LG 55le5510 Owners Manual

							A-57
PREPARATION
1
11
0 to 9 number button
(Space)
LIST
Q.VIEW Selects a programme.
Selects numbered items in a menu.
Opens an empty space on the screen keyboard.
Displays the programme table. (► p.55)
Returns to the previously viewed programme.
]
TELETEXT 
BUTTONS
SUBTITLE These buttons are used for teletext.
For further details, see the ‘T
eletext’ section.
( ►
 p.177)
Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu 
appears at the screen. (►
 p.62)
Coloured 
buttons
L/R SELECT These buttons are used for teletext (on 
TELETEXT 
models only),  Programme edit.
Use this to view 3D video.  (►  p.89)
@Direct access to your internet portal of entertainment 
and news services developed by Orange
. (Only 
France)
FREEZE Pause the present picture at the screen.  (It doesnt
work at USB Mode and Simplink.)
The TV returns to normal viewing automatically if 
no signal is received or no operation is performed 
for 5 minutes.
If you keep the screen in Freeze condition, the 
residual image can exist.
 
						

							A-58
PREPARATION
PREPARATION
Installing Batteries
 
■ Open the battery compartment cover on the back and install 
the batteries matching correct polarity (+with +,-with -). 
 
■ Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
 
■ Close cover

.
 
■ To remove the batteries, perform the installation actions in 
reverse.
SIMPLINK / 
MY MEDIA  Menu    
control buttons Controls SIMPLINK or MY MEDIA menu (Photo List, 
Music List and Movie List).
VOLUME UP
/DOWN
MARK
FAV
CHAR/NUM 
3D
DELETE  MUTE
Programme UP/DOWN
PAGE UP/ DOWN Adjusts the volume. 
Select the input to apply the Picture Wizard 
settings.
Check and un-check programmes in the USB 
menu.
Displays the selected favourite programme.
Shifts the Character or Number for NetCast menu. 
Use this to view 3D video. (
► p.88)
Deletes the entered character when entering the 
character on the screen keyboard. 
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the 
next one.
 
						

							A-59
PREPARATIONSimple Remote Control (Only 50/60PK9***, 50/60PX9
***)
 (
POWER)
TV/INPUT
VOLUME UP /DOWN
MUTE
Programme UP/DOWN Switches the TV on from standby or off to standby.
External input mode rotate in regular sequence.
(► p.57)
Adjusts the volume. 
Switches the sound on or off.
Selects a programme.
0 to 9 number 
button
OK
Q.VIEW Selects a programme.
Selects numbered items in a menu.
Accepts your selection or displays the current 
mode.
Returns to the previously viewed programme.
Installing Batteries
 
■ Open the battery compartment cover 
on the back and install the batteries 
matching correct polarity (+with 
+,-with -). 
 
■   Install two 1.5V AAA batteries. Do not 
mix old or used batteries with new 
ones.
 
■   Close cover.
 
■ To remove the batteries, perform the 
installation actions in reverse.
 
						

							1
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
 
■ For optimum picture quality, adjust antenna direction.
 
■  
An antenna cable and converter are not supplied.
 
■ To prevent damage do not connect to the mains outlet until all connection\
s are made between the 
devices.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor 
Antenna
(VHF, UHF) Wall 
Antenna 
Socket
RF Coaxial Wire (75 
Ω)
Antenna
UHF
Signal
Amplifier
VHF
 
■ In poor signal areas, to achieve better picture quality it may be necess\
ary to install a signal amplifier 
to the antenna as shown above.
 
■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
 
						

							2
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
 
■ To avoid damaging any equipment, never plug in any power cord until you h\
ave finished connecting 
all equipment.
 
■ This section on EXTERNAL EQUIPMENT SETUP  mainly uses diagrams for the 32/37/42/47/55LE7
*** 
models.
 
■ Image shown may differ from your TV.
This TV  can receive Digital RF/Cable signals without an external digital set-top\
 box. However, if you do 
receive Digital signals from a digital set-top box or other digital exte\
rnal device, refer to the diagram as 
shown below.
 
