LG Flatron E1941s Owners Manual

							Specifications
Prese t
  
Modes  (Resolution)
Displa y
  
Modes  (Resolution) Horizontal F req. (kHz) Ver Polarity(H/V)
tical F req. (Hz)
*Recommend Mode
Di
 s
play  Modes  (Resolution) Horizontal F req. (kHz)Vertical F req. (Hz)
*Recommend Mode
E1941T/E1941S
E2041T/E2041S
1
2
3
4
5
6
7
8
*9 720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1366 x  768 31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.712
70
-/+
-/+
+/+ -/-
+/+ -/- -/-
+/+
+/+
60                   -/-
75                   -/-
60                  +/+
75                  +/+
75                   -/-
  +/+
60                   -/-
75                  +/+
60                  +/+
1
2
3
4
5
6
7
8
*9 720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864 1600 x 900 31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
60.000
70
60
75
60
75
60
75
75
60
30
*
I
 f you can’t select 1366 x 768 in display property t
iming option, please update 
your video card driver f rom your video card vendor.
Polarity(H/V)
 
						

							Polarity(H/V)
-/+
-/+ -/-
-/-
+/+
+/+
+/+
  +/+
-/-
+/+
+/+
+/+
 
						

							32
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Place the  monitor with 
 its
 front facing  downwardon a soft cloth.
2.Remove the Stand Body  and Stand Base from product in correct direct ion 
as  shown  in the picture.
 
						

							33
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can
be purchased separately at most
computer stores.
Hole spacing : 75 mm x 75 mm.
3.Install the Wall mount plate.
NOTE
VESA compatible only with respect to screw mounting interface dimensions\
 and mounting screw      
specifications
Please use VESA standard as below. * 784.8 mm and under (30.9 inch)  - Wall Mount Pad Thickness :  2.6 mm
- Screw :   4.0 mm x Pitch 0.7 mm x Length 10 mm    
* 787.4 mm and above (31.0 inch)  - Please use VESA standard wall mount pad and screws. 
 
						

							Make  sure  to  read  the  Safet y  Precautions 
before using the product.
Ke e p   t h e   OW N E R ’ S   M A N UA L (C D)   i n   a n 
accessible place for furture reference.
The  model  and  serial  number  of  the  SET  is 
located  on  the  back  or  one  side  of  the  SET. 
Record it below should you ever need service.
MODEL
SERIALAs  an  ENERGY  STAR  Partner  LGE  U.  S. A.,Inc. 
has  determined  that  this  product  meets  the 
ENERGY STAR guidelines for energy efficiency.
E N E R G Y   S TA R   i s   a   s e t   o f   p o w e r - s a v i n g 
guidelines  issued  by  the  U.S.Environmental 
Protection Agency(EPA).