LG Dv4s2h-n Manual

DV4S2H-N
ENGLISH
P/No. : MFL58825920
As an E
NERGY
STA R
®Partner,
LG has determined that this
product or product models meet
the E
NERGY
STA R
®guidelines for
energy efficiency.
ENERGY
STA R
®is a U.S. registered mark.
http://www.lg.ca
DV4S2H-N.BCANLLK_5920_ENG  10/20/08  3:55 PM  Page 1 

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is intended to alert...

3
Important Safety Instructions1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 
9. Do not defeat the safety purpose of the polarized...

4
About the  Symbol Display“  ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that disc.Regional CodesThis unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
•Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play. 
•If you try...

5
Hooking up the unit Audio and Video ConnectionThe unit Audio/Video jacks are color coded (yellow for video, red for right audio
and white for left audio). If your TV has only one input for audio (mono), 
connect it to the left (white) audio jack on the unit. 
Hooking up the unit - more you can do
Component Video ConnectionsConnect the COMPONENT/PROGRESSIVE SCAN OUT jacks on the unit to
the corresponding input jacks on your TV using a YP
BPRcable.
•You will still need to connect the left and right audio...

6HDMI Connection
Connect the HDMI OUT jack on the unit to the HDMI input jack on an HDMI
compatible TV using an HDMI cable.Resolution SettingYou can change the resolution for HDMI output. Press RESOLUTION 
repeatedly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.
The resolution may not be selected depending on the connection or TV.Note for 1080p resolutionThe unit is able to provide a 1080p full HD image to most 1080p-capable TVs in
the market today. However, there are some 1080p TVs...

7
How to attach the Cable Cover If you want to, install it as shown below.Using the round shaped supportTo set up this unit on the table or other level space, rotate the round shaped 
support on the back of the unit to the arrow direction as show below.
Wall MountingIf you want to, you can mount the unit on a wall.
You need to have hooks available that snugly fit into the hanging holes in the
back of the unit. Screw your hooks into the wall.
Ensure that the unit locks onto the hooks and that the hooks...

8Remote control

 
 
 


 
 


 
 


 
 


 
 


 
 


 
 
a



 
 


 
 


 
 


 
 


 
 


 
 



POWER (1) : Switches the unit ON or OFF.OPEN/CLOSE (Z) : Opens and closes the disc tray.AUDIO ( ): Selects an audio language or audio
channel.
SUBTITLE ( ): Selects a subtitle language.
ANGLE ( ) : Selects a DVD camera angle, if
available.
SETUP: Accesses or exits the setup menu.


 
 


 
 


 
 


 
 


 
 


 
 


 
 
b



 
 


 
 


 
 


 
 


 
 


 
 



SCAN (m/ M) : Search backward or forward....

9
Main Unita1/I (Power)
Turn  the unit ON or OFF.
b Disc Tray
Insert a disc here.
c Remote sensor
Point the remote control here.
d Z(Open / Close)
Opens or closes the disc tray.
e N (Play)
Starts playback. f
x (Stop)
Stops playback.
g .  (Skip)
Returns to the beginning of current chapter,
track or file go to the previous chapter, track or
file.
h >  (Skip)
Go to next chapter, track or File. 
i Display window
Shows the current status of the unit.
j USB Port
Connect an USB Flash Drive.
USB
abcdefghij...

10Adjust the settings - more you can doWhen you turn on for the first time (optional)The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV b B to select a
language then press ENTER and the confirm menu will appear. Use bB to
select [Enter] then press ENTER.Adjust the language settings  Menu Language – Select a language for the Setup menu and on-screen 
display. 
Disc Audio/Subtitle/Menu – Select a language for the...