► HDMI Audio Supported format : Dolby Digital, PCM.
  DTS Audio format is not supported. 
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i OX
480p/576p
 OO
720p/1080i OO
1080p O 
(50 Hz / 60 Hz only)
O(24 Hz / 30 Hz / 
50 Hz / 60 Hz)
 Component ports on the TV Y PBPR
Video output ports 
on DVD player YP
BPR
Y B-Y R-Y
YCbCr
YPbPr
1Connect the video outputs 
(
Y,  PB, PR) of the 
external equipment (digital set-top box, DVD, 
etc.) to the  COMPONENT IN VIDEO  jacks on 
the TV. 
2Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the 
COMPONENT IN AUDIO jacks on the TV.
3Turn on the external equipment. 
( Refer to the external equipments manual for 
operating instructions.)
4Select the Component1  input source using the 
INPUT button on the remote control.
If connected to COMPONENT IN 2, select
Component2 input source.
1
2
1
2
or
 
						

							3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
NOTE
 
► The TV can receive video and audio signals simultaneously 
when using an HDMI cable.
 
► If the DVD does not support Auto HDMI, you must set the 
output resolution appropriately.
 
► Check that your HDMI cable is High Speed HDMI Cable. If 
the HDMI cables are not High Speed HDMI Cable, flickering 
or no screen display can result. Please use the High Speed 
HDMI Cable.
1Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1(DVI),  HDMI/DVI IN 2, 
HDMI/DVI IN 3 or HDMI IN 4 (Except for 32/37/42LD4 ***, 
32/37/42/47/55LD6 ***, 32/42/47LD7
***, 32/37/42LD8
***) 
jack 
on the 

TV.
2Turn on the external equipment.  
(Refer to the external equipments manual for operating
instructions.)
3Select  HDMI1, HDMI2, HDMI3 or  HDMI4 (Except for 
32/37/42LD4 ***, 
32/37/42/47/55LD6
***, 32/42/47LD7
***, 
32/37/42LD8 ***) 
input source using the  INPUT button on the 
remote control.
    
1
 
						

							4
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1Connect the digital set-top box or the DVI out-
put of the PC to HDMI/DVI IN 1(DVI) jack on 
the TV.
2Connect the audio output of the digital set-top 
box or the PC audio output to the AUDIO IN 
(RGB/DVI)  jack on the TV.
3Turn on the digital set-top box or the PC and 
the TV. 
(
Refer to the digital set-top box or the PC 
manual for operating instructions.)
4Select HDMI1  input source using the  INPUT 
button on the remote control.
    
12
or
 
						

							5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
ScartInput
Output
Video Audio RGB Video, Audio
AV 1
OOOAnalogue TV, Digital TV
NOTE
 
►  
Any Euro scart cable used must be signal shielded.
 
► When watching digital 
TV in 3D imaging mode, monitor out signals cannot be output through the \
SCART cable.  (Only 42/47LX6
***, 47/55LX9
***, 50/60PX9
***)
 
►  If you set the 3D mode to On while a scheduled recording is performed on\
 digital TV, monitor out 
signals cannot be output through the SCART cable, and the recording cannot be performed.  
(Only 42/47LX6 ***, 47/55LX9
***, 50/60PX9
***)
 
►   TV Out : Outputs Analogue TV 
or Digital TV signals.
1Connect the Euro scart socket of the external 
equipment (DVD, VCR, etc.) to the  AV 1 Euro 
scart socket on the TV.
2Turn on the external equipment. 
(Refer to the external equipments manual for 
operating instructions.)
3Select AV 1  input source using the  INPUT but-
ton on the remote control.
    
1
                Output Type 
Current 
input mode AV 1
(TV Out) AV 1
(When DTV scheduled recording is in 
progress using recording equipment.)
Digital TV Digital TVO
Analogue TV, AV Analogue TVO
(The input mode is converted to DTV.)Component/RGB Analogue TV
HDMI X X
 
						

							6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
USB SETUP
1Connect the USB device to the  USB IN 1 or 
USB IN 2  jack on the 
 TV.
2After connecting the USB IN 1 or USB IN 2 
jack, you use the USB  function. (
►  p.90) 
    
CONNECTING WITH AN RF CABLE
To avoid picture noise (interference), allow adequate distance between \
the VCR and TV.
1Connect the ANT OUT socket of the VCR to 
the  ANTENNA IN socket on the  TV.
2  Connect the antenna cable to the  ANT IN 
socket of the VCR.
3Press the PLAY button on the VCR and match 
the appropriate channel between the TV and 
VCR for viewing.
    Wall Jack
Antenna
1
2
1
or