LG 50pm1m Owners Manual
Have a look at the manual LG 50pm1m Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Owner’s Manual 21 Sound Adjustment 1.Press the MENUbutton and then use D D / E Ebutton to select the SOUNDmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select the desired sound option (Balance,Treble,Bass). 3. Press the G Gbutton and then use F F / G Gbutton to make appropriate adjustments. 4. Press the ENTERbutton to save. - You can adjust sound options Balance, Treble, and Bass to the levels you prefer. - AVL maintains an equal sound level; even if you change channels. 1. Press the MENUbutton and then use D D / E Ebutton to select the SOUNDmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select AV L. 3. Press the G Gbutton and then use D D / E Ebutton to select OnorOff. 4. Press the ENTERbutton to save. 1.Press the MENUbutton and then use D D / E Ebutton to select the SOUNDmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select TV speaker. 3. Press the G Gbutton and then use D D / E Ebutton to select OnorOff. 4. Press the ENTERbutton to save. - You can adjust internal speaker status. - If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. SOUND Prev. DASP BBE AV L G GBalance 0 Treble 50 Bass 50 TV speaker SOUND MENU On Off SOUND Prev. DASP BBE AV L Balance 0 G GTreble 50 Bass 50 TV speaker SOUND MENU LR SOUND Prev. DASP BBE AV L Balance 0 Treble 50 Bass 50 TV speaker G G SOUND MENU On Off A A VL VL (Auto V (Auto V olume Leveler) olume Leveler) Manual Sound Control ( Manual Sound Control (DASP DASP Off Offoption and balance) option and balance) TV speaker Setup TV speaker Setup U514Aen 98/2/18 4:26 AM Page 21
22 Plasma Monitor Time Setting - Timer function operates only if current time has been set. - Off-Timer function overrides On-Timer function if they are set both set to the same time. - The Monitor must be in standby mode for the On-Timer to work. 1. Press the MENUbutton and then use D D / E Ebutton to select the TIMERmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Off timeror On timer. 3. Press the G Gbutton and then use D D / E Ebutton to selectOn. • To cancel On/Off timerfunction, select Off. 4. Press the G Gbutton and then use D D / E Ebutton to set the hour. 5. Press the G Gbutton and then use D D / E Ebutton to set the minutes. 6.For only On timerfunction Press the G Gbutton and then use D D / E Ebutton to set sound level. 7. Press the ENTERbutton to save. - If current time setting is wrong, reset the clock manually. 1. Press the MENUbutton and then use D D / E Ebutton to select the TIMERmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Clock. 3. Press the G Gbutton and then use D D / E Ebutton to set the hour. 4. Press the G Gbutton and then use D D / E Ebutton to set the minutes. 5. Press the ENTERbutton to save. TIMER Prev. ClockG GOff timer On timer Auto off TIMER MENU - - : - -AM TIMER Prev. Clock Off timer On timer G GAuto off TIMER MENU10 : 30 Volume 30 AM On Off Time Setting Clock Setup Clock Setup On/Off T On/Off T imer Setup imer Setup U514Aen 98/2/18 4:26 AM Page 22
Owner’s Manual 23 Time Setting - If set to on and there is no input signal, the Monitor turns off automatically after 10 minutes. 1. Press the MENUbutton and then use D D / E Ebutton to select the TIMERmenu. 2. Press the G Gbutton and thenuse D D / E Ebutton to select Auto off. 3. Press the G Gbutton and thenuse D D / E Ebutton to select Onor Off. 4. Press the ENTERbutton to save. - The Sleep Timer turns the Monitor off at the preset time. Note that this setting is cleared when the Monitor is turned off. 1. Press the SLEEPbutton repeatedly to select the number of min- utes. First the Offoption appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the ENTERbutton. The timer begins to count down from the number of minutes selected. 3. To check the remaining minutes before the Monitorturns off, press the SLEEPbutton once. 4. To cancel the Sleep Timer, press the SLEEPbutton repeatedly to select Off. TIMER Prev. Clock Off timer On timer Auto off G G TIMER MENU On Off Sleep T Sleep T imer imer Auto Off Auto Off 0APCDASP SPLIT ZOOMSLEEP MEMORY/ERASE/REVIEW/FCR/ A.PROG/ POWER SLEEP U514Aen 98/2/18 4:26 AM Page 23
