LG Dh 4220s Owners Manual

							System Setting21
System Setting3
DRC (Dynamic Range Control) 
Make the sound clear when the volume is turned 
down (Dolby Digital only). Set to [On] for this effect.
Vocal
Select [On] to mix karaoke channels into normal 
stereo.
This function is effective for multi-channel karaoke 
DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay between  
picture and sound. If this happens you can 
compensate by setting a delay on the sound so 
that it effectively ‘waits’ for the picture to arrive: 
this is called HD AV Sync. Use 
WS (on the remote 
control) to scroll up and down through the delay 
amount, which you can set at anything between 0 
and 300m sec.
Semi Karaoke 
When a chapter/ title/ track is fully finished, this 
function shows the score in the screen with a 
fanfare sound.
[On]
When you finished singing a score will appear 
on the screen.
[Off ]
Fanfare and score do not appears on the 
screen.
 
y   DVD, DVD Karaoke discs with more than 
2 tracks are available discs for the this 
function.
 
y  When you watch movies, select “Off ” of 
Semi Karaoke at the SETUP menu or enjoy 
it without connecting microphone if the 
fanfare or score appears during changing a 
chapter.
 
y   This function operate on the DVD/CD mode.
 
y  
The Semi Karaoke function is available only 
when a microphone is connected. 
 
,Note
Lock (Parental Control)
Initial Setting the Area Code:
When you use this unit for the first time, you have 
to set the Area Code.
1.  Select the [Lock] menu and then press 
D.
2. Press  D. 
To access the [Lock] options, you must input the 
password you have created. Input a password 
and press  b ENTER. Enter it again and press  
b  
ENTER to verify. If you make a mistake before 
pressing  b ENTER, press CLEAR.
3.  Select the first character using 
WS buttons.
4.  Press 
b 
ENTER and select the second character 
using  WS buttons.
5. Press  b ENTER to confirm your Area code 
selection.
Rating
Blocks playback of rated DVDs based on their 
contents. Not all discs are rated.
1.  Select [Rating] on the [Lock] menu then press 
D.
2.  Input a password and press 
b ENTER.
3.  Select a rating from 1 to 8 using the 
WS 
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and 
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not 
active and the disc plays in full.
4.  Press 
b 
ENTER to confirm your rating selection.
 
						

							4 Operating
System Setting
22
System Setting3
Password
You can enter or change password.
1.  Select [Password] on the [Lock] menu and then 
press 
D.
2. Press  b ENTER.
3.  Input a password and press 
b ENTER.
  To change the password, press 
b ENTER when 
the [Change] option is highlighted. Input a 
password and press  b ENTER. Enter it again 
and press  b ENTER to verify.
4. Press  n HOME to exit the menu.
If you forget your password, you can clear it 
using the following steps:
1.  Select the [Setup] menu on the [Home 
Menu].
2.  Input the 6-digit number “210499” and 
press 
b ENTER. The password is cleared.
 
,Note
Area Code
Enter the code of the area whose standards were 
used to rate the DVD video disc, based on the list 
on page 35.
1.  Select [Area Code] on the [Lock] menu then 
press 
D.
2.  Input a password and press 
b ENTER.
3.  Select the first character using 
WS buttons.
4.  Press 
b 
ENTER and select the second character 
using  WS buttons.
5. Press  b ENTER to confirm your Area code 
selection.
Others
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video 
format created by DivX, LLC, a subsidiary of Rovi 
Corporation. This is an official DivX Certified® device 
that plays DivX video. Visit divx.com for more 
information and software tools to convert your files 
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX 
Certified® device must be registered in order to play 
purchased DivX Video-on-Demand ( VOD) movies. 
To obtain your registration code, locate the DivX 
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete 
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the 
deactivation code.
All the downloaded videos from DivX VOD can 
only be played back on this unit.
 
,Note
 
						

							4 Operating
Operating23
Operating4
Using the Home Menu
1. Press 
n HOME. 
Displays the [Home Menu].
2.  Select an option by using 
AD. 
3. Press  b ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] –   Start video media’s playback or displays 
the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
You can not select the [Music], [Movie] or 
[Photo] option when the USB device is not 
connected or a disc is not inserted.
 
