LG Cosmos 3 User Guide

							6969
Icon References When a
Bluetooth®Wireless
Connection is Searched
(neither connected nor paired).
Turn On
Allows you to set the phone's
Bluetooth®power to On/ Off.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Bluetooth Menu.
4. Press the Left Soft Key 
[
Turn On].
NOTEBy default, your device’s
Bluetooth®functionality is turned
off. 
My Device Info
Allows you to view and/or edit the
name of the Bluetooth®device.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Bluetooth Menu.
4. Press the Right Soft Key 
[
Options].
5. Press 
My Device Info.
6. Press  to clear the existing
name.
When an audio device is
found by your device
When a PC is found by your
device
When a PDA is found by your
device
When another phone device
is found by your device
When other undefined
devices are found by your
device
When a carkit device is found
by your device
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 69    CLR                             
						

							70
Settings & Tools
70
7. Slide the QWERTY keyboard
open to enter a new custom
name.
8. Press  to save and exit.
TIPBluetooth®wireless connection is
dependent on your Bluetooth®stereo
device. Even though you want to connect
with a headset that supports both stereo
and handsfree profiles, you may only be
able to connect with one. 
Discovery Mode
Allows you to set whether your
device is able to be searched by
other Bluetooth
®devices in the
area.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Bluetooth Menu.
4. Press the Right Soft Key 
[
Options].
5. Press 
Discovery Mode.
6.
Use the Directional Key  to
highlight Onor Off, then press  .
NOTEIf you choose Onfor Discovery
Mode, your device is able to be
searched by other in-range
Bluetooth
®devices.
Supported Profiles
Allows you to see profiles that your
phone can support.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Bluetooth Menu.
4. Press the Right Soft Key 
[
Options].
5. Press 
Supported Profiles.
TIPSHEADSET: Supports the use of
a compatible Bluetooth®
headset for mono voice.
HANDSFREE: Supports
Bluetooth®headsets, and may
also support other installed
compatible Bluetooth
®devices
with speakerphone capabilities,
such as car kits or a conference
room device. For Handsfree Car
Kit Compatibility, refer to
www.verizonwireless.com/bluet
oothchart on the Verizon
Wireless website.
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 70                               
						

							7171
STEREO: Supports delivery of
stereo audio to a compatible
Bluetooth device.
PHONEBOOK ACCESS: Allows
sharing of your name card,
phonebook entries, and call
history with a compatible
Bluetooth
®device. 
OBJECT PUSH: Allows sending
and receiving of contact name
cards and calendar events
between devices.
FILE TRANSFER: Allows the
capability to send or receive
non-protected data files to a
compatible Bluetooth device.
MESSAGE ACCESS: Allows the
capability to exchange text
messages messages between
Bluetooth capable devices."
The following options are available
in the paired device for phone/PC
devices when pressing the Right
Soft Key 
[Options]:
1. 
Remove Device: You can remove
the device from the pairing list. 
2.
Rename Device: You can rename
the paired device. 
3. 
Incoming Security: Allows you
to set permission before
connecting an incoming device.
4. 
Service Discovery: Allows you tosearch for the services that the
selected device supports.
5. 
Device Info: Shows the device
information. 
NOTESIn the pairing list, you can disconnect the
connected device with the blue arrow
signal by pressing  or by pressing the
Left Soft Key [Turn Off]. Reversely,
you can turn it on by pressing the Left
Soft Key [Turn On]again.
When an audio device is connected, then
you select another device and press  ,
both devices are connected.
In case your search fails to find any
pairing device, select found device
instead.
When connected with a phone or PC
supporting OPP, the following  menus
are possible: 
Send name card: Allows my contact
data to be sent to another device; up
to 1000 Contacts. 
Get name card: Allows you to pull the
name card of the other device. 
Exchange name card: Allows you to
exchange your name card with another
device. 
Send Calendar Event: Allows you to
send up to 300 Calendar events to
another device. 
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 71               
						

							72
5. Keyguard Settings
Allows you to set keypad lock and
unlock options.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Keyguard Settings. 
4.
Use the Directional Key  to
highlight a setting, then press .
The following settings are
available:
Auto Lock
On/ Off
Unlock Options
Press Once/ Press Twice
Lock Options
Keypad Only/ Keypad & Phone
6. Sounds Settings
Provides options to customize the
phone’s sounds.
6.1 Easy Set-up
Allows you to quickly set the main
Sounds settings for the keypad
volume, incoming calls, and
messages (text, multimedia, and
voicemail).
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings.
4.Press Easy Set-up.
5. Read each setting description,
select the setting you want,
then press 
[SET].
NOTESet each alert separately with
Ring Only, Vibrate Only, Ring and
Vibrate, Be Silent.
6.2 Call Sounds
Allows you to set how the phone
alerts you for types of incoming
calls.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Call Sounds.
6.2.1 Call Ringtone
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
Settings & Tools
72
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 72                                     
						

							7373
3. Press Sounds Settings. 
4. Press 
Call Sounds. 
5. Press
Call Ringtone.
6.
Use the Directional Key  to
highlight a ringtone then press 
to save the sound.
TIPTo hear a ringtone before you set it, press
the Left Soft Key  [Play].
6.2.2 Call Vibrate
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Call Sounds. 
5. Press 
Call Vibrate.
6.
Use the Directional Key  to
highlight 
Onor Off, then press
.
6.2.3 Caller ID Readout
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.3. Press 
Sounds Settings. 
4. Press 
Call Sounds. 
5.Press Caller ID Readout. 
6.
Use the Directional Key  to
highlight a setting, then press .
The following settings are
available:
Ring Only/ Caller ID + Ring/
Name Repeat
6.3 Alert Sounds
Allows you to select the alert type
for a new message.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Alert Sounds.
5. Select 
TXT Message/
Multimedia Message/
Voicemail/Emergency Tone
/
Missed Call
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 73                                                     
						

