LG 55g2 Owners Manual

2\b
ENGENGLISH
Installation
Setting up the TV
Put	your	TV	on	a	pedestal	stand	and	mount	the	TV	on	a	table	or	wall.
Attaching the stand
3
2
4
5
 C AUTION
y
y When	attaching	the	stand	to	the	TV	
set,	place	the	screen	facing	down	on	a	
cushioned	table	or	flat	surface	to	protect	
the	screen	from	scratches.
y
y Tighten	the	screws	firmly	to	prevent	
the	TV	from	tilting	forward.	Do	not	over	
tighten.
1
Front
M4	x	20 4
	EA
Stand Body
Stand Base
Top View
Protection	pad	
(Depending	on	model)
M4	x	20
4EA
Wrapping...

22
ENGENGLISH
Installation
Mounting on a table
1	 Lift	and	tilt	the	TV	into	its	upright	position	on	a	table.
-	 Leave 	a 	10 	cm 	(4 	inch) 	(minimum) 	space 	from	
the	wall	for	proper	ventilation.
10 cm
10 cm
10 cm (4 inches)
10 cm
2	 Connect	the	power	cord	to	a	wall	outlet.
y
y Do	not	place	the	TV	near	or	on	sources	
of	heat,	as	this	may	result	in	fire	or	other	
damage.
 CAUTION
Adjusting the angle of the TV to suit view
Swivel	10±2	degrees	to	the	left	or	right	and	adjust	
the	angle	of	the	TV	to	suit...

23
ENGENGLISH
Installation
Mounting on a wall
Attach	an	optional	wall	mount	bracket	at	the	rear	
of	the	TV	carefully	and	install	the	wall	mount	
bracket	on	a	solid	wall	perpendicular	to	the	
floor.	When	you	attach	the	TV	to	other	building	
materials,	please	contact	qualified	personnel.
We	recommend	that	you	use	an	LG	brand	wall	
mount	when	mounting	the	TV	to	a	wall.
10 cm
10 cm
10 cm (4 inches)
10 cm
Make	sure	to	use	screws	and	wall	mounts	that	
meet	the	VESA	standard.	Standard	dimensions	for	
the	wall...

24
ENGENGLISH
Installation
Tidying cables
1	 Gather	and	bind	the	cables	with	the	cable	holder.
Cable holder
2	 Fix	the	cable	management	clip	firmly	to	the	TV.
Cable management c\
lip
y
y Do	not	move	the	TV	by	holding	the	cable	
holder	and	cable	management	clip,	as	the	
cable	holders	may	break,	and	injuries	and	
damage	to	the	TV	may	occur.
 CAUTION
  

25
ENGENGLISH
Connections
CONNECtIONS
Connect	various	external	devices	to	the	TV	and	switch	input	modes	to	select	an	external	device.	For	more	
information	on	an	external	device’s	connection,	refer	to	the	manual	provided	with	each	device.
Available	external	devices	are:	HD	receivers,	DVD	players,	VCRs,	audio	systems,	USB	storage	devices,	PC,	
gaming	devices,	and	other	external	devices.
y
y If	you	record	a	TV	program	on	a	DVD	recorder	or	VCR,	make	sure	to	connect	the	TV	signal	input	
cable	to	the	TV...

26
ENGENGLISH
Connections
Network connection
Connect	the	TV	to	a	router	with	a	LAN	cable.	Or,	connect	with	Wi-Fi	by	accessing	Network	Setup	in	the	
initial	Setup	Wizard.	For	seamless	internet	streaming	LG	recommends	a	stable	4	Mbps	broadband	speed	
and	1.5	Mbps	as	a	minimum.
Wireless Network Connection
Wired Network Connection
Internet	connection
Wired	router
wireless	router
  

2\f
ENGENGLISH
Connections
Connection Overview
Connect	various	external	devices	to	the	ports	on	the	TV	back	panel.
1	 Find	an	external	device	you	want	to	connect	to	your	TV	as	shown	on	the	following	illustration.
2	 Check	the	connection	type	of	the	external	device.
3	 Go	to	the	appropriate	illustration	and	check	the	connection	details.
HD Receive r DVD VCR
Speaker USB
PC Ga\fing device
   

28
ENGENGLISH
Connections
Connecting to a HD receiver, DVD, or VCR player
Connect	a	HD	receiver,	DVD,	or	VCR	player	to	the	TV	and	select	an	appropriate	input	mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits	the 	digital 	video 	and 	audio 	signals 	from 	an 	external 	device 	to 	the 	TV. 	Connect 	the 	external 	device	
and	the	TV	with	the	HDMI	cable	as	shown	in	the	following	illustration.
HDMI
 2  3
 1  4 
/ DVI INDVD/ Blu-Ray / HD Cabl\Te Bo
x / HD STB
C\foose any HDM\b...

29
ENGENGLISH
Connections
DVI to HDMI Connection
Transmits	the	digital	video	signal	from	an	external	device	to	the	TV.	Connect	the	external	device	and	the	
TV	with	the	DVI-HDMI	cable	as	shown	in	the	following	illustration.	To	transmit	an	audio	signal,	connect	an	
audio	cable.
(RGB/HDMI-PC)AUDIO(RGB/DVI)AUDIO
 2  3
 1  4 
/ DVI INAUDIO OUTDVI OUT
(*Not Pr
ovided)
(*Not Pr ovided)
DVD/ Blu\fRay / \bD Cable B\uo x
   

30
ENGENGLISH
Connections
Component Connection
Transmits	the	analog	video	and	audio	signals	from	an	external	device	to	the	TV.	Connect	the	external	
device	and	the	TV	with	the	component	cable	as	shown	in	the	following	illustration.y
y If	cables	are	installed	incorrectly,	it	could	cause	the	image	to	display	in	black	and	white	or	with	
distorted	color.
y
y Check to ensure each cable is matched with the corresponding color connection.
 NOTE
VIDEOAUDIO
L
R
DVD/ Blu-Ray / HD Cabl\Ue Bo x
(U\fe the co\bponent...