LG E2411t Owners Manual
Have a look at the manual LG E2411t Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit: Exit, : Move: Select another sub-menu Turn on the SUPER ENERGY SAVING fuction. When current setting value is ON,the SUPER SAVING color is green. Turn off the SUPER ENERGY SAVING function.Now the monitor is LED SAVING function. When current setting value is OFF,the SUPER SAVING color is gray. Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. OK : Select TOTAL POWER REDUCTION: How much power is saved during using the monitor. TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.ON OFF RESET
21 On Screen Display(OSD) Selection and Adjustment SUPER SAVING LED SAVING 19 inch 3 34 155 17 22 inch 24 inch Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. NOTE SAVING DATA(W/h):
22 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a OSD LOCKED message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an OUT OF RANGE message on the screen? Do you see a CHECK SIGNAL CABLE message on the screen?• Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the Specifications section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENUbutton for several seconds: the message “OSD UNLOCKED”will appear. Do you see “OSD LOCKED” when you push MENU button?
23 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed.• Press the AUTObutton to automatically adjust your display image to the ideal setting. • Press the AUTObutton to automatically adjust your display image to the ideal setting. • Press the AUTObutton to automatically adjust your display image to the ideal setting. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settingsand see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
24 Display image is incorrect Troubleshooting The screen color is mono or abnormal. The screen blinks.• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an Unrecognized monitor, Plug&Play (VESA DDC) monitor found message? Have you installed the display driver?• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. • Make sure to check if the video card supports Plug&Play function.
25 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0cm 0.300 mm x 0.300 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 61 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1366 x 768 @ 60 Hz Recommend VESA 1366 x 768 @ 60 HzResolution Plug&Play On Mode:18 W(Typ.)Sleep Mode < 0.3 W Off Mode < 0.3 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.2 cm ( 17.42 inch ) Height 35.8 cm ( 14.09 inch ) Depth 17.0 cm ( 6.69 inch ) Weight(excl. packing) 2.8 kg ( 6.19 lb )Dimensions & Weight Tilt : -5˚ to 15˚Range AC 100-240 V~ 50 / 60 Hz 0.8 A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC 2AB(Analog) Without Stand Width 44.2 cm ( 17.42 inch ) Height 26.7 cm ( 10.51 inch ) Depth 6.1 cm ( 2.40 inch ) NOTE Information in this document is subject to change without notice. Specifications E1911T
26 Specifications E1911S 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0cm 0.300 mm x 0.300 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 61 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input Max VESA 1366 x 768 @ 60 Hz Recommend VESA 1366 x 768 @ 60 HzResolution Plug&Play On Mode:18 W(Typ.)Sleep Mode < 0.3 W Off Mode < 0.3 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 44.2 cm ( 17.42 inch ) Height 35.8 cm ( 14.09 inch ) Depth 17.0 cm ( 6.69 inch ) Weight(excl. packing) 2.8 kg ( 6.19 lb )Dimensions & Weight Tilt : -5˚ to 15˚Range AC 100-240 V~ 50 / 60 Hz 0.8 A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 44.2 cm ( 17.42 inch ) Height 26.7 cm ( 10.51 inch ) Depth 6.1 cm ( 2.40 inch ) NOTE Information in this document is subject to change without notice.
27 Specifications E2211T 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm0.248 mm x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 HzResolution Plug&Play On Mode:28 W(Typ.)Sleep Mode < 0.3 W Off Mode < 0.3 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 50.9 cm ( 19.80 inch ) Height 39.9 cm ( 15.70 inch ) Depth 21.0 cm ( 8.26 inch ) Weight(excl. packing) 3.0 kg (6.65 lb)Dimensions & Weight Tilt : -5˚ to 15˚Range AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord Without Stand Width 50.9 cm ( 19.80 inch ) Height 30.4 cm ( 11.96 inch ) Depth 6.2 cm ( 2.44 inch ) NOTE Information in this document is subject to change without notice. DDC 2B(Digital),DDC 2AB(Analog)
28 Specifications E2211S 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm0.248 mm x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input Max VESA 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 HzResolution Plug&Play On Mode:28 W(Typ.)Sleep Mode < 0.3 W Off Mode < 0.3 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 50.9 cm ( 19.80 inch ) Height 39.9 cm ( 15.70 inch ) Depth 21.0 cm ( 8.26 inch ) Weight(excl. packing) 3.0 kg (6.65 lb )Dimensions & Weight Tilt : -5˚ to 15˚Range AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2AB Without Stand Width 50.9 cm ( 19.80 inch ) Height 30.4 cm ( 11.96 inch ) Depth 6.2 cm ( 2.44 inch ) NOTE Information in this document is subject to change without notice.
29 Specifications E2411T 60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 60.97 cm0.277 mm x 0.277 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. DigitalSync Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input Max VESA 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 HzResolution Plug&Play On Mode:28 W(Typ.) Sleep Mode < 0.3 W Off Mode < 0.3 WPower Consumption Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-CondensingEnvironment al Conditions With Stand Width 56.9 cm ( 22.40 inch ) Height 43.3 cm ( 17.04 inch ) Depth 21.0 cm ( 8.26 inch ) Weight(excl. packing) 3.9 kg ( 8.8 lb )Dimensions & Weight Tilt : -5˚ to 15˚Range AC 100-240 V~ 50 / 60 Hz 1.2 A Power Input Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord Without Stand Width 56.9 cm ( 22.40 inch ) Height 34.2 cm ( 13.46 inch ) Depth 6.3 cm ( 2.48 inch ) NOTE Information in this document is subject to change without notice. DDC 2B(Digital),DDC 2AB(Analog)