LG 55le5500 Owners Manual

							7
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN RCA CABLE
NOTE
 
► If you have a mono VCR, connect the audio cable from 
the VCR to the AUDIO L/MONO  jack of the TV.
1Connect the AUDIO/VIDEO jacks  between TV 
and VCR or external equipment. Match the 
jack colours (Video = yellow, Audio Left = 
white, and Audio Right = red)
2Insert a video tape into the VCR and press 
PLAY on the VCR.  (
Refer to the VCR owner’s 
manual. )
 
Or, Operate the corresponding external equip-
ment. 
(Refer to external equipment operating guide.)
3Select AV 2 input source using the  INPUT but-
ton on the remote control.
If connected to A
 V IN 3, select AV 3  input 
source.
1
Camcorder Video Game Set
or
1
Camcorder
Video Game Setor or
 
						

							8
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TVs set-
tings. 
1Connect the RGB output of the PC to the RGB 
IN (PC) jack on the TV.
2Connect the PC audio output to the  AUDIO IN 
(RGB/DVI) jack on the TV. 
3Turn on the PC and the TV
4Select  RGB input source using the INPUT but-
ton on the remote control.
    
21
 
						

							9
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP
You can listen the sound through the headphone.
NOTE
 
► AUDIO menu items are disabled when connecting a headphone.
 
► When changing AV MODE with a headphone connected, the change is applied to video but no\
t to audio.
 
► Optical Digital Audio Out is not available when connecting a headphone.
 
► Headphone impedance:  16 Ω 
 
► Max audio output of headphone:  10 mW to 15 mW
1Plug the headphone into the headphone socket.
2To adjust the headphone volume, press the  
+ or - button. If you press the MUTE button, 
the sound from the headphone is switched of
 f.
    
INSERTION OF A CI MODULE
To view the encrypted (pay) services in digital TV mode.
This feature is not available in all countries.
NOTE
 
► Check if the CI module is inserted into the PCMCIA card slot 
in the right direction. If the module is not inserted properly, 
this can cause damage to the TV and the PCMCIA card slot.
1Insert the CI Module to PCMCIA (Personal 
Computer Memory Card International 
Association)  CARD SLOT of TV as shown.
  For further information, see p.48.
    
Check this point as 
shown and insert the CI 
Module. 
(Except for 50/60PK5 **, 50/60PK7
***, 50/60PK9
***, 50/60PX9
***, 42/47LX6
***, 
47/55LX9 ***)
 
						

							10
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, \
connect the OPTICAL 
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 
  CAUTION
 
►   Do not look into the optical output port. Looking at the laser 
beam may damage your vision.
1Connect one end of an optical cable to the TV 
Digital Audio  (
Optical )
 Output port.
2  Connect the other end of the optical cable to 
the digital audio  (
Optical )
 input on the audio 
equipment.
3Set the “TV Speaker option - Off ” in the 
AUDIO menu.( ►p.159). Refer to the external 
audio equipment instruction manual for opera-
tion.
    1
2
 
						

							11
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT WIRELESS CONNECTION 
(Except for 32/37/42LD4***)
LG TVs with a Wireless Control port support the LG Wireless Media Box, whic\
h is sold
separately. When you connect the Wireless Ready Dongle (included with the Wireles\
s Media Box) to the 
TV, external devices can be connected to the LG Wireless Media Box and vid\
eo and audio will be sent to 
the TV wirelessly.
After the wireless is connected, press the INPUT button to view the wireless input screen.
Refer to the Wireless Media Box manual for operating instructions.
LG Wireless Media Box
NOTE
 
► WIRELESS CONTROL  : Wireless Ready Dongle power supply and control usage.
 
► HDMI  : Video/Audio signal is connected in Wireless Ready Dongle.
 
► When you connect to the Wireless Media Box (Separately sold product), \
you can watch the 
external device connected to the Wireless Media Box through wireless con\
nection.
 
► When using the external device connected to the Wireless Media Box, some\
 functions of the TV 
menu may not work.
 
► In wireless external output, Real Cinema and Digital Noise Reduction fun\
ctions are not supported.
1Connect the WIRELESS CONTROL  jack of the 
Wireless Ready Dongle to the  WIRELESS
CONTROL jack on the TV.
2Connect  HDMI OUT jack of the Wireless 
Ready Dongle to the  HDMI/DVI IN 1(DVI), 
HDMI/DVI IN 2,  HDMI/DVI IN 3 or HDMI IN 4 
(Except for 32/37/42LD4 ***, 
32/37/42/47/55LD6 ***, 32/42/47LD7
***, 
32/37/42LD8 ***) jack on the TV.
    
