LG 50pk550 Owners Manual

							11
PREPARATION
50/60PK250, 42/50PJ250, 60PK280, 60PK290
CHVOLENTER
CHVOLENTER
CHCHVOLVOLENTERENTER
POWER
ButtonINPUT
ButtonMENU
ButtonENTER
ButtonVOLUME
Buttons
Power/Standby Indicator
Illuminates red in standby
mode.
The LED is off while the TV
remains on.
Intelligent Sensor
Adjusts picture according to
the surrounding conditions. 
CHANNEL
Buttons
Remote
Control
Sensor 
You can operate the button just by touching the button lightly with your finger.
’ownloadedm&rommTV)ManualPcommManuals 
						

							PREPARATION
12
PREPARATION
CHVOLENTER
CHVOLENTER
CHCHVOLVOLENTERENTER
POWER
ButtonINPUT
ButtonMENU
ButtonENTER
ButtonVOLUME
Buttons
Power/Standby Indicator
Illuminates red in standby
mode.
The LED is off while the TV
remains on.
42/50PJ350, 42/50PJ340, 50PK340, 50PK350, 42/50PJ350C
Intelligent Sensor
Adjusts picture according to
the surrounding conditions. 
CHANNEL
Buttons
G Do not step on the glass stand or subject it to any impact.It may break, causing possible injury from fragments of
glass, or the TV may fall.
G Do not drag the TV. The floor or the product may be damaged.
Remote
Control
Sensor 
You can operate the button just by touching the button lightly with your finger.
’ownloadedm&rommTV)ManualPcommManuals 
						

							PREPARATION
13
Image shown may differ from your TV.
BACK PANEL INFORMATION
AV IN 2
L / MONO
R
AUDIO
VIDEO
SERVICE
ONLY  HDMI IN 3
7
1
9
R
ANTENNA
/CABLE
 INHDMI/DVI IN  2
1
RGB IN (PC)RS-232C IN(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUTAUDIO IN
(RGB/DVI)
COMPONENT IN
1 2
VIDEOAUDIO
L
R
REMOTECONTROL INAV IN 1
AUDIOVIDEO/MONO1
2
3
457
8
R
R
VARIABLE AUDIO OUT
(            )
10
6
42/50PJ250, 50/60PK250, 60PK280, 42/50PJ340,
50/60PK540, 50PK340
HDMI/DVI IN
Digital Connection. Supports HD video and Digital
audio. Doesn’t support 480i. 
Accepts  DVI  video  using  an  adapter  or  HDMI  to
DVI cable (not included)
OPTICAL DIGITAL AUDIO OUT
Optical digital  audio  output  for  use  with  amps  and
home theater systems. 
Note: In standby mode, this port doesn’t work.
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
AUDIO IN (RGB)
1/8” headphone jack for analog PC audio input.
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).
REMOTE CONTROL IN PORT
For a wired remote control.COMPONENT IN
Analog Connection. Supports HD. 
Uses  a  red,  green,  and  blue  cable  for  video  &  red
and white for audio.
AV (Audio/Video) IN
Analog  composite  connection.Supports  standard
definition video only (480i).
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
SERVICE ONLY
Used for software updates.
Power Cord Socket
For operation with AC power. 
Caution:  Never  attempt  to  operate  the  TV  on  DC
power.1
2
3
4
5
9
10
8
6
7
,ownloadedm!rommTVvManualncommManuals 
						

							PREPARATION
14
PREPARATION
AV IN 2
L / MONO
R
AUDIO
VIDEO
USB IN  HDMI IN 3
7
1
9
R
ANTENNA
/CABLE
 INHDMI/DVI IN  2
1
RGB IN (PC)RS-232C IN(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUTAUDIO IN
(RGB/DVI)
COMPONENT IN
1 2
VIDEOAUDIO
L
R
REMOTECONTROL INAV IN 1
AUDIOVIDEO/MONO1
2
HDMI/DVI IN
Digital Connection. Supports HD video and Digital
audio. Doesn’t support 480i. 
Accepts  DVI  video  using  an  adapter  or  HDMI  to
DVI cable (not included)
OPTICAL DIGITAL AUDIO OUT
Optical digital  audio  output  for  use  with  amps  and
home theater systems. 
Note: In standby mode, this port doesn’t work.
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
AUDIO IN (RGB)
1/8” headphone jack for analog PC audio input.
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).
REMOTE CONTROL IN PORT
For a wired remote control.COMPONENT IN
Analog Connection. Supports HD. 
Uses  a  red,  green,  and  blue  cable  for  video  &  red
and white for audio.
AV (Audio/Video) IN
Analog  composite  connection.Supports  standard
definition video only (480i).
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
USB IN
Used for viewing photos and listening to MP3.
Power Cord Socket
For operation with AC power. 
Caution:  Never  attempt  to  operate  the  TV  on  DC
power.1
2
3
4
5
9
10
8
6
7
3
457
8
R
R
VARIABLE AUDIO OUT
(            )
10
6
42/50PJ350, 50PK350,  50/60PK550, 42/50PJ550,
60PK290, 
42/50PJ350C, 50/60PK550C 
DownloadedMFromMTV6Manual8comMManuals 
						

