LG 55lw5600 Led Lcd Tv Owners Manual
Have a look at the manual LG 55lw5600 Led Lcd Tv Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DivX supported mode File ExtensionsAudio/VideoCodec Profile/Level Support Explanation .asf.wmv Video VC-1 Advanced ProfileAdvanced Profile@Level 3 (e.g. 720p60, 1080i60, 1080p30)Only streams compliant to SMPTE 421M VC-1 standard are supported.VC-1 Simple and Main Profiles Simple Profile@Medium Level (e.g. CIF, QVGA)Main Profile@High Level (e.g. 1080p30) AudioWMA Standard WMA 9 Professional .divx.avi Video DivX3.11 Global motion compensation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. DivX4DivX5DivX6Advanced Simple Profile(e.g. 720p/1080i) XViD H.264 / AVCMain Profile@ Level 4.1High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30) AudioMPEG-1 Layer I, IIMPEG-1 Layer III (MP3)Dolby Digital .mp4.m4v.mov Video H.264 / AVCMain Profile@ Level 4.1High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30) Global motion compensation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. MPEG-4 Part 2Advanced Simple Profile (e.g. 720p/1080i) AudioAACAAC-LC and HE-AAC .mkv VideoH.264 / AVCMain Profile@ Level 4.1High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30) Most of the MKV content available is encoded by the open source x264 codec. AudioHE-AACHE-AAC-LC and HE-AAC Dolby Digital .ts.trp.tp Video H.264 / AVCMain Profile@ Level 4.1High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30) MPEG-2Main Profile@High Level(e.g. 720p60, 1080i60) VC-1 Simple Profile@Medium Level(e.g. CIF, QVGA)Main Profile@High Level(e.g. 1080p30)Advanced Profile@Level3(e.g. 720p60, 1080i60, 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. Audio MPEG-1 Layer I, IIMPEG-1 Layer III (MP3)Dolby DigitalDolby Digital Plus AACAAC-LC and HE-AAC .vob Video MPEG-1 MPEG-2Main Profile@High Level (e.g. 720p60, 1080i60) AudioDolby DigitalMPEG-1 Layer I, IIDVD-LPCM .mpgVideoMPEG-1Main Profile@High Level (e.g. 720p60, 1080i60)Only streams compliant configured properly for TS, PS or ESAudioMPEG-1 Layer I, II 1\f1 ENGENGLISH SPECIFICATIONS
3D supported formats InputSignalResolutionHorizontalFrequency (kHz) Vertical Frequency(Hz)Playable 3D video format HDMI 720p1280x72045.0060y»Side by Sidey»Top & Bottomy»HDMI 3D Top & Bottom 90.0060y»HDMI 3D Frame Packing 1080i1920x108033.7560y»Side by Sidey»Top & Bottomy»HDMI 3D Side by Side (Half) 1080p1920x1080 67.5060 y»Side by Sidey»Top & Bottomy»Checker Boardy»Single Frame Sequential 27.0024 y»Side by Sidey»Top & Bottomy»Checker Boardy»HDMI 3D Top & Bottom 54.0024y»HDMI 3D Frame Packing 67.50 ( LCD )30y»HDMI 3D Frame Packing 33.7530y»Side by Sidey»Top & Bottomy»Checker Board Component ( Plasma ) 720p1280x72044.9659.94y»Side by Sidey»Top & Bottom45.0060.00 1080i1920x108033.7259.94y»Side by Sidey»Top & Bottom33.7560.00 RGB-PC1080p1920x108066.58759.934y»Side by Sidey»Top & Bottom USB1080p1920x108033.7530 y»Side by Sidey»Top & Bottomy»Checker Boardy»MPO (Photo) DLNA1080p1920x108033.7530y»Side by Sidey»Top & Bottomy»Checker Board SignalPlayable 3D video format DTV720p, 1080iy»Side by Sidey»Top & Bottom yyMedia contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom to play in 3D. yyVideo, which is input as HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom format, is switched into the 3D screen automatically. 1\f\f ENGENGLISH SPECIFICATIONS
Wireless LAN for Broadband/DLNA Adaptor SPEC (For LW9500 series)
This device only works with compatible LG TV.
