LG Bh9520tw Owners Manual

							Connecting31
Connecting2
USB device connection
This player can play movie, music and photo files contained in the USB device.
Playback content in the USB 
device
1. Insert a USB device to the USB port until it fits into place.
When you connect the USB device on the HOME menu, the player plays a music file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear.
File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading.
2. Press HOME ().
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select the [USB] option using W/S, and press ENTER (b).
5. Select a file using W/S/A/D, and press PLAY or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
 
y This player supports USB flash drive/external 
HDD formatted in FAT16, FAT32 and NTFS 
when accessing files (music, photo, movie). 
However, for BD-Live, only FAT16 and FAT32 
formats are supported. Use the USB flash 
drive/external HDD formatted in either 
FAT16 or FAT32 when using BD-Live and 
Audio CD recording.
 
y The USB device can be used for the local 
storage for enjoying BD-LIVE discs with 
Internet.
 
y This unit can support up to 4 partitions of 
the USB device.
 
y Do not extract the USB device during 
operation (play, etc.). 
 
y A USB device which requires additional 
program installation when you have 
connected it to a computer, is not 
supported.
 
y USB device: USB device that supports 
USB1.1 and USB2.0.
 
y Movie, music and photo files can be played. 
For details of operations on each file, refer to 
relevant pages.
 
y Regular back up is recommended to 
prevent data loss.
 
y If you use a USB extension cable, USB HUB 
or USB Multi-reader, the USB device may not 
be recognized.
 
y Some USB device may not work with this 
unit.
 
y Digital camera and mobile phone are not 
supported.
 
y USB Port of the unit cannot be connected 
to PC. The unit cannot be used as a storage 
device.
 
,Note
 
						

							3 System Setting
System Setting32
System  Setting3
Settings
Initial Setup
When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network settings and speaker setup on the initial setup wizard.
1. Press 1 (POWER). 
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language and press ENTER (b).
3. Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
If wired network is connected , the network connection setting will automatically be finished.
4. All available networks are displayed on the screen. Use W/S to select [ Wired Network] or desired SSID of wireless network and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.
5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
6. Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen. For details on network settings, refer to "Connecting to your Home Network" on page 26.
7.  Select [Next] and press ENTER (b).
Read and prepare the preparations for the wireless speaker setting.
 
						

							System Setting33
System Setting3
8. Select [Next] and press ENTER (b).
9.  Press ENTER (b) to verify the test tone signals of the speakers. 
After verifying the test tone signals, press ENTER (b) while [Stop] is highlighted.  Select [Next] and press ENTER (b).
10.  Check all the settings that you have set in the previous steps.
Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select [Previous] and press ENTER (b).
Adjust the Setup Settings
You can change the settings of the player in the [Setup] menu.
1. Press HOME ().
2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears.
3. Use W/S to select the first setup option, and press D to move to the second level.
4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection.
 
						

							System Setting34
System  Setting3
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is 
set to higher than 720p. 
,Note
Resolution
Sets the output resolution of the HDMI video signal. Refer to page 22 for details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. 
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select  [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input.
 
y When you select [24 Hz], you may 
experience some picture disturbance when 
the video switches video and film material. 
In this case, select [50 Hz].
 
y Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with 
1080p/24 Hz, the actual frame frequency of 
the video output will be 50 Hz to match the 
video source format. 
,Note
 
						

							35
System Setting3
HDMI Color Setting
Select the type of output from the HDMI OUT jack. For this setting, please refer to the  manuals of your display device. 
[YCbCr]
Select when connecting to a HDMI display device.
[RGB]
Select when connecting to a DVI display device.
3D Mode
Select the type of output mode for Blu-ray 3D disc playback. 
[Off ]
Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback. 
[On]
Blu-ray 3D disc playback will output as 3D mode.
Wallpaper
Changes the background of the initial screen.
Home Menu Guide
This function allows you to display or delete the guide bubble on the Home Menu. Set this option to [On] for displaying guide.
[LANGUAGE] Menu 
Display Menu
Select a language for the [Setup] menu and on-screen display.
Disc Menu/Disc Audio/ 
Disc Subtitle
Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
[Original] 
Refers to the original language in which the disc was recorded.
[Other]
Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 72.
[Off ] (Disc Subtitle only)
Turn off Subtitle.
Depending on the disc, your language setting 
may not work.
 
,Note
 System Setting
 
						

							System Setting36
System  Setting3
[AUDIO] Menu 
Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. 
Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 76 for details. 
,Note
Digital Output
[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder. 
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. 
[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with DTS decoder. 
[BitStream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
 
y When [Digital Output] option is set to [PCM 
Multi-Ch], the audio may output as PCM 
Stereo if the PCM Multi-Ch information is 
not detected from HDMI device with EDID.
 
y If the [Digital Output] option is set to [DTS 
Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted 
for the other discs (like [BitStream]).
 
y This setting is not available on the input 
signal from an external device.
 
,Note
Speaker Setup
To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker. 
[Distance]
Adjust the distance between each speaker and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone. 
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
 
						

							System Setting37
System Setting3
HD AV Sync
Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. 
DRC (Dynamic Range Control) 
This function allows you to listen to a movie at a lower volume without losing clarity of sound.
[Off ]
Turns off this function.
[On]
Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio output is specified by itself.  And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode.
The DRC setting can be changed only when a 
disc is not inserted or the unit is in complete 
stop mode. 
,Note
Connect wireless speakers
When the unit is manufactured, the ID is already set. If interference occurs or you use a new wireless unit, an ID should be set again.
 
						

							System Setting38
System  Setting3
[LOCK] Menu
The [LOCK] settings affect only BD-ROM and DVD playback.
To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created.  If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The password is cleared.
If you make a mistake before pressing ENTER 
(
b ), press CLEAR. Then input the correct 
password. 
,Note
DVD Rating 
Blocks playback of rated DVD based on their content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.
[255] 
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding ratings recorded on them.
The [Blu-ray Disc Rating] will be applied only 
for the BD disc that containing the Advanced 
Rating Control.
 
,Note
Area Code 
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 71.
 
						

							System Setting39
System Setting3
[NETWORK] Menu
The [NETWORK] settings are needed to use the software update, BD Live and on-line content services.
Connection Setting
If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on page 26.)
Connection Status
If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE contents.
[Partially permitted]
Internet access is permitted only for BD-LIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE contents.
Premium/LG Apps
[Country Setting]
Select your area for displaying proper services and contents on the [Premium] and [LG Apps] feature.
Device Name
You can make a network name using virtual keyboard. This player will be recognised by the name you are entering on your home network.
Wi-Fi Direct
This player is a Wi-Fi Direct™ certified device. Wi-Fi Direct™ is the technology that devices to connect each other without connecting to an Access point or a router. Set this option to [On] for activating the Wi-Fi Direct™ mode. Refer to page 44 for the device connection.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand ( VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the deactivation code.
All the downloaded videos from DivX(R) VOD 
with this player’s registration code can only be 
played on this unit. 
,Note
 
						

							System Setting40
System  Setting3
Network Play
This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
 
y This unit and the DLNA Certified Smartphone 
must be connected to the same network.
 
y To use the [Network Play] function using a 
DLNA certified smartphone, press HOME 
(
) to display the home menu before 
connecting to this unit.
 
y While controlling the unit using the [Network 
Play] function, the remote control may not work.
 
y Available file formats described on page 
10 are not always supported on [Network 
Play] function.
 
,Note
Auto Power Off
The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 20 minutes since the Screen Saver is displayed. Set this option to [Off ] to leave the screen saver until the unit is operated by the user.
Depending on the function, this function may 
not be available. 
,Note
Initialize
[Factory Set]
You can reset the player to its original factory settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the connected USB storage.
If you reset the player to its original factory 
settings using [Factory Set] option, you have 
to set all the activation for the on-line services 
and network settings again. 
,Note
Software 
[Information]
Displays the current software version.
[Update]
You can update the software by connecting the unit directly to the software update server (see page "Network Software Update" on page 67).
Disclaimer Notice
Press ENTER (b) to view the notice of Network Service Disclaimer.