 
						

							12
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPLAY RESOLUTION
RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode
Plasma TV Models
ResolutionHorizontal 
Frequency  (kHz) Vertical 
Frequency (Hz)
720x400 31.468 70.08
640x480
 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC) 66.587

59.93
1920x1080 (HDMI-PC) 67.5
60.00
ResolutionHorizontal 
Frequency  (kHz) Vertical 
Frequency (Hz)
720x480 31.469
31.5 59.94
60
720x576

31.25 50
1280x720 37.5
44.96 45 50
59.94 60
1920x1080 33.72
33.75
28.125 26.97 27
33.716 33.75
56.25
67.4367.5 59.94
60
50
23.97 24
29.976 30.00 50
59.94 60
 
						

							13
EXTERNAL EQUIPMENT SETUP
RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode
LCD TV Models / LED LCD TV Models
ResolutionHorizontal 
Frequency  (kHz) Vertical 
Frequency (Hz)
720x400 31.468 70.08
640x480
 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC) 66.587

59.93
1920x1080 (HDMI-PC) 67.5
60.00
ResolutionHorizontal 
Frequency  (kHz) Vertical 
Frequency (Hz)
720x480 31.469
31.5 59.94
60
720x576

31.25 50
1280x720 37.5
44.96 45 50
59.94 60
1920x1080 33.72
33.75
28.125 26.97 27
33.716 33.75
56.25
67.4367.5 59.94
60
50
23.97 24
29.976 30.00 50
59.94 60
 
						

							14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
NOTE
 
► Avoid keeping a fixed image on the set’s screen 
for  prolonged periods of time. The fixed image 
may become permanently imprinted on the 
screen; use a screen saver when possible.
 
► There may be interference relating to resolution, 
vertical pattern, contrast or brightness in PC 
mode. Change the PC mode to another resolution 
or change the refresh rate to another rate or 
adjust the brightness and contrast on the menu 
until the picture is clear. If the refresh rate of the 
PC graphic card can not be changed, change the 
PC graphic card or consult the manufacturer of 
the PC graphic card.
 
► The synchronization input waveform for Horizontal 
and Vertical frequencies are separate.
 
► We recommend using  1920x1080, 60 Hz for the 
PC mode, this should provide the best picture 
quality

.
 
► Connect the signal cable from the monitor output 
port of the PC to the RGB (PC) port of the TV or 
the signal cable from the HDMI output port of the 
PC to the HDMI IN (or HDMI/DVI IN) port on the 
TV.  
► Connect the audio cable from the PC to the Audio 
input on the TV. (Audio cables are not included with 
the TV).
 
► If using a sound card, adjust PC sound as required.
 
► If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect only 
one of either RGB or HDMI IN (or HDMI/DVI IN) to 
display the PC output on the TV.
 
► If the graphic card on the PC does output analogue 
and digital RGB simultaneously, set the TV to either 
RGB or HDMI; (the other mode is set to Plug and 
Play automatically by the TV.)
 
► DOS mode may not work depending on the video 
card if you use an HDMI to DVI cable.
 
► If you use too long an RGB-PC cable, there may be 
interference on the screen.  We recommend using 
under 5m of cable. 
This provides the best picture 
quality.
 
						

							15
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Reset.
4
Select  Ye s.
5Run  Reset .
To Set
Auto Config.
SCREENMove
Prev.
Resolution
Position
Size
Phase
Reset
Ye s
No
OK
Move PICTURE
 ShShSh•Sh•Sh•ShShSh Sharpnarpnarpnarpnarpnarpnarpnppessessessessessessess 707070707070707070 • 
Colour 60
 •  Tint 0
  • Colour Temp.  0
 •  Advanced Control
 
 • Picture Reset
• TruMotion  : Off
• Screen
RGW C
• Screen►
 
						

							16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability.  After adjustment, if the 
image is still not correct, your 
TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, \
and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in pr\
ogress.
Auto Configure (RGB [PC] mode only)
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK  button to move to the previous menu screen.
•   If the position of the image is still not correct, 
try 
Auto adjustment again.
•   
If picture needs to be adjusted again after 
Auto adjustment in RGB (PC), you can adjust 
the  Position , Size  or Phase.
1 Select PICTURE.
2Select  Screen.
3Select Auto Config. .
4
Select Ye s.
5Run  Auto Config. .
Auto Config.
Auto Config.
SCREENMove
Prev.
Resolution
Position
Size
Phase
Reset
Ye s
No
OK
Move PICTURE
 ShShSh•Sh•Sh•Sh•ShSh Sharpnarpnarpnarpnarpnarpnarpnppessessessessessessess 707070707070707070 • 
Colour 60
 •  Tint 0
  • Colour Temp.  0
 •  Advanced Control
 
 • Picture Reset
• TruMotion  : Off
• Screen
RGW C
• Screen►