LG Flatron E1910sm Owners Manual

							30
55.8 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 55.8cm
0.282 x 0.282 mm (Pixel pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 HzResolution
Plug&Play
On Mode:28 W(Typ.)
Sleep Mode≤0.2 W
Off Mode≤0.15 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    50.64 cm ( 19.94 inch) 
Height 42.49 cm ( 16.73 inch)     
Depth 20.99 cm (   8.26 inch)
Weight(excl. packing) 3.5 kg (7.87 lb)Dimensions
& Weight
Tilt : -5˚ to 15˚Range
AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2AB
Without Stand
Width    50.64 cm ( 19.94 inch) 
Height 33.32 cm ( 13.12 inch)   
Depth 6.04 cm (   2.38 inch)
NOTE
Information in this document is subject to change without notice.
Specifications                                                          E2210S
 
						

							31
Indicator
On Mode
Sleep Mode
Off ModeWhite
White Blinking
Off
LED Color
MODE
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode
E2210T/E2210S
1
2
3
4
5
6
7
8
9
10
*11720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 105031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.29070
60
75
60
75
60
75
75
60
75
60
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode
E1910T/E1910S
1
2
3
4
5
6
7
8
*9
10720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 102431.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.97670
60
75
60
75
60
75
75
60
75
 
						

							32
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Place the monitor with its front facing downward on a soft cloth.
2.Separate the stand by pushing the PUSH button.
Warning:
You can hurt your finger.
Good Position Bad Position
 
						

							33
Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can
be purchased separately at most
computer stores.
Hole spacing : 75 mm x 75 mm.
3.Install the Wall mount plate.
NOTE
VESA compatible only with respect to screw mounting interface dimensions and mounting screw     
specifications
Please use VESA standard as below.
* 784.8 mm and under (30.9 inch) 
- Wall Mount Pad Thickness :  2.6 mm
- Screw :   4.0 mm x Pitch 0.7 mm x Length 10 mm    
* 787.4 mm and above (31.0 inch) 
- Please use VESA standard wall mount pad and screws. 
 
						

							Make  sure  to  read  the  Safet y  Precautions 
before using the product.
Ke e p   t h e   OW N E R ’ S   M A N UA L (C D)   i n   a n 
accessible place for furture reference.
The  model  and  serial  number  of  the  SET  is 
located  on  the  back  or  one  side  of  the  SET. 
Record it below should you ever need service.
MODEL
SERIALAs  an  ENERGY  STAR  Partner  LGE  U.  S. A.,Inc. 
has  determined  that  this  product  meets  the 
ENERGY STAR guidelines for energy efficiency.
E N E R G Y   S TA R   i s   a   s e t   o f   p o w e r - s a v i n g 
guidelines  issued  by  the  U.S.Environmental 
Protection Agency(EPA).