LG 52ld550 Owners Manual

13
EXTERNAL  EQUIPMENT  SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Reset.
4
Select Yes.
5Run Reset.
To Set
Auto Config.
SCREENMovePrev.
Resolution
Position
Size
Phase
Reset
YesNo
OKMove PICTURE
 • Sharpness  70  • Colour   60...

14
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the 
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
• Press the MENU/EXIT...

15
EXTERNAL  EQUIPMENT  SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Resolution.
4Select the desired resolution.
5
Auto Config.
SCREENMovePrev.
Resolution
Position
Size
Phase
Reset
OKMove PICTURE
 • Sharpness  70  • Colour   60...

16
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust 
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Position, Size or Phase.
4 Make appropriate...

17
WATCHING  TV  /  PROGRAMME  CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP 
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT
PROGRAMME SELECTION
1If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can 
adjust the Language, Mode Setting, Power Indicator(When you select Home Use from 
Mode Setting - Only LED LCD TV MODELS), Country or TimeZone (When Russia is select-
ed for Country) or Set Password(When...

18
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
  Aspect Ratio: Selects your desired picture for-
mat.
   For Zoom Setting, select 14:9, Zoom and 
Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to 
Q.Menu.
 Clear Voice II : By differentiating the human 
sound range from others, it helps users lis-
ten to human voices better.
 Picture Mode : Selects your desired Picture 
Mode.
 Sound Mode : It is a feature to automatical-
ly set the sound...

19
WATCHING  TV  /  PROGRAMME  CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
OKMove
● Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
• Press the RED button, you can check the 
Customer Support menu.
• Press the GREEN button, you can check 
the Simple Manual menu.
• Press the MENU/EXIT button to return to 
normal TV viewing.
• Press the BACK button to move to the pre-
vious menu screen.
NOTE...

20
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
AUTO PROGRAMME TUNING 
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1,000. But the number may differ slightly 
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable. 
If you want to select the Antenna,
•...

21
WATCHING  TV  /  PROGRAMME  CONTROL
If you want to select the Cable,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP.
2Select Auto Tuning.
3
Select Cable.
4Select Comhem or Other 
Operators.
5
Select Quick or Full.
OKMove
● Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OKMove
● ● Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting...

22
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
 ■When you select the Quick,
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network  : Auto
OK
Close
Setting
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network  : Auto
OK
Close
Setting
•  If you wish to keep on auto tuning, select 
Start using the        button. Then, press 
the OK button. Otherwise select Close. 
• Automatic Numbering: Decide whether 
to use the programme numbers as sent 
by...