LG Flatron E1940s Owners Manual

							20
On Screen Display(OSD) Selection and Adjustment 
Press the      ,       buttons to reset
immediately.
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
Exit: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
 
						

							21
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MODEButton, then the main menu of the OSD appears.
E1940T/E2040T/E2240T/E2340TE1940S/E2040S/E2240S/E2340S
 
						

							22
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALSelect this when you want to use the product
in the most general using environment. 
MOVIE
Select this when you are watching a video or
movie.
INTERNETSelect this when you are working on the
document (Word etc.)
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the video mode. 
Exit: Exit,    : Move
: Restart to select sub-menu
 
						

							23
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
Change the input image signal ratio to
original. 
WIDE
ORIGINALSwitch to full screen mode according to
input image signal.  
* This function works only if input
resolution is lower than monitor ratio
(16:9).
Exit: Exit,    : Move
: Restart to select sub-menu
 
						

							24
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
NORMALThe PhotoEffect function is disabled.
GAUSSIAN
BLURThis menu changes the screen to be more
colorful and smoother. 
SEPIAThis menu changes the screen to be
Sepia tone (brown color). 
MONOCH
-ROMEThis menu changed the screen to be
Gray tone(black-and-white Picture) .
Exit: Exit,    : Move
: Restart to select sub-menu
 
						

							25
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							26
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 
 
						

							27
Display image is incorrect
Troubleshooting
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							28
Specifications                                                          E1940T
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Composite, DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode:17 W(Typ.)Sleep Mode≤1 W
Off Mode≤0.5 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     46.34 cm  (18.24 inch) 
Height 37.35 cm  (14.70 inch)     
Depth 17.40 cm  (6.85 inch)
Weight(excl. packing) 2.4 kg (5.29 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B(Digital),DDC2AB(Analog)
Without Stand
Width     46.34 cm  (18.24 inch) 
Height 30.20 cm  (11.89 inch)  
Depth 4.3 cm  (1.69 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN ElectronicsAC-DC Adapter
 
						

							29
Specifications                                                          E1940S
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.0cm
0.300 mm x 0.300 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Composite Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode:17 W(Typ.)Sleep Mode≤1 W
Off Mode≤0.5 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width     46.34 cm  (18.24 inch) 
Height 37.35 cm  (14.70 inch)     
Depth 17.40 cm  (6.85 inch)
Weight(excl. packing) 2.4 kg (5.29 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width     46.34 cm  (18.24 inch) 
Height 30.20 cm  (11.89 inch)  
Depth 4.3 cm  (1.69 inch)
NOTE
Information in this document is subject to change without notice.
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN ElectronicsAC-DC Adapter