LG Flatron D2542p Owners Manual

www.lg.com
OWNER’S MANUAL
CINEMA 3D MONITOR
D2242P
D2342P 
D2542P
Please read this manual carefully before operating 
your set and retain it for future reference.
CINEMA 3D MONITOR MODEL
ENGLISH
 

2
ENGENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLING AND 
PREPARING
3  Unpacking
4 Parts and buttons
6 Setting up the Monitor set 
6  - Attaching the Stand Base
6  - Detaching the Stand Base and Body
7  - Mounting on a table
8  - Mounting on a wall
10 USING THE MONITOR SET
10  Connecting to a PC
10  - D-SUB connection
10  - DVI-D connection
10  - HDMI connection
12 CUSTOMIZING SETTINGS
12  Accessing The Main Menus
13 Customizing Settings
13  - Menu Settings
14  - Things you need to check before...

3
ENGENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
 accessories, contact the local 
dealer where you purchased your product. The illustrations in this manual may differ from the actual product 
and accessories.
 yDo not use any unapproved accessories to ensure the safety and product l\
ife span.
 yAny damages or injuries by using unapproved accessories are not covered \
by the warranty. 
 yThe accessories...

4
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
HDMI
D-SUB
AC
-IN /
E>w_z!LD VI-D
Power Indicator
 yLighting On: Turned on
 yLighting Off: Turned off
Connection panel (See p.10)
Button (See p.12)
(Power Button)
  

5
ENGENGLISH
ASSEMBLING AND PREPARING
ButtonDescription
MENUAccesses the main menus.(See p.13)
OSD LOCKED/UNLOCKEDThis function allows you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
SUPER ENERGYSAVING ButtonUse this button to...

6
ENGENGLISH
ASSEMBLING AND PREPARING
Setting up the Monitor set 
Attaching the Stand Base
1 Place the Monitor set with the screen side 
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth 
on the surface to protect the screen from 
damage.
 yThis illustration depicts the general model of 
connection. Your monitor may differ from the 
items shown in the picture.
 yDo not carry the product upside down holding 
only the stand base. The product may fall 
and get damaged or injure...

7
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the Monitor set into its upright 
position on a table.
Leave a 10 cm (minimum) space from the wall 
for proper ventilation.
2 Connect the Power Cord to a wall outlet.
3 Press (Power) button on the front switch 
panel to turn the power on.
10 cm
10 cm
10 cm
10 cm
When you adjust the angle, do not hold the 
bottom of the Monitor set frame as shown on 
the following illustration, as may injure your 
fingers.
Do not touch or press the...

8
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it...

9
ENGENGLISH
ASSEMBLING AND PREPARING
 yDisconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 yIf you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 yUse only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 y Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 y Use only screws and wall mounts that 
meet the...

10
ENGENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
 yYour Monitor set supports Plug & Play*. 
*Plug & Play:  A PC recognizes a connected 
device that users connect to a PC and turn 
on, without device configuration or user 
intervention.
D-SUB connection
Transmits analog video from your PC to the 
Monitor set. Connect the PC and the Monitor set 
with the supplied D-sub 15 pin signal cable as 
shown in the following illustrations.
 yMac adapter
For Apple Macintosh use, a separate...