LG 55le7510 Owners Manual

17
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection \
of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Resolution .
4Select the desired resolution.
5
Auto Config.
SCREENMove Prev.
Resolution
Position
Size
Phase
Reset
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh...

18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if char\
acters are still trembling, adjust 
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Position , Size  or Phase.
4 Make appropriate...

19
EXTERNAL EQUIPMENT SETUP
NETWORK SETUP
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical 
connection, the TV needs to be set up for network communication.
CAUTION
 
► Do not connect a modular phone cable to the LAN port.
 
► Since there are various connection methods, please follow the specificat\
ions of your 
telecommunication carrier or internet service provider. 
Wired Network Connection
1Connect the LAN port of the Modem or Router to the LAN 
port...

20
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Wired Network Setup
1Select NETWORK.
2Select Network Setting.
3
Select Wired.
4If you already set Network Setting: Select Resetting. The new connection settings 
resets the current network settings.
5
Select  IP Auto Setting  or IP Manual Setting .
When Selecting IP Manual Setting:
IP addresses will need to be input manually.
6
Select OK.
If wired and wireless networks are both available, wired is the preferre\
d method.
After making a physical...

21
EXTERNAL EQUIPMENT SETUP
 
■ This feature requires an always-on broadband internet connection.
 
■ You do not need to connect to a PC to use this function.
 
■ If Network Setting is not working, check your network conditions. Check the LAN cable and \
make sure your router has DHCP turned on if you wish to use the Auto Setting. 
 
■ If the  Network Setting is not completed, network may not operate normally. 
 
■ IP Auto Setting : Select it if there is a DHCP server on the local area network (LAN) via...

22
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
NOTE
► For more information about Netcast setup and troubleshooting, visit  http://lgknowledgebase.
com. Search for Netcast.
► Use a standard LAN cable with this TV. Cat5  or better with a RJ45 connector.
► Many network connection problems during set  up can often be fixed by re-setting the router 
or modem. After connecting the player to the 
home network, quickly power off and/or dis-
connect the power cable of the home network 
router or cable...

23
EXTERNAL EQUIPMENT SETUP
The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan 
network.
The network configuration and connection method may vary depending on th\
e equipment in use and 
the network environment. Refer to the setup instructions supplied with y\
our access point or wireless 
router for detailed connection steps and network settings.
Wireless Network Connection
1Connect the “LG Wireless LAN for Broadband/DLNA 
Adaptor” to the USB IN 1 or USB IN 2 jack...

24
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Setting up the AP (Access Point) or the wireless router is required before connecting t\
he TV to the network.
Wireless Network Setup
6Scan the all available AP (Access 
Point) or wireless routers within range 
and display them as a list. 
7Select an AP (Access Point) or 
wireless router on the list. 
(If your AP is locked, insert the 
security key of AP).
8Input the security key of AP.
1Select NETWORK.
2Select Network Setting.
3
Select Wireless.
4If...

25
EXTERNAL EQUIPMENT SETUP
If you want to connect the AP (Access Point) or router with PIN, use this feature.
When a security code is already set
PIN (Personal Identification Number)
 
■ PIN number is the unique 8 digit number 
of the dongle.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press ‘Connect’ button.
PIN NUMBER : 12345670
Connect
 For more information, check the AP manual.
ꔉ Next
2
REDConnect the access point with 
PIN 
mode.
4Select  Connect.
1Repeat step 1-6  on P.24....

26
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available 
to use your access point or wireless router within 120 counts. You do not need to know the access 
point name (SSID: Service Set Identifier) and security code of your ac\
cess point or wireless router.
Simple setting (WPS-button mode)
Simple setting (WPS-button mode)
Press PBC mode button of AP and press ‘Connect’ button.
Connect
Caution: Check if...