn on the SUPER ENERGY
SAVING function. 
Initialize the SUPER ENERGY
SAVING and set to OFF mode.  
Turn off the SUPER ENERGY
SAVING function.
FACTORY R ESET
ON
OFF
RESET
 
						

							14
,
 
						

							15
 
						

							17
Turn on the SUPER ENERGY SAV-
ING function.Turn off the SUPER ENERGY SAV-
ING function. Now the monitor is 
LED SAVING function.
Clear the TOTAL POWER REDUC-
TION and TOTAL CO2 REDUCTION 
values.
 
						

							Saving Data depends on the Panel. So, those values should be different from each 
panel and panel vendor.
LG accumulate those values using integrated function with 10 minutes broadcast v-
ideo signal.
LED Saving means that how much power can be saved using WLED Panel instead 
of CCFL panel. 
SUPER Saving means that how much power can be more saved using SUPER E-
NERGY SAVING function. 
1819 inch   20 inch  22 inch   23 inch   24 inchSAVING DATA(W/h) : 
						

							19
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
 Is the power indicator
light on?
 Is the power indicator
flickering?
 Do you see an OUT OF
RANGE message on
the screen?
 Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings, so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the  MENUbutton for several
seconds: the message 
“OSD UNLOCKED” will appear.
Do you see “OSD
LOCKED” when you
push MENU button?