24 Plasma Monitor Special Features - The Monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by locking out the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the Monitor off. 1. Press the MENUbutton and then use D D / E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Key lock. 3. Press the G Gbutton and then use D D / E Ebutton to selectOnor Off. 4. Press the ENTERbutton to save. • With the Key lock On, the display ‘ Key lock’appears on the screen if any button on the front panel is pressed.W - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the Monitors screen for a long period of time. 1. Press the MENUbutton and then use D D / E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select ISM Method. 3. Press the G Gbutton and then use D D / E Ebutton to select eitherNormal, White wash, Orbiteror Inversion. • NormalIf image sticking is never a problem, ISM is not necessary - set to Normal. • White washWhite Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press any button. • OrbiterOrbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move every 2 minutes: Right →Right → Left →Left → Downside →Downside →Upside →Upside → Left →Left →Right →Right →Upside →Upside →Downside →Downside. • InversionInversion will automatically invert the Monitor panel color every 30 minutes. 4. Press the ENTERbutton to save. SPECIAL Prev. Input Language Key lock G GISM Method Low power Set ID Caption / Text Demo OSD Rotate SPECIAL MENU On Off SPECIAL Prev. Input Language Key lock ISM Method G GLow power Set ID Caption / Text Demo OSD Rotate SPECIAL MENU Normal White wash Orbiter Inversion Special Features Key Lock Key Lock ISM ISM (Image Sticking Minimization) (Image Sticking Minimization) Method Method U514Aen 98/2/18 4:26 AM Page 24
Owner’s Manual 25 Special Features 1. Press the MENUbutton and then use D D / E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select OSD Rotate. 3. Press the G Gbutton and then use D D / E Ebutton to selectNormalor Rotate. • Normal: If the set is installed horizontally. • Rotate: If the set is installed vertically. 4. Press the ENTERbutton to save. SPECIAL Prev. Input Language Key lock ISM Method Low power Set ID Caption / Text Demo OSD Rotate G G SPECIAL MENU Normal Rotate - Low power reduces the plasma display power consumption. 1. Press the MENUbutton and then use D D / E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Low power. 3. Press the G Gbutton and then use D D / E Ebutton to selectOnor Off. • When you select On, the screen darkens. 4. Press the ENTERbutton to save. 1. Press the MENUbutton and then use D D / E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Demo. 3. Press the G Gbutton to begin XD Demo. 4. Press the EXITbutton to stop XD Demo. - Use it to see the difference between XD Demo on and XD Demo off. - XD demo is not available for RGB (PC) and HDMI (PC) sources. SPECIAL Prev. Input Language Key lock ISM Method Low power G GSet ID Caption / Text Demo OSD Rotate SPECIAL MENU On Off SPECIAL Prev. Input Language Key lock ISM Method Low power Set ID Caption / Text Demo G GOSD Rotate SPECIAL MENU To start Low Power Low Power XD Demo XD Demo OSD Rotate OSD Rotate U514Aen 98/2/18 4:26 AM Page 25
26 Plasma Monitor Screen Adjustment - If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase manually. - To correct the screen size, adjust Clock. - Phase, Clock, H-position, V-position function works in the following mode : RGB-PC. - Only H-position, V-position function works in the following mode :RGB-DTV, COMPONENT (480p, 720p,1080i), HDMI- DTV (480p, 720p,1080i) mode. 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and thenuse D D / E Ebutton to select Manual config.. 3. Press the G Gbutton and then use D D / E Ebutton to to select Phase,Clock,H-Positionor V-Position. 4. Use the F F / G Gbutton to make appropriate adjustments. • The Phaseadjustment range is 0 ~ 63. • The Clockadjustment range is -20 ~ +50. 