,Note
Basic Operations
1.  Insert the disc by using the 
B OPEN/CLOSE or 
Connect the USB device to the USB port.
2. Press  n HOME. 
Displays the [Home Menu].
3. 
Select an option by using  AD. 
If you select the [Movie], [Photo] or [Music] 
option when you connect up to two devices, 
it appears as belows. Select a media then press
 
b  ENTER. 
4. Press 
b ENTER then selected option menu.
 
y For the most Audio CD and DVD-ROM discs, 
playback starts automatically.
 
y The unit plays only music file contained in 
the USB storage device or disc automatically.
 
,Note
To Do this
Stop  Press 
Z STOP.
Playback Press 
d PLAY, MONO/
STEREO.
Pause Press 
M PAUSE/STEP.
Frame-by-
Frame playback Press 
M PAUSE/STEP 
repeatedly to play title Frame-
by-Frame. (DVD, DivX only)
Skipping to the  next/ previous 
chapter/ track/  file During playback, press 
C/ 
V  SKIP to go to the next 
chapter/ track/ file or to 
return to the beginning of the 
current chapter/ track/ file.
Press  C  SKIP twice briefly 
to step back to the previous 
chapter/ track/ file.
Locating a 
point quickly by  playing a file in fast forward or  fast reverse During playback, press 
c/
v  SCAN repeatedly to 
select the required scan speed.
To return to normal speed, 
press  d PLAY, MONO/
STEREO.
Playing 
repeatedly or  randomly Press 
h REPEAT repeatedly, 
and the current title, chapter 
or track will be played back 
repeatedly or randomly. 
- DVD : Chapter/ Title/ Off
- DivX : Title/ All/ Off
-    Audio CD/ MP3/ WMA : Track/ 
All/ Random/ Off
Slowing down  the playing  speed In the pause mode, press 
SLOW (
c or 
v ) to select 
the required speed. (DVD, DivX 
only) The DivX file cannot be 
slow down reverse playback.
 
						

							Operating
24
Operating4
Other Operations
Displaying Disc Information 
on-screen
You can display various information about the disc 
loaded on-screen.
1. Press 
m INFO/DISPLAY to show various 
playback information. 
The displayed items differ depending on the 
disc type or playing status.
2.  You can select an item by pressing 
WS and 
change or select the setting by pressing  AD.
Title –   Current title number/ total number of titles.
Chapter –   Current chapter number/ total number 
of chapters.
Time – Elapsed playing time.
Audio –   Selected audio language or channel.
Subtitle – Selected subtitle.
Angle –   Selected angle/ total number of angles.
If any button is not pressed for a few seconds, 
the on-screen display disappears.
 
,Note
To display the DVD Menu
r
When you play a DVD which contains several menu, 
you can select the menu you want using the Menu.
1. Press  DISC MENU. 
The disc’s menu appears.
2.  Select the menu by using 
WSAD.
3. Press  d PLAY, MONO/STEREO to confirm.
To display the DVD title
r
When you play a DVD which contains several title, 
you can select the title you want using the Menu.
1. Press 
TITLE. 
The disc’s title appears.
2.  Select the menu by pressing 
WSAD.
3. Press  d PLAY, MONO/STEREO to confirm.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and 
listen to the sound quicker than playing at a normal 
speed.
1. 
During playback, press 
d PLAY, MONO/
STEREO to play at 1.5 times speed. “ dX1.5” 
appears on the screen.
2. Press  d PLAY, MONO/STEREO again to exit.
Screen Saver
The screen saver appears when you leave the unit 
in Stop mode for about five minutes.
 
						

							Operating25
Operating4
Starting play from selected 
time
ry
To start playing at any chosen time on the file or 
title.
1. Press 
m INFO/DISPLAY during playback.
2. Press  WS to select the time clock icon and 
“--:--:--” appears.
3.  Input the required start time in hours, minutes, 
and seconds from left to right. If you enter the 
wrong numbers, press CLEAR to remove the 
numbers you entered. Then input the correct 
numbers. 
For example, to find a scene at 1 hour, 10 
minutes, and 20 seconds, enter “11020” by using 
numerical buttons.
4. Press  b ENTER to confirm. Playback starts from 
the selected time.
Resume playback
ryut
The unit records the point where you pressed the 
Z  STOP depending on the disc.  
If “ MZ  (Resume Stop)” appears on the screen briefly, 
press  d PLAY, MONO/STEREO to resume playback 
(from the scene point). 
If you press  Z STOP twice or unload the disc, 
“ Z ”(Complete Stop) appears on the screen. The 
unit will clear the stopped point. 
The resume point may be cleared when a 
button is pressed (for example;  1 (POWER), 
R  (Open/Close) , etc).
 
