LG Bx401c DLP Projector User Manual

Function
21
1. Press the W.PEAKbutton on the remote control.
2. Press the 
,button to select the screen condition you want.
The default value may change depending on input mode.White peakingcan be adjusted from 0 to 10.Adjust to higher setting to achieve brighter picture. Adjust to lower setting for
darker picture.
You can use this function through the MENUbutton.To exit the menu display press the EXITbutton.
White peaking Function
1. Press the MENUbutton and then use ,button to select the...

Function
22
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the  
,button to selectExpert Coloritem.
3. Press the OKbutton.
Expert color Function
To return to the factory default settings, select [Reset] with , buttons and press OKbutton.
Reset 
- This function allows a user to adjust the Gain, Saturation and Hue for Red,
Green, Blue, Cyan, Magenta and Yellow individually.
Color temp.
Gamma
Gamma curve shift
Brilliant color 
TM
White peaking 10
Expert Color
Reset...

Function
23
Special Menu Options
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the  
,button to selectLanguageitem.
3. Press the 
,button to select the language you want to use.
On-Screen-Display (OSD) is displayed in the selected language.Press the MENUbutton twice or the EXITbutton to exit the menu screen.
Selecting Language
1. Press the RATIObutton.
Each press of the button changes the display as below.
You can also use this function by using the MENUbutton....

Function
24
Flip horizontal Function
* This function reverses the projected image horizontally.
Use this function when rear projecting an image.
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectFlip horizontalitem.
3. Press the OKbutton to see reversed image.
Each time you press the OKbutton, the image will be reversed.Press the MENUbutton twice or the EXITbutton to exit the menu screen.
Flip vertical Function
* This function reverses the projected...

Function
25
1. Press the MENUbutton and then use ,button to select the         menu.
2. Press the 
,button to selectAuto sleepitem.
3. Press the 
,button to select the desired preset time.
Press the MENUbutton twice or the EXITbutton to exit the menu screen.
Auto sleep Function
Presentation timer Function
* This function turns the projector off automatically after the preset time is passed
when there is no signal.
Off10 Min20 Min30 Min60 Min
240 Min180 Min120 Min90 Min
1. Press the TIMERbutton of remote...

Function
26
Using Digital Zoom Function
Adjusting the Zoom Adjusting the Position
* This function is available only in RGB input mode.The Zoom -/+and Position values return to their defaults when
you change the SOURCE or input signal,or turn the power off.
1. Press the ZOOMbutton on the remote control.
2. Press the 
,button to selectZoom -/+item.
1. Press the ZOOMbutton on the remote control.
2. Press the 
,button to selectPositionitem.
Zoom -/+
Position
Reset100             %
MENU Exit          Move...

Function
27
To select a background imageTo initialize keystone
To use keystone function
1. Press the KEYSTONEbutton on the remote control.
2. Press the 
,button to select a item.
1. Press the KEYSTONEbutton on the remote control.
2. Please select a Backgroundimage by 
,button.
3. Please select desiring item by 
,button.
 If there ’s no input signal,it is possible to adjust 
keystone by using the adjusting pattern.
1. Press the KEYSTONEbutton on the remote control.
2. Please select keystone...

Function
28
1. Press the MENUbutton and then use  ,button to select the         menu.
2. Press the 
,button to selectBlank imageitem.
3. Press the  
,button to selectthe color you want to use.
Background image will be altered to the selected Blank image function.You can choose blue, black, green, or captured image for the Blank image.If you have a captured image, you can use it as a blank image instead of logo
image. And you only have one last captured image.
When you select the Captured image,...

Function
29
1. Press the MENUbutton and then use ,button to select the         menu.
2. The used lamp time is displayed.
When projector lamp is reaching the end of its life, the lamp indicator will turn
red. (Refer to the page 10.)
The lamp warning LED illuminates red continuously in the case of excessive
lamp time.
 Press the MENUbutton twice or the EXITbutton to exit the menu screen.
Checking lamp time
1. Press the STILLbutton of remote control.
* You can freeze the input image.
2. To exit STILL,...

Function
30
1. Press the AUTO button of the remote controller.Image positioning and synchronization are automatically adjusted.
2. If any more manual adjustment is needed according to the various PC
mode inputs even after the auto-correction, execute 
Phase, Clock,
Horizontal 
andVertical function in       menu. In certain circumstances,
you can’t get the best picture quality by only using auto-correction.
Auto configure Function
* This function assures you of getting the best video quality by...