LG Dh3120s Owners Manual

Getting Started11
Getting St\frted1
Remote \bontro\f
1
3
4
2
5
Battery Insta\f\fation
Remove	the	battery	cover	on	the	rear	of	the	Remote	Control,	and	insert	one	(size	AAA)	battery	with	4	and	\f	matched	correctly.
•  •  •  •  •  •  \aa •  •  •  •  • 
FUNCTION :	Selects	the	function	and	input	source.	
SLEEP :	Sets	the	system	to	turn	off	automatically	at	a	specified	time.	(Dimmer	:	The	display	window	will	be	darken	by	half.)
POWER :	Switches	the	unit	ON	or	OFF.
OPEN/CLOSE :	Opens	and	closes	the	disc...

2	 Connecting
Conne\bting12
Connecting2
Conne\bting the 
speakers
Atta\bhing the speakers to the 
unit
To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad 	to 	open 	the 	connection 	terminals 	on 	the	unit.	Insert	the	wire	and	release	the	finger	pad.
Connect	the	black	stripe	of	each	wire	to	the	terminals	marked	-	(minus)	and	the	other	end	to	the	terminals	marked	+	(plus).
Speaker connection
	
y Be	careful	to	make	sure	children	not	to	put	
their
	hands 	or 	any 	objects 	into 	the 	*speaker...

Conne\bting13
Connecting2
Conne\btions to Your 
TV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	
y Depending	on	your	
TV	and	other	
equipment	you	wish	to	connect,	there	are	
various	ways	you	could	connect	the	player.	
Use	only	one	of	the	connections	described	
in	this	manual.
	
y Please	refer	to	the	manuals	of	your	
TV,	
Stereo 	System 	or 	other 	devices 	as 	necessary	
to	make	the	best	connections. 
,Note
	
y Make	sure	the	unit	is	connected	directly...

Conne\bting1\b
Connecting2
Video Conne\btion
Connect	the	MONITOR	jack	on	the	unit	to	the	video	in	jack	on	the	TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
SCART Conne\btion
Connect	the 	SCART 	jack 	on 	the 	unit 	to 	the 	SCART 	in	jack	on	the	 TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
Optiona\f Equipment 
Conne\btion
AUX IN Conne\btion
Connect	an	Output	of	auxiliary	device	to	the	AUX	(\b/R)	INPUT	Connector.
If	your	TV	has	only	one...

Conne\bting15
Connecting2
USB Conne\btion
Connect	the	USB	port	of	USB	Memory	(or	MP3	player,	etc.)	to	the	USB	port	on	the	front	of	the	unit.
Removing \fhe USB Device from \fhe uni\f
1.	 Choose	a	different	function	mode	or	press	STOP	(Z)	twice	in	a	row.
2.		 Remove	the	USB	device	from	the	unit.
Antenna Conne\btion
Connect	the	supplied	FM	antenna	for	listening	to	the	radio.
Connect	the	FM	Wire	antenna	to	the	FM	antenna	connector.
Be	sure	to	fully	extend	the	FM	wire	antenna.	
After	connecting	the	FM	wire...

3	 System	Setting
System Setting16
System Setting3
Adjust the Setup 
settings
By	using	the	Setup	menu,	you	can	make	various	adjustments	to	items	such	as	picture	and	sound.
You	can	also	set	a	language	for	the	subtitles	and	the	Setup 	menu, 	among 	other 	things. 	For 	details 	on	each	Setup	menu	item,	see	pages	16	to	19.
OSD Initia\f \fanguage\b settings 
- Optiona\f
During	the	first	use	of	this	unit,	the	initial	language	setup	menu	appears	on	your	 TV	screen.	You	must	complete	initial	language	selection...

System Setting17
System Setting3
[Original]
Refers	to	the	original	language	in	which	the	disc	was	recorded.
[O\fher]
To	select	another	language,	press	numeric	buttons	and	then	ENTER	to	enter	the	corresponding	4-digit	number	according	to	the	language	code	list	on	the	page	30.	If	you	enter	the	wrong	language	code,	press	CLEAR.
[Off (for Disc Sub\fi\fle)]
Turn	off	Subtitle.
DISPLAY
TV Aspe\bt
Select	which	screen	aspect	to	use	based	on	the	shape	of	your	TV	screen.	
[4:3]
Select	when	a	standard	4:3	 TV	is...

System Setting18
System Setting3
AUDIO
DRC (Dynami\b Range Contro\f) 
Make	the	sound	clear	when	the	volume	is	turned	down	(Dolby	Digital	only).	Set	to	[On]	for	this	effect.
Vo\ba\f
Select	[On]	to	mix	karaoke	channels	into	normal	stereo.
This	function	is	effective	for	multi-channel	karaoke	DVDs	only.
5.1 Speaker Setup
Make	the	following	settings	for	the	built-in	5.1	channel	surrounds	decoder.
1.	 Press	SETUP.
2.	 Use	WS	to	select	AUDIO	menu	and	then	press	\b.
3.	 Use WS	to	select	[5.1	Speaker	setup]	menu...

System Setting19
System Setting3
Rating
Blocks	playback	of	rated	DVDs	based	on	their	contents.	Not	all	discs	are	rated.
1.	 Select	[Rating]	on	the	[\bock]	menu	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
3.	 Select	a	rating	from	1	to	8	using	the	WS buttons.
[Ra\fing 1-8]
Rating	one	(1)	has	the	most	restrictions	and	rating	eight	(8)	is	the	least	restrictive.
[Unlock]
If	you	select	unlock,	parental	control	is	not	active	and	the	disc	plays	in	full.
4.	 Press	ENTER	to	confirm	your	rating	selection....

4	 Operating
Operating20
Oper\fting4
Basi\b Operations
1.	 Insert	the	disc	by	pressing	OPEN/CLOSE	or	connect	the	USB	device	to	the	USB	port.
2.	 Select	the	DVD/	CD	or	USB	function	by	pressing	FUNCTION.
3.	 Select	a	file	(or	track/	title)	you	want	to	play	by	pressing	WSA\b.
When	playing	a	disc	or	USB	Flash	Drive	
containing	with	DivX,	MP3/	WMA	and	JPEG	
files	together,	you	can	select	menu	of	files	
which	you	would	like	to	play	by	pressing	
MENU.	If		 “ This	file	has	non-supported	type	
on	the	unit” 	pops...