,Note
Changing subtitle code page
y
If the subtitle is not displayed properly, you can 
change the subtitle code page to view the subtitle 
file properly.
1.  During playback, press 
m INFO/DISPLAY to 
display the On-Screen display.
2. Use  WS to select the [Code Page] option.
3. Use  AD to select desired code option.
4. Press  x BACK to exit the On-Screen display.
 
						

							Operating
26
Operating4
Marked Playback
ut
The mark function enables you to store your 
favourite files from any disc or USB device in the 
unit memory.
1.  Select [Music] on the [Home Menu].
Returning to the upper folder. 
(MP3/ WMA only)
Moving to the previous or next file list.
Selecting all tracks/ files.
Deselecting all tracks/files.
File information will be displayed 
according to the ID3TAG information 
on the appropriate music file. (MP3 
only)
2. 
Select a desired music on the [List] by using the WS then press MARKER to display the mark on 
the list.
3. Press 
b ENTER or d PLAY, MONO/STEREO. 
Displays the play mode.
4.  Select the play mode by using the 
WS and press b ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
If you want to select all files on the list, select 
[Select All] and press  b ENTER.
 
,Note To delete a Marker
1. Use WS to select the track that you wish to erase 
from the marked file.
2. Press  MARKER.
To delete all Markers
Use 
WSAD  to select [Deselect All] then press 
b  ENTER in program edit mode.
The markers are also cleared when the disc or 
USB device is removed, the unit is switched to 
power off or the function is switched to others.
 
,Note
 
						

							Operating27
Operating4
Viewing a PHOTO file
i
This unit can play discs with photo files.
1. Select [Photo] on the [Home Menu] and press 
b ENTER.
Moving to the previous or 
next file list.
Returning to the upper 
folder. 
2. Press  WS to select a folder, and then press  
b  ENTER. 
3.  If you want to view a slide show, press 
WS 
to highlight a file and press  d PLAY, MONO/
STEREO. 
About help menu in the [Photo] menu
Menu Buttons  Operation
d  Slide 
Show d 
 
PLAY, MONO/ STEREO Viewing a slide 
show.
wsad  
Move WSAD Moving to another 
file or content.
b 
Select b
 ENTER Viewing a particular 
file.
x   
Close x
 BACK Returning to the 
[Home Menu]. About help menu in the full screen
Menu
Buttons  Operation
Menu m
 
INFO/
DISPLAY Displaying the Option 
menu.
a/d  
Prev./ Next A/D
Moving to another file.
x Listx
 BACK Returning to the 
[Photo] menu.
Options while viewing a photo
You can use various options during viewing a 
photo in full screen.
1. 
While viewing a photo in full screen, press  
m INFO/DISPLAY to display the option menu.
2.  Select an option using 
WSAD.
a
  b c  d e
aCurrent photo/ Total number of photos – 
Use 
AD  to view previous/next photo.
b Slide Show  z/
M – Press 
 ENTER to start 
or pause slide show.
c Speed x3/ x2/ x1 – Use 
 ENTER to select 
a delaying speed between photos in a slide 
show.
d Rotate  – Press 
 ENTER to rotate the photo.
e Go to list – Press 
 ENTER to return [Photo] 
menu.
 
						

							Operating
28
Operating4
Sleep Timer  Setting
Press SLEEP one or more times to select delay time 
between 10 and 180 minutes, after the unit will 
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP 
repeatedly until “SLEEP 10” appears, and then press 
SLEEP once again while “SLEEP 10” is displayed.
 
y You can check the remaining time before 
the Unit turns off.
 
y Press SLEEP The remaining time appears in 
the display window.
 