5. Press the ENTERbutton to save. - RGB (PC) mode only; This function doesn’t work for RGB (DTV) mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. - The Auto config.and Manual config.are not active in HDMI mode. 1. Press the MENUbutton and then use D D /E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and thenuse D D /E Ebutton to select Auto config.. 3. Press the G Gbutton to run Auto configure. • When Auto config.has finished, OKwill be seen on the screen. • If the position of the image is still not correct, try Auto adjustment again. 4. In RGB (PC) mode, if the image needs to be adjusted more after using Auto config., you can make further adjustments with the Manual config.option. - Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible. - Set every aspect ratio for Video, Component 480i sources. - Use 4:3 or 16:9 for other RGB(PC), HDMI(PC) sources. - Horizon is not available for RGB (DTV), HDMI (DTV), and Component (DTV) sources. 1. Press the ARCbutton repeatedly to select the desired picture format. You can also adjust ARCin the SCREENmenu. • 4:3Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. • 16:9Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. • HorizonChoose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. • Zoom- Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. SCREEN Prev. Auto config. G GManual config. VGA Mode ARC Zoom +/- Position Cinema NR Reset SCREEN MENU To set SCREEN Prev. Auto config. Manual config.G GVGA Mode ARC Zoom +/- Position Cinema NR Reset SCREEN MENU Phase 0 Clock 0 H-position 0 V-position 0 Screen Adjustment Auto Auto Adjustment Adjustment Setting Picture Format Setting Picture Format Manual Configure Manual Configure U514Aen 98/2/18 4:26 AM Page 26
Owner’s Manual 27 Screen Adjustment - To see a normal picture, match the resolution of RGB VGA/XGA mode (640x480, 848x480, 852x480 / 1024x768, 1280x768, 1360x768, 1366x768) with the selection for VGA/XGA mode in the SCREENmenu. - 42PM3MV model is only available in VGA mode. 1. Press the MENUbutton and then use D D /E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and thenuse D D /E Ebutton to select VGA Mode (or XGA Mode). 3. Press the G Gbutton and then use D D /E Ebutton to select the desired VGA/XGA res- olution. 4. Press the ENTERbutton to save. SCREEN Prev. Auto config. Manual config. VGA Mode G GARC Zoom +/- Position Cinema NR Reset SCREEN MENU 640x480 848x480 852x480 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Position. 3. Press the G Gbutton and then use D D / E E / F F / G G button to adjust the position. 4. Press the ENTERbutton to save. - You are available to this function after adjusting Zoom +/-. - When enlarging or reducing the picture, the screen may display an incorrect picture. 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Zoom+/-. 3. Press the G Gbutton and then use D D / E E / F F / G G button to adjust the position. 4. Press the ENTERbutton to save. SCREEN Prev. Auto config. Manual config. VGA Mode ARC Zoom +/- Position G GCinema NR Reset SCREEN MENU D D F F G G E E SCREEN Prev. Auto config. Manual config. VGA Mode ARC Zoom +/- G GPosition Cinema NR Reset SCREEN MENU F FG G Selecting VGA/XGA Selecting VGA/XGA Mode Mode (RGB mode only) (RGB mode only) Picture size Zoom Picture size Zoom Screen Position Screen Position 105 % - Sets up the set for the best picture appearance for viewing movies. - This function works in the following mode: Video or COMPONENT (480i). 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select Cinema.. 3. Press the G Gbutton and then use D D / E Ebutton to selectOnor Off. 4. Press the ENTERbutton to save. SCREEN Prev. Auto config. Manual config. VGA Mode ARC Zoom +/- Position Cinema G GNR Reset SCREEN MENU On Off Cinema Mode Setup Cinema Mode Setup (V (V ideo and Component 480i mode only) ideo and Component 480i mode only) U514Aen 98/2/18 4:26 AM Page 27