StandardIEEE802.11a/b/g/n
Frequency Range2402 to 2483 MHz5150 to 5250 MHz5725 to 5850 MHz
ModulationCCK / OFDM / MIMO
Output Power (Typical)
802.11a: 14 dBm802.11b: 17 dBm802.11g: 14 dBm802.11n: 13 dBm
Data rate802.11a/g: 54 Mbps802.11b: 11 Mbps802.11n: 300 Mbps
Antenna Gain (Typical)2402 to 2483 MHz: 1.17 dBi5150 to 5250 MHz: 4.67 dBi5725 to 5850 MHz: 3.30 dBi
Occupied bandwidth802.11a/b/g: HT20 802.11n: HT20/40
Because band channel used by the country could be different, the user can not change or adjust the
operating frequency and this product is set for the regional frequency table.
yyFCC ID of Wi-Fi module inside TV
FCC ID: BEJWN8522D1
RF module (BM\bLDS\f01) specification
(For LW7700, LW9500, LZ9700, PZ750, PZ950, PZ950U series)
For TV By using a 2.4 GHz bandwidth radio frequency(RF).
yyOutput: 1 dBm or lower
yyMaximum Communication Distance: 10 m (30 ft) in an open space
yyBandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
yyTransfer Rate: 250 kbps
yyFCC ID of RF module inside TV
FCC ID: BEJLDS201
1\f3
ENGENGLISH
SPECIFICATIONS
IR CODES (Depending on model) How to Connect Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917kHz signal at 455kHz T1Tc Frame configuration 1st frame C0 C1C2C3C4C5C6C7 C0C1C2C3C4C5 C6C7D0D1 D2D3 D4D5 D6D7 D0D1D2D3 D4D5D6D7 Lead code Low cu\ftom code H\bgh cu\ftom code Data code Data code Repeat frame Repeat cod e Tf Lead code 4.5 ms 9 ms Repeat code 2.25 ms 9 ms 0.55 ms Bit description 0.56 ms 1.12 ms0.56 ms 2.24 ms Bit “0” Bit “1” Frame interval: Tf The waveform is transmitted as long as a key is depressed. TfTf Tf=108ms @455KHz 1\f4 ENGENGLISH IR CODES
Code (Hexa)FunctionNoteCode (Hexa)FunctionNote 08POWERRemote control Button (Power On/Off)0FTVRemote control Button DC3DRemote control Button 45Q.MENURemote control Button5BEXITRemote control Button 43HomeRemote control ButtonD6TVDiscrete IR Code(TV Input Selection)0BINPUTRemote control Button 10 - 19Number Key 0-9Remote control ButtonC4POWER ONDiscrete IR Code(Only Power Off)4C- (Dash)/LIST Remote control Button 1AFLASHBKRemote control ButtonC5POWER OFFDiscrete IR Code(Only Power Off)09MUTE/DELETERemote control Button 02VOL +Remote control Button5AAV1Discrete IR Code(AV1 Input Selection)03VOL -Remote control Button 00CH ^Remote control ButtonD0AV2Discrete IR Code(AV2 Input Selection)01CH vRemote control Button 1EFAV/MARKRemote control ButtonBFCOMPONENT1Discrete IR Code(Component1 Input Selection)40^Remote control Button 41vRemote control ButtonD4COMPONENT2Discrete IR Code(Component2 Input Selection)07Remote control ButtonD5RGB-PCDiscrete IR Code(RGB-PC Input Selection) 44ENTERRemote control Button 28BACKRemote control ButtonCEHDMI1Discrete IR Code(HDMI1 Input Selection) 79RATIORemote control Button BA ( Plasma)FREEZERemote control ButtonCCHDMI2Discrete IR Code(HDMI2 Input Selection)95ENERGY SAVINGRemote control Button 7ESIMPLINKRemote control ButtonE9HDMI3Discrete IR Code(HDMI3 Input Selection)AAINFORemote control Button 30AV MODERemote control ButtonDAHDMI4Discrete IR Code(HDMI4 Input Selection)72REDRemote control Button 71GREENRemote control Button76Ratio 4:3Discrete IR Code(Only 4:3 Mode)63YELLOWRemote control Button 61BLUERemote control Button77Ratio 16:9Discrete IR Code(Only 16:9 Mode)B1nRemote control Button B0Remote control ButtonAFRatio Cinema ZoomDiscrete IR Code(Only Cinema Zoom Mode)BAyyRemote control Button 8ERemote control Button 8FRemote control Button yyUse the feature depending on your model. 1\f5 ENGENGLISH IR CODES
EXTERNAL CONTROL DEVICE SETUP RS\b\f3\fC Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE yyRS-232C on this TV is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C connection cables are not supplied with the product. Type of connector; D\bSub 9\bPin Male 15 69 RS-232C IN (CONTROL & SERVICE) No.Pin name 1No connection 2RXD (Receive data) 3TXD (Transmit data) 4DTR (DTE side ready) 5GND 6DSR (DCE side ready) 7RTS (Ready to send) 8CTS (Clear to send) 9No Connection 1\f6 ENGENGLISH EXTERNAL CONTROL DEVICE SETUP
RS\b\f3\fC configurations 7-Wire Configuration (Serial female-female NULL modem cable) PCTV RXD 2 3TXD TXD 3 2RXD GND 5 5GND DTR 4 6DSR DSR 6 4DTR RTS 7 8CTS CTS 8 7RTS D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) PC TV RXD 2 3TXD TXD 3 2RXD GND 5 5GND DTR 4 6DSR DSR 6 4DTR RTS 7 8CTS CTS 8 7RTS D-Sub 9 D-Sub 9 Set ID Set ID number. ?ꔀꔉ • Language • Caption : Off • ISM Method : Normal • Power Indicator • Pointer • Smart Share Setting • Initial Setting • Set ID : 1 • Mode Setting : Home Use OPTIONꔂ Move ꔉ Enter Exit 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to OPTION and press ENTER. 4 Press the Navigation buttons to scroll to Set ID and press ENTER. 5 Scroll left or right to select a set ID number and select CLOSE . The adjustment range is 1-99. 6 When you are finished, press EXIT. *Real data mapping 0 : Step 0 … A : Step 10 (SET ID 10) … F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) … 63 : Step 99 (SET ID 99) 64 : Step 100 1\f7 ENGENGLISH EXTERNAL CONTROL DEVICE SETUP
