LG Flatron E2040t Users Guide

							10
Control Panel Functions                    E1940T/E2040T/E2240T/E2340T
Front Panel Controls
MODE ButtonUse this button to enter F-ENGINE, ORIGINAL RATIO,
PHOTO EFFECTmenus.
For more information, refer to page 21.
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
 
						

							11
Control Panel Functions
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTObutton before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1940T : 1360 x 768
E2040T : 1600 x 900
E2240T/E2340T : 1920 x1080 
INPUT Button
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. Power Button &
Power Indicator
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.  (SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
 
						

							12
Control Panel Functions                    E1940S/E2040S/E2240S/E2340S
Front Panel Controls
MODE ButtonUse this button to enter F-ENGINE, ORIGINAL RATIO,
PHOTO EFFECTmenus.
For more information, refer to page 21.
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
 
						

							Control Panel Functions
13
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTObutton before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1940S : 1360 x 768
E2040S : 1600 x 900
E2240S/E2340S : 1920 x1080 
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. Power Button &
Power Indicator
Exit the OSD(On Screen Display).EXIT Button 
 
						

							14
On Screen Display (OSD) Control Adjustment   E1940T/E2040T/E2240T/E2340T
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							On Screen Display (OSD) Control Adjustment   E1940S/E2040S/E2240S/E2340S
15
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
F-ENGINE
ORIGINAL 
RATIO
PHOTO 
EFFECTMODETo select or customize desired
image settingsDSUBDVI-D
LANGUAGE
POWER INDICATOR
WHITE BALANCE
FACTORY RESETTo customize the screen status
for a users operating
environmentOTHERS
HORIZONTAL
VERTICAL
CLOCK
PHASEDISPLAYTo adjust the position of the
screen  
COLOR TEMP 
(PRESET / USER)
GAMMACOLORTo customize the color of the
screen
BRIGHTNESS
CONTRAST
SHARPNESSPICTURETo adjust the brightness, contrast
and sharpness of the screen
NOTE 
The order of icons may differ depending on the model (16~24).
DSUBDVI-D
DSUBDVI-D
DSUB
DSUB
DSUBDVI-D
DSUBDVI-D
DSUB
To adjust the image sizeDSUBDVI-D
Main menu Sub-menu            Supported inputDescription
To improve the clarity and
stability of the screen 
To adjust the screen color mode
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) inputDSUBDVI-D
NORMAL
MOVIE
INTERNET
DEMO
WIDE
ORIGINAL
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
DSUBDVI-D
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
E1940T/E2040T/E2240T/E2340TE1940S/E2040S/E2240S/E2340S
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST 
SHARPNESSTo adjust the brightness of the screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
PRESET
Select the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
GAMMA
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
COLOR TEMP
USER
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu