LG Dh7620t Owners Manual

							Getting Started11
Getting Started1
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert one (size AAA) battery with 4 and 5 matched correctly.
•  •  •  •  •  •  a •  •  •  •  • 
P RADIO&INPUT: Changes input sources.
MARKER: Marks play list.
1 POWER: Switches the unit ON or OFF.
B OPEN/CLOSE: Ejects or inserts the disc from slot loader.
SLEEP: Sets the System to turn off automatically at a specified time. (Dimmer : The display window will be darken by half.)
m INFO/DISPLAY: Accesses On-Screen Display.
n HOME: Displays the [Home Menu].
DISC MENU: Accesses the menu on a DVD disc.
•  •  •  •  •  •  b •  •  •  •  • 
W/S/A/D (up/ down/ left/ right): Used to navigate on-screen displays.
PRESET +/-: Selects programme of Radio.
TUNING +/-: Tunes in the desired radio station.
b ENTER: Acknowledges menu selection. Presetting the radio stations.
x RETURN: Moves backwards in the menu or exits the setup menu.
TITLE: If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear.
•  •  •  •  •  •  c •  •  •  •  • 
Z STOP: Stops playback.
d PLAY, MONO/STEREO: Starts playback. Selects Mono/ Stereo.
M PAUSE/STEP: Pauses playback.
C/V SKIP: Goes to the next or previous chapter / track / file. 
c/v SCAN: Searches backward or forward.
•  •  •  •  •  •  d •  •  •  •  • 
SPEAKER LEVEL: Sets the sound level of desired speaker.
SOUND EFFECT: Selects a sound effect mode.
VOL -/+ (Volume): Adjusts speaker volume.
OPTICAL: Changes input source to optical directly.
 MUTE: Mutes the sound.
•  •  •  •  •  •  e •  •  •  •  • 
0-9 numerical buttons: Selects numbered options in a menu.
h REPEAT: Selects a play mode. (Repeat/ Random)
CLEAR: Removes a number when setting the password.
•  •  •  •  •  •  f •  •  •  •  • 
TV Control buttons: Controls the TV. (LG TV only)
 -You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER ( TV ) and press PR/CH (W/S) button repeatedly until the TV turns on or off.
X REC: USB Direct Recording.
?: This button is not available.
RDS : Radio Data System.
PTY : Views the various displays of the RDS.
Remote control
DH7620T-R0.BGBRLLK_ENG_6162.indd   112012-03-19    2:08:36 
						

							Getting Started12
Getting Started1
Front panel
12
345678910
a Disc Slot
b  Display windowShows the current status of the unit.
c PORT. INConnects to a portable player with audio outputs.
d  USB PortConnects a USB device.
e R (OPEN/CLOSE)Ejects or insert the disc from slot loader. 
f T (PLAY/PAUSE)Starts playback. Pauses playback temporarily, press again to exit pause mode.
g I (STOP)Stops playback.
h  F (FUNCTION)Changes the input source or function.
i  VOL(-/ +)Adjusts speaker volume. 
j 1 (POWER)Switches the unit ON or OFF.
DH7620T-R0.BGBRLLK_ENG_6162.indd   122012-03-19    2:08:36 
						

							Getting Started13
Getting Started1
a Power cord
b  Speakers connectorsConnects the speaker cables.
c Cooling Fan
d  Antenna ConnectorFM- Connects the FM wired antenna.
e iPod (24 pin) 
f  VIDEO OUTConnects to a TV with video inputs.  
g COMPONENT VIDEO (Y PB PR)OUTPUT (PROGRESSIVE SCAN) Connects to a TV with Y PB PR inputs. 
h HDMI OUTConnects to TV with HDMI inputs. (Interface for digital audio and video) 
i  OPTICAL INConnects to optical audio equipment.
j  AUX (L/R) INPUTConnects to an external source with 2 channel audio outputs.
Rear panel
34567
89
12
DH7620T-R0.BGBRLLK_ENG_6162.indd   132012-03-19    2:08:36 
						

							2 Connecting
Connecting14
Connecting2
Assembling the 
speaker
Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers.
Preparation
Cable
Pole
Base
Speaker
Screw
1.  Attach the pole to the base, then secure the connection with a supplied screw.
(Small screw)
2. Secure the connection with a supplied screw, then insert a speaker wire from the bottom of the base.
(Big screw)
3. Attach the speakers to the speaker stands by rotating the screws.
(Small screw)
DH7620T-R0.BGBRLLK_ENG_6162.indd   142012-03-19    2:08:36 
						

							Connecting15
Connecting2
4. Connect the speaker wire to the terminal on the speaker.
 Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other  wire goes in to the terminal marked  “+” (plus).
Be careful that the speaker  
does not fall down.  
Otherwise it may result in  
the speaker malfunctioning  
and causing personal injury  
and/ or property damage. 
>Caution
DH7620T-R0.BGBRLLK_ENG_6162.indd   152012-03-19    2:08:36 
						

							16
Connecting2
Connecting
Attaching the speakers 
to the unit
1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Connect the black stripe of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus). 
2. Connect the wires to the speakers. Connect the other end of each wire to the correct speaker according to the color coding:
ColorSpeakerPosition
GreyRearRear right
BlueRearRear left
GreenCenterCenter
OrangeSub wooferAny front position
RedFrontFront right
WhiteFrontFront left
To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad.
 
y Be careful to make sure children do not put 
their hands or any objects into the *speaker 
duct. 
*Speaker duct : A hole for plentiful bass 
sound on speaker cabinet (enclosure).
 
y The speakers contain magnet parts, so color 
irregularity may occur on the TV screen or 
PC monitor screen. Please use the speakers 
far away from either TV screen or PC 
monitor. 
>Caution
DH7620T-R0.BGBRLLK_ENG_6162.indd   162012-03-19    2:08:36 
						

							Connecting17
Connecting2
Positioning the system
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening
position ().
AB
D
D
E
E
F
F
AAA
A
A
G
G
C
C
ABA
  Front left speaker (L)/  Front right speaker (R):Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.
  Center speaker: Place the center speaker above or below the monitor or screen.
  Surround left speaker (L)/  Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards.
  Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections. 
 Unit
DH7620T-R0.BGBRLLK_ENG_6162.indd   172012-03-19    2:08:37 
						

							Connecting18
Connecting2
Connections to Your 
TV
Make one of the following connections, depending on the capabilities of your existing equipment.
 
y Depending on your TV and other 
equipment you wish to connect, there are 
various ways you could connect the player. 
Use only one of the connections described 
in this manual.
 
y Please refer to the manuals of your TV, 
Stereo System or other devices as necessary 
to make the best connections. 
,Note
 
y Make sure the unit is connected directly 
to the TV. Tune the TV to the correct video 
input channel.
 
y Do not connect your player via your VCR. 
The image could be distorted by the copy 
protection system. 
>Caution
Component Video Connection
Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. 
You can hear the sound through the system’s speakers.
Unit
TV GreenBlueRed
DH7620T-R0.BGBRLLK_ENG_6162.indd   182012-03-19    2:08:38 
						

							Connecting19
Connecting2
HDMI Out Connection
If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable ( Type A, High Speed HDMI™ Cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor.  Set the TV’s source to HDMI (refer to TV’s Owner’s manual). 
UnitTV
 
y You can fully enjoy digital audio and video 
signals together with this HDMI connection.
 
y When you use HDMI connection, you can 
change the resolution for the HDMI output. 
(Refer to “Resolution Setting” on page 21.) 
,Tip
 
y If a connected HDMI device does not accept 
the audio output of the unit, the HDMI 
device’s audio sound may be distorted or 
may not output.
 
y When you connect a HDMI or DVI 
compatible device make sure of the 
following:
  -   Try switching off the HDMI/DVI device 
and this unit. Next, switch on the HDMI/
DVI device and leave it for around 30 
seconds, then switch on this unit.
  -   The connected device’s video input is set 
correctly for this unit.
  -  
The connected device is compatible with 
720 x 480i (or 576i), 720 x 480p (or 576p),   
1 280 x 720p, 1920 x 1080i or 1920 x 1080p 
video input.
 
y Not all HDCP-compatible HDMI or DVI 
devices will work with this unit.
  -   The picture will not be displayed properly 
with non-HDCP device.
  -  
This unit does not playback and TV screen 
is changed to black or green screen or the 
snow noise may occur on the screen.
 
y If there is noise or lines on the screen, please 
check the HDMI cable and use a higher 
version cable than High Speed HDMI™ 
Cable.  
,Note
 
y Changing the resolution when the 
connection has already been established 
may result in malfunctions. To solve the 
problem, turn off the unit and then turn it 
on again.
 
y When the HDMI connection with HDCP is 
not verified, TV screen is changed to black 
or green screen or the snow noise may 
occur on the screen. In this case, check the 
the HDMI connection, or disconnect the 
HDMI cable. 
>Caution
DH7620T-R0.BGBRLLK_ENG_6162.indd   192012-03-19    2:08:38 
						

							Connecting20
Connecting2
Video Connection
Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable.
You can hear the sound through the system’s speakers.
UnitTV Yellow
To connect to a TV with the 
SCART jack
Connect the RCA to SCART cable form the VIDEO OUT on the rear of the unit to the SCART jack on your TV.
Unit
TV
DH7620T-R0.BGBRLLK_ENG_6162.indd   202012-03-19    2:08:38