Command reference list Communication Parameters yyBaud rate: 9600 bps (UART) yyData length: 8 bits yyParity : None yyStop bit: 1 bit yyCommunication code: ASCII code yyUse a crossed (reverse) cable. COMMAND1COMMAND2DATA(Hexadecimal)COMMAND1COMMAND2DATA(Hexadecimal) 01. Powerka00 - 0114. Treblekr00 - 64 02. Input Selectxb(See p.130)15. Bassks00 - 64 03. Aspect Ratiokc(See p.130)16. Balancekt00 - 64 04. Screen Mutekd00 - 0117. 3D (For 3D TV)xt(See p.131) 05. Volume Muteke00 - 0118. Color Temperaturexu00 - 64 06. Volume Controlkf00 - 6419.Extended 3D (For 3D TV)xv(See p.131) 07. Contrastkg00 - 6420. ISM Method ( Plasma )jp(See p.132) 08. Brightnesskh00 - 6421. Energy Savingjq(See p.132) 09. Colorki00 - 6422. Auto Configurationju(See p.132) 10. Tintkj00 - 6424. Channel Add/Delmb00 - 01 11. Sharpnesskk00 - 6425. Keymc(See p.132) 12. OSD Selectkl00 - 0126. Backlight ( LCD ) mg00 - 64 13. Remote Control Lock Modekm00 - 01 COMMAND1COMMAND2DATA00(Hexadecimal)DATA01(Hexadecimal)DATA02(Hexadecimal)DATA03(Hexadecimal)DATA04(Hexadecimal)DATA05(Hexadecimal) 23. Channel Tuningmaphysicalprogram high majorprogram lowmajor lowminor highminor lowattribute 1\f8 ENGENGLISH EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol. [DATA] : To transmit the command data. Transmit the ‘FF’ data to read status of command. [Cr] : Carriage Return ASCII code ‘0x0D’ [ ] : ASCII code ‘space (0x20)’ * In this model, set will not send the status during the standby mode. OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. * In this model, set will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’. [DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’. [OK] : Use the large character. Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non- viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time * In this model, set will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’. [DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’. [NG] : Use the large character 1\f9 ENGENGLISH EXTERNAL CONTROL DEVICE SETUP
01. Power (Command: k a)To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.* Note: In this model, set will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command: x b)To select input source for set. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00: DTV (Antenna) Data 01: DTV (Cable)Data 10: Analog (Antenna) Data 11: Analog (Cable)Data 20: AV or AV1 Data 21: AV2Data 40: Component1 Data 41: Component2Data 42: Component3 Data 60: RGB-PCData 90: HDMI1 Data 91: HDMI2Data 92: HDMI3 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] * Use the feature depending on your model. 03. Aspect Ratio (Command: k c)To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3 Data 09: Just scanData 02: 16:9 Data 10: Cinema Zoom 1Data 06: Set by program … Data 1F: Cinema Zoom16 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 04. Screen Mute (Command: k d)To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen mute off (Picture on), Video-out Mute offData 01: Screen mute on (Picture off)Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] * In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). 05. Volume Mute (Command: k e)To control volume mute on/off.You can also adjust mute using the MUTE button onremote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00: Volume mute on (Volume off)Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 06. Volume Control (Command: k f)To adjust volume.You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 07. Contrast (Command: k g)To adjust screen contrast.You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 08. Brightness (Command: k h)To adjust screen brightness.Y o u c a n a l s o a d j u s t b r i g h t n e s s i n t h e P I C T U R E menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i)To adjust screen color.You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 10. Tint (Command: k j)To adjust screen tint.You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] 11. Sharpness (Command: k k)To adjust screen sharpness.You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)*Refer to “Real data mapping”. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 130 ENGENGLISH EXTERNAL CONTROL DEVICE SETUP