,Note
Dimmer
Press SLEEP once. The display window will be 
darken by half. To cancel it, press SLEEP repeatedly 
until dim off.
Turn off the sound temporarily
Press  MUTE to mute your unit.
You can mute your unit in order, for example, to 
answer the telephone, appears the MUTE in the 
display window.
Last Scene Memory
r
This unit memorizes last scene from the last disc 
that is viewed. The last scene remains in memory 
even if you remove the disc from the unit or switch 
off the unit. If you load a disc that has the scene 
memorized, the scene is automatically recalled.
System Select - Optional
You must select the appropriate system mode for 
your TV system. Press and hold  M PAUSE/STEP 
for more than five seconds to be able to select a 
system in the [Home Menu].
If the USB device is connected or a disc is 
inserted, this function is not operated.
 
,Note
Adjust the speaker level 
settings
You can adjust the sound level of each speaker.
1. Press  SPEAKER LEVEL repeatedly to select a 
desired speaker to set. 
2. Press  VOL -/+ to adjust the sound level of the 
selected speaker while the level setting memu 
is displayed on the display window.
3.  Repeat and adjust the sound level of the other 
speakers.
VOCAL FADER
You can enjoy the function as karaoke, by reducing 
singer vocal of music in the various source. (MP3/ 
WMA/ CD/ etc.) Press the VOCAL FADER, and 
“FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different 
depending on the recording conditions of music 
files.
 
y This function is available to use only when a 
microphone is connected.
 
y It is not available on the MONO source.
 
,Note
 
						

							Operating29
Operating4
Radio Operations
Be sure that both FM aerials are connected. (Refer 
to the page 17.)
Listening to the radio
1. Press 
P RADIO&INPUT until FM appears in 
the display window. 
The last received station is tuned in.
2.  Press and hold TUNING (-/+) for about two 
seconds until the frequency indication starts to 
change, then release. Scanning stops when the 
unit tunes in a station.
or
 Press  TUNING (-/+) repeatedly.
3.   Adjust the volume by rotating VOL. on the front 
panel or by pressing VOL  (-/+) on the remote 
control repeatedly. 
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned 
down the volume.
1. Press  P RADIO&INPUT until FM appears in 
the display window.
2.  Select the desired frequency by using TUNING 
(-/+).
3. Press  b ENTER a preset number will flash in 
the display window.
4. Press  PRESET (-/+) to select the preset number 
you want.
5. Press  b ENTER.  
The station is stored.
6.  Repeat the steps 2 to 5 to store other stations.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.  
“ERASE ALL” will flash up on the unit display. 
2. Press  CLEAR to erase all saved of the radio 
stations.
Deleting a saved station
1. Press  PRESET (-/+) to Select a preset number 
you want to delete.
2. Press  CLEAR, the preset number will blink in the 
display window.
3.  Press  CLEAR again, to delete the selected preset 
number.
Improving poor FM reception
Press  d PLAY, MONO/STEREO on the remote 
control. This will change the tuner from stereo to 
mono and usually improve the reception.
 
						

							30
Operating4
Operating
Sound adjustment
Setting the surround mode
This system has a number of preset surround sound 
fields. You can select a desired sound mode by 
using SOUND EFFECT.
You can change the SOUND EFFECT using AD 
arrow key while the sound effect information is 
displayed on.
The displayed items for the equalizer maybe 
different depending on sound sources and effects.
On Display Description
NAT PLUS The NAT PLUS is Natural Plus 
sound effect. You can enjoy 
the natural sound effect same 
as a 5.1-channel. (Optional)
NATURAL  You can enjoy comfortable 
and natural sound.(Optional)
POP
CLASSIC JAZZ
ROCK This program lends an 
enthusiastic atmosphere to 
the sound, giving you the 
feeling you are at an actual 
rock pop, jazz or classic 
concert.
BASS The BASS is Bass Blast. During 
playback, reinforce the treble, 
bass and surround sound 
effect.
LOUDNESS Improves the bass and treble 
sound.
BYPASS You can enjoy the sound 
without equalizer effect.  
y In some of surround modes, some speakers, 
there’s no sound or low sound. It depends 
on the mode of surround and the source of 
audio, it is not defective.
 
y You may need to reset the surround mode, 
after switching the input, sometimes even 
after the sound track changed.
 
y This function is not operated when the 
microphone is connected to the unit.
 
,Note