LG 50pm1m Owners Manual
Here you can view all the pages of manual LG 50pm1m Owners Manual. The LG manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 31
Owner’s Manual 31 Lock Adjustment Age block Age block LOCK Prev. Lock on/off Set password MPAA Age block G GContent block Aux. block LOCK MENU General Children General • Based on the ratings, blocks certain monitor programs that you and your family do not want to view. • TV-G &above (General audience) • TV-PG&above (Parental guidance suggested) • TV-14&above (Parents strongly cautioned) • TV-MA (Mature audience only) Children • Prevents children from watching certain childrens monitor programs,...
Page 32
32 Plasma Monitor Lock Adjustment Aux. block Aux. block LOCK Prev. Lock on/off Set password MPAA Age block Content block Aux. block G G LOCK MENU Enables you to select a source to block from the external source devices you have hooked up. 1. After inputting the password, use the D D /E Ebutton to choose Aux. block. 2. Press the G G button and then use the D D /E E to select a source. 3. Press the G G button and then use the D D /E E to select RGB, HDMI,Component 1 ,Component...
Page 33
Owner’s Manual 33 External Control Device Setup RS-232C INPUT(CONTROL/SERVICE) AUDIO AUDIO LR REMOTE CONTROL AUDIO INPUTRGB INPUTVARIABLE ARIABLE AUDIO OUTAUDIO OUT HDMI/ DVI(VIDEO) RGB OUTPUT AUDIO VIDEORL No. Pin name 1 No connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection1 5 6 9 2 3 5 4 6 7 8RXD TXD GND DTR DSR RTS CTSTXD RXD GND DSR DTR CTS RTS PC 7-Wire Configurations (Standard...
Page 34
34 Plasma Monitor External Control Device Setup Set ID Set ID - Use this function to specify a Monitor ID number. - Refer to ‘Real Data Mapping 1’. See page 35. 1. Press the MENUbutton and then use D D /E Ebutton to select the SPECIALmenu. 2. Press the G Gbutton and thenuse D D /E Ebutton to select Set ID. 3. Press the G Gbutton and then use F / Gbutton to adjust Set IDto choose the desired Monitor ID number. The adjustment range of Set IDis 1 ~ 99. 4. Press the ENTERbutton to save. T...
Page 35
![Page 35
Owner’s Manual 35
External Control Device Setup
03. Aspect Ratio (Command 2 : c) (Main Picture Size)
GTo adjust the screen format.(Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
SCREEN menu.
T
ransmission
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon
4 : Zoom
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3 screen
aspect ratio. [c][ ][Set ID][...](http://img.usermanuals.tech/thumb/47/54010/w300_lg_50pm1m-owner-s-manual-34.png "Page 35
Owner’s Manual 35
External Control Device Setup
03. Aspect Ratio (Command 2 : c) (Main Picture Size)
GTo adjust the screen format.(Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
SCREEN menu.
T
ransmission
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon
4 : Zoom
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3 screen
aspect ratio. [c][ ][Set ID][...")
Owner’s Manual 35 External Control Device Setup 03. Aspect Ratio (Command 2 : c) (Main Picture Size) GTo adjust the screen format.(Main picture format) You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the SCREEN menu. T ransmission Data 1 : Normal screen (4:3) 2 : Wide screen (16:9) 3 : Horizon 4 : Zoom [k][c][ ][Set ID][ ][Data][Cr] Ack * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. [c][ ][Set ID][...
Page 36
![Page 36
36 Plasma Monitor
External Control Device Setup
07. Contrast (Command 2 : g)
GTo adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
T
ransmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 35.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command 2 : h)
GTo adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
T
ransmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 35....](http://img.usermanuals.tech/thumb/47/54010/w300_lg_50pm1m-owner-s-manual-35.png "Page 36
36 Plasma Monitor
External Control Device Setup
07. Contrast (Command 2 : g)
GTo adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
T
ransmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 35.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command 2 : h)
GTo adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
T
ransmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 35....")
36 Plasma Monitor External Control Device Setup 07. Contrast (Command 2 : g) GTo adjust screen contrast. You can also adjust contrast in the PICTURE menu. T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 35. [k][g][ ][Set ID][ ][Data][Cr] Ack [g][ ][Set ID][ ][OK][Data][x] 08. Brightness (Command 2 : h) GTo adjust screen brightness. You can also adjust brightness in the PICTURE menu. T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 35....
