LG Dx540 User Manual

Function
21
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the  
D, Ebutton to selectWhite peakingitem.
3. Press the 
F, Gbutton to adjust the screen condition as you want.
The default value may change depending on input mode.White peakingcan be adjusted from 0 to 10.Adjust to higher setting to achieve brighter picture. Adjust to lower setting for
darker picture.
To exit the menu display, repeatedly press the MENUbutton.
White peaking Function
1. Press the...

Function
22
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the  
D, Ebutton to selectExpert Coloritem.
3. Press the 
AOKbutton.
4. When the window below appears, press 
D, Ebutton to move between the
items and the 
F, G buttons to adjust the screen as you want.
Red, Green, Blue, Cyan, Magenta andYellow Gaincan be adjusted
between 0 and 100.
Saturation-Red, Green, Blue, Cyan, Magenta andYellowcan be 
adjusted between 0 and 100.
Hue-Red, Green, Blue, Cyan, Magenta...

Function
23
Special Menu Options
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the  
D, Ebutton to selectLanguageitem.
3. Press the 
F, Gbutton to select the language you want to use.
On-Screen-Display (OSD) is displayed in the selected language.To exit the menu display, repeatedly press the MENUbutton.
Selecting Language
1. Press the ARCbutton.
Each press of the button changes the display as below.
Using ARC  Function
You can also use this function by using the...

Function
24
Flip horizontal Function
* This function reverses the projected image horizontally.
Use this function when rear projecting an image.
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the 
D, Ebutton to selectFlip horizontalitem.
3. Press the 
AOKbutton to see reversed image.
Each time you press the AOKbutton, the image will be reversed.To exit the menu display, repeatedly press the MENUbutton.
Flip vertical Function
* This function reverses the projected...

Function
25
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the 
D, Ebutton to selectAuto sleepitem.
3. Press the 
F, Gbutton to select the desired preset time.
To exit the menu display, repeatedly, press the MENUbutton.
Auto sleep Function
Presentation timer Function
* This function turns the projector off automatically after the preset time is passed
when there is no signal.
Language
ARC
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID...

Function
26
Special Menu Options
1. Press the KEYSTONE +or KEYSTONE -button.
2. Press the KEYSTONE +or KEYSTONE -button to adjust the screen 
condition as you want.
Keystonecan be adjusted from -20 to 20.You can also access this function via the MENUbutton.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystonefunction when you can’t get the best angle of projection.
1. Press the BLANKbutton.The...

Function
27
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the  
D, Ebutton to selectLamp modeitem.
3. Press the 
F, Gbutton to select High Bright or Economic.
To exit the menu display, repeatedly press the MENUbutton.
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. The used lamp time is displayed.
When projector lamp is reaching the end of its life, the lamp indicator will turn
red.
The lamp warning LED illuminates red continuously...

Function
28
1. Press the AUTO button of the remote controller.Image positioning and synchronization are automatically adjusted.
2. If any more manual adjustment is needed according to the various PC
mode inputs even after the auto-correction, execute 
Phase, Clock,
Horizontal 
andVertical function in       menu. In certain circumstances,
you can’t get the best picture quality by only using auto-correction.
Auto configure Function
* This function assures you of getting the best video quality by...

Function
29
1. Press the MENUbutton and then use F, Gbutton to select
the         menu.
2. Press the 
D, Ebutton to select Horizontalitem.
3. Press the  
F, G button to make desired adjustments.
Horizontaladjustment range is -25 ~ 25.The variable range can be different depends on input resolutions. To exit the menu display, repeatedly press the MENUbutton.
1. Press the MENUbutton and then use F, Gbutton to select
the         menu.
2. Press the  
D, Ebutton to select Verticalitem.
3. Press the  
F, G...

RS-232C
30
External Control Device Setup
SET ID
How to connect external control equipment
* Connect the RS-232C input jack to an external control device (such as a computer) and control the Projector’s
functions externally.
1. Press the MENUbutton and then use F, Gbutton to select the         menu.
2. Press the 
AOKbutton and then use D, Ebutton to selectSet IDitem.
3. Press the 
F, Gbutton to select your desired number.
Press the 
AOKbutton to save the selected number.
The adjustment range ofSet IDis...