28 Plasma Monitor Screen Adjustment - You can select 3D NRor MPEG NRto reduce the picture noise which may appear on the screen while watching the set. 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and then use D D / E Ebutton to select NR. 3. Press the G Gbutton and then use D D / E Ebutton to select3D NRor MPEG NR. 4. Press the F F/ G Gbutton to make appropriate adjustments. 5. Press the ENTERbutton to save. SCREEN Prev. Auto config. Manual config. VGA Mode ARC Zoom +/- Position Cinema NR G GReset SCREEN MENU 3D NR 0 MPEG NR 0 - Enlarges the picture in correct proportions. - Split Zoom can be used for all input sources. - In 2-Split Zoom mode, you can only move the image up or down. - If an image is enlarged, a section can be viewed without using Split Zoom. 1. Press the SPLIT ZOOMbutton repeatedly to select either 2, 4, or 9 Split Zoom. 2. Press the number button corresponding to the section you wish to enlarge. Youcan move within the enlarged pic- tureusing the D D / E E / F F / G Gbutton. To return to normal viewing, press the SPLIT ZOOMbutton again. Example of choosing 5.Section 5 is enlarged to fill the screen. 1 42-Split zoom1 42 54-Split zoom123 456 7899-Split zoom 123 456 7899-Split zoom 1. Press the MENUbutton and then use D D / E Ebutton to select the SCREENmenu. 2. Press the G Gbutton and thenuse D D / E Ebutton to select Reset. 3. Press the G Gbutton. - Reset is unique to each function: Position, Zoom +/-. - Use the Reset option to initialize the adjusted settings. SCREEN Prev. Auto config. Manual config. VGA Mode ARC Zoom +/- Position Cinema NR Reset G G SCREEN MENUTo set Screen Adjustment Initializing (Reset to original factory value) Initializing (Reset to original factory value) Split Zoom Split Zoom NR (Noise Reduction) NR (Noise Reduction) U514Aen 98/2/18 4:26 AM Page 28
Owner’s Manual 29 Lock Adjustment Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the cat- egories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies : • TV-G (General audience) • TV-PG (Parental guidance suggested) • TV-14 (Parents strongly cautioned) • TV-MA (Mature audience only) • TV-Y (All children) • TV-Y7 (Children 7 years older) Lock Adjustment 1. After inputting the password, use the D D /E Ebutton to choose Lock System. 2. Press the G G button and then use the D D /E E to select On orOff. • When you select , the Lock System is enable. 3. Press the ENTERbutton to save. - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. Setting Up Setting Up Y Y our Password our Password Enables or disables the blocking scheme you set up previously. Lock System Lock System 1. Press the MENUbutton and then use the D D / E Ebutton to select the LOCKmenu. Then, press the G Gbutton. • Enter the password as requested. • The TV is set up with the initial password “0-0-0-0”. LOCK Prev. Lock on/off G GSet password MPAA Age block Content block Aux. block LOCK MENU On Off Password : **** U514Aen 98/2/18 4:26 AM Page 29
30 Plasma Monitor Lock Adjustment Set Password Set Password Change the password by inputting a new password twice. 1. After inputting the password, use the D D /E Ebutton to choose Set password. 2. Press the G G button and then choose any 4 digits for your new password and enter the them on the new. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Then your changed password has been memorized. 3. Press the ENTERbutton to save. LOCK Prev. Lock on/off Set passwordG GMPAA Age block Content block Aux. block LOCK MENU New Confirm **** **** MP MP AA AA (Movie Rating) (Movie Rating) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. 1. After inputting the password, use the D D /E Ebutton to choose MPAA. 2. Press the G G button and then use the D D /E E to select G&above,PG&above, PG-13&above,R&above,NC-17&above,orX. • Unblocked (Permits all programs) • G&above (General audience) • PG&above (Parental guidance suggested) • PG-13&above (Parents strongly cautioned) • R&above (Restricted) • NC-17&above (No one 17 and under admitted) • X (Adult only) 3. Press the ENTERbutton to save. If you set PG-13&above : G&above and PG&above movies will be available , PG-13&above, R&above, NC-17&above and X will be blocked. LOCK Prev. Lock on/off Set password MPAA G GAge block Content block Aux. block LOCK MENU G&above PG&above PG-13&above R&above NC-17&above X Unblocked U514Aen 98/2/18 4:26 AM Page 30