Page 37
![Page 37
Owner’s Manual 37
External Control Device Setup
20. Green Adjustment (Command 2 : w)
GTo adjust green in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 36.
[k][w][ ][Set ID][ ][Data][Cr]
Ack
[w][ ][Set ID][ ][OK][Data][x]
21. Blue Adjustment (Command 2 : $)
GTo adjust blue in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 36.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][...](http://img.usermanuals.tech/thumb/47/54010/w300_lg_50pm1m-owner-s-manual-36.png "Page 37
Owner’s Manual 37
External Control Device Setup
20. Green Adjustment (Command 2 : w)
GTo adjust green in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 36.
[k][w][ ][Set ID][ ][Data][Cr]
Ack
[w][ ][Set ID][ ][OK][Data][x]
21. Blue Adjustment (Command 2 : $)
GTo adjust blue in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 36.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][...")
Owner’s Manual 37 External Control Device Setup 20. Green Adjustment (Command 2 : w) GTo adjust green in color temperature. T ransmission Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 36. [k][w][ ][Set ID][ ][Data][Cr] Ack [w][ ][Set ID][ ][OK][Data][x] 21. Blue Adjustment (Command 2 : $) GTo adjust blue in color temperature. T ransmission Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 36. [k][$][ ][Set ID][ ][Data][Cr] Ack [$][ ][Set ID][...
Page 38
![Page 38
38 Plasma Monitor
External Control Device Setup
23. ISM Method
(Command 1 : j, Command 2 : p)
GTo control the ISM method. You can also adjust ISM
Method in SPECIAL menu.
T
ransmission
Data 8 : Normal Mode
4 : White Wash2 : Orbiter
1 : Inversion
[j][p][ ][Set ID][ ][Data][Cr]
Ack
[p][ ][Set ID][ ][OK][Data][x]
24. Low Power
(Command 1 : j, Command 2 : q)
GTo reduce the power consumption of the monitor. You
can also adjust Low Power in SPECIAL menu.
T
ransmission
Data 0 : Off
1 : On
[j][q][ ][Set...](http://img.usermanuals.tech/thumb/47/54010/w300_lg_50pm1m-owner-s-manual-37.png "Page 38
38 Plasma Monitor
External Control Device Setup
23. ISM Method
(Command 1 : j, Command 2 : p)
GTo control the ISM method. You can also adjust ISM
Method in SPECIAL menu.
T
ransmission
Data 8 : Normal Mode
4 : White Wash2 : Orbiter
1 : Inversion
[j][p][ ][Set ID][ ][Data][Cr]
Ack
[p][ ][Set ID][ ][OK][Data][x]
24. Low Power
(Command 1 : j, Command 2 : q)
GTo reduce the power consumption of the monitor. You
can also adjust Low Power in SPECIAL menu.
T
ransmission
Data 0 : Off
1 : On
[j][q][ ][Set...")
38 Plasma Monitor External Control Device Setup 23. ISM Method (Command 1 : j, Command 2 : p) GTo control the ISM method. You can also adjust ISM Method in SPECIAL menu. T ransmission Data 8 : Normal Mode 4 : White Wash2 : Orbiter 1 : Inversion [j][p][ ][Set ID][ ][Data][Cr] Ack [p][ ][Set ID][ ][OK][Data][x] 24. Low Power (Command 1 : j, Command 2 : q) GTo reduce the power consumption of the monitor. You can also adjust Low Power in SPECIAL menu. T ransmission Data 0 : Off 1 : On [j][q][ ][Set...
Page 39
Owner’s Manual 39 IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead codeHigh custom codeData codeData code T C Tf T1 C0Carrier frequency F CAR= 1/TC= fOSC/12 Duty ratio = T1/TC= 1/3 • Repeat frame C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7 Repeat code 9 ms4.5 ms 0.55 ms 9 ms 2.25 ms G Bit description G Frame interval : Tf The waveform is transmitted as long as a key...
Page 40
40 Plasma Monitor IR Codes Code (Hexa) Function Note 0001020308C4C5095B10111213141516171819980B5ABFD4C6,CED50E43444D525D5C797677AF 99R/C Button R/C Button R/C Button R/C Button R/C Button (Power On/Off) Discrete IR Code (Only Power On) Discrete IR Code (Only Power Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code (Input VIDEO Selection) Discrete IR Code (Input COMPONENT1...