							74
6. The Alert Sounds menu contains
the following options:
Tone/ Vibrate/ Reminder
The exception for this is the
Emergency Tone menu. This
menu has these options:
Alert/ Vibrate/ Off
6.4 Keypad Volume
Allows you to set the keypad
volume.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Keypad Volume.
5. Adjust the volume with the
Directional Key  then press
.
6.5 Digit Dial Readout
Allows you to set the Digit Dial
Readout.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 4. Press 
Digit Dial Readout.
5.
Use the Directional Key  to
highlight 
Onor Off, then press
.
6.6 Service Alerts
Allows you to set any of the five
Alert options to either On or Off.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Service Alerts.
5. Select an alert option.
ERIAlerts you to the status of
cellular service. 
ERI: Enhanced Roaming Indicator
Minute BeepAlerts you 10
seconds before the end of every
minute during a call.
Call ConnectAlerts you when
the call is connected.
Charge CompleteAlerts you
when the battery is completely
charged. 
Settings & Tools
74
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 74                                     
						

							7575
Software UpdateAlerts you of
an Over-The-Air (OTA) software
update to the device.
7. Use the Directional Key  to
highlight 
Onor Off, then press
.
6.7 Power On/Off
Allows you to set the phone to
sound a tone when the phone is
powered on/off.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Power On/Off.
5. Select 
Power On or Power Off.
6. Use the Directional Key  to
highlight 
Onor Off, then press
.
6.8 Voice Clarity
The Voice Clarity feature allows you
to set the phone to automatically
adapt to noisy environments by
adjusting the audio levels to
improve speech intelligibility.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Sounds Settings. 
4. Press 
Voice Clarity.
5. Use the Directional Key  to
scroll to 
Onor Off,then press  .
7. Display Settings
Provides options to customize the
phone’s display screen.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
7.1 Easy Set-up
Allows you quickly set the main
Display Settings.
1. From standby mode, press 
[
MENU]. 
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 75                                         
						

							76
2. Press Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Easy Set-up.
5. Customize the following display
settings:
PERSONAL BANNER
Allows you to enter a string of
up to 18 characters which
displays on the LCD screen.
DISPLAY BACKLIGHT
Set Backlight duration for the
Main screen.
7 Seconds/ 15 Seconds/ 30
Seconds/ Always Off 
KEYPAD BACKLIGHT
Set Backlight duration for the
keypad.
7 Seconds/ 15 Seconds/ 30
Seconds/ Always Off 
WALLPAPER
Set the Main screen wallpaper.
DISPLAY THEMES
Select your device Display
Theme.
White/ Surrealism/ Bookshelf
MENU LAYOUT
Select your Main Menu Layout.
Grid/ List/ Tab
DIAL DIGITS
Set the Dial Digits font size.Resizable/ Small/Normal/
Large
MENU & LIST
Set the Menu & List font size.Resizable/ Small/Normal/
Large
MESSAGE
Set the Message font size.Resizable/ Small/Normal/
Large
CLOCK FORMAT
Select the format of the Main
Clock.
Analog/ Large Analog/ Digital
12/ Large Digital 12/ Digital
24/ Large Digital 24/ Dual
City/ Off
7.2 Banner
Allows you to enter a string of up
to 18 characters which displays on
the LCD screen.
1. From standby mode, press 
[
MENU]. 
Settings & Tools
76
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 76             
						

							7777
2. Press Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Banner.
7.2.1 Personal Banner
1. From standby mode, press 
[
MENU].
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Banner.
5. Press 
Personal Banner.
6. Enter your own banner text.
NOTEPress the Directional Key 
to change the color of the text.
Use the Directional Key  to
select the color you want.
7. Press .
7.2.2 ERI Banner
If you use ERI Service, ERI Text is
shown on the sub banner.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.3. Press 
Display Settings. 
4. Press 
Banner.
5. Press 
ERI Banner.
6. Use the Directional Key  to
highlight 
Onor Off, then press
.
7.3 Backlight
Allows you to set the duration for
illuminating the backlight for the
display and keypad. Each is set
separately.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Backlight.
5. Highlight a Backlight submenu
and press  .
Display Backlight: 7 Seconds/
15 Seconds/ 30 Seconds/
Always Off
Keypad Backlight: 7 Seconds/
15 Seconds/ 30 Seconds/
Always Off
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 77                                                   
						

							78
7.4 Brightness
Allows you to set the backlight
brightness level.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Brightness.
5. Use the Directional Key  to
scroll to a setting, then press  .
7.5 Wallpaper
Allows you to choose the kind of
background to be displayed on the
phone's LCD in standby mode.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Wallpaper.
5. Highlight a Wallpaper submenu
and press  .
My Pictures/Fun Animations/
Slide Show
6. Highlight an available option and
press .
7.6 Charging Screen
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Charging Screen.
5. Use the Directional Key  to
highlight 
Off, Desk Clockor
Calendar, then press  .
7.7 Display Themes
Allows you to choose the color
scheme used in the background of
the LCD screen.
1. From standby mode, press 
[
MENU]. 
2. Press 
Settings & Tools.
3. Press 
Display Settings. 
4. Press 
Display Themes.
5. Use the Directional Key to
highlight 
White, Surrealism, or
Bookshelf, then press  .
NOTEPress the Left Soft Key 
[Preview] to preview the selected
display theme.
Settings & Tools
78
VN251S_VZW_UG_EN_V1.3_150828.qxd  8/28/15  2:55 PM  Page 78