							PREPARATION
15
STAND INSTRUCTION
Image shown may differ from your TV.
Carefully  place  the  TV  screen  side  down  on  a
cushioned  surface  to  protect  the  screen  from
damage.
Assemble  the  parts  of  the  Stand  Body  with  the
Stand Base of the TV. 
1
2
Assemble the TV as shown.3
Installation (Except 60PK250, 60PK540, 60PK550, 60PK280, 60PK290, 60PK550C)
Fix  the  4  bolts  securely  using  the  holes  in  the
back of the TV.
4
Stand Body
Stand Base
M4x28 M5x14x 3
x 4
’ownloadedm&rommTV)ManualPcommManuals 
						

							PREPARATION
16
PREPARATION
Carefully  place  the  TV  screen  side  down  on  a
cushioned  surface  to  protect  the  screen  from
damage.1
Loose the bolts from TV.2
Detach the stand from TV.3
After  removing  the  stand,  install  the  included
p pr
ro
ot
te
ec
ct
ti
io
on
n 
 c
co
ov
ve
er
r
over the hole for the stand.
Press  the P PR
RO
OT
TE
EC
CT
TI
IO
ON
N 
 C
CO
OV
VE
ER
R
into  the  TV
until you hear it click.
Protection Cover  Detachment
PROTECTION COVER
(Fix a Guide to the Outsides.)
M4x28x 4M4x30x 5 (60PK250, 60PK540, 60PK550,
60PK280, 60PK290, 60PK550C) (42/50PJ250, 50PK250, 42/50PJ340,
42/50PJ350, 50PK350, 50PK340,
50PK540, 42/50PJ550, 50PK550
,
42/50PJ350C, 50PK550C)
KownloadedR9romRTV2JanualDcomRJanuals 
						

							PREPARATION
17
CABLE MANAGEMENT
After connecting the cables as necessary, install CABLE HOLDERas shown and bundle the cables.
To connect additional equipment, see EXTERNAL EQUIPMENT SETUP section.1
CABLE HOLDER
Image shown may differ from your TV.
KownloadedR9romRTV2JanualDcomRJanuals 
						

							PREPARATION
18
DESKTOP PEDESTAL INSTALLATION
PREPARATION
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
Image shown may differ from your TV.
4 inches 4 inches4 inches4 inches
G GEnsure adequate ventilation by following the clearance recommendations.
G
GDo not mount near or above any type of heat source.
CAUTION
SWIVEL STAND
(This feature is not available for all models.)
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your
viewing position.
KownloadedR9romRTV2JanualDcomRJanuals 
						

							PREPARATION
19
VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
G GDo not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
CAUTION
G GScrew  length  needed  depends  on  the  wall  mount
used.  For  further  information,  refer  to  the  instruc-
tions included with the mount.
G GStandard dimensions for wall mount kits are shown
in the table.
G GWhen  purchasing  our  wall  mount  kit,  a  detailed
installation  manual  and  all  parts  necessary  for
assembly are provided.
G GDo not use screws longer then the standard dimen-
sion,  as  they  may  cause  damage  to  the  inside  to
the TV.
G GFor wall mounts that do not comply with the VESA
standard  screw  specifications,  the  length  of  thescrews  may  differ  depending  on  their  specifica-
tions.
G GDo  not  use  screws  that  do  not  comply  with  the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal  injury.  LG  is  not  liable  for  these  kinds  of
accidents.
G GLG  is  not  liable  for  TV  damage  or  personal  injury
when  a  non-VESA  or  non  specified  wall  mount  is
used or the consumer fails to follow the TV installa-
tion instructions.
NOTE!
ModelVESA (A 
*B)
Standard Screw QuantityWall Mounting
bracket
(sold separately)
50PK550,
42/50PJ340
42/50PJ350,
42/50PJ250
50PK250,
50PK340,
50PK350,
50PK540,
42/50PJ550
,42/50PJ350C,
50PK550C
40 0
* 40 0 M 6 4PSW400B, 
PSW400BG
A A
B B
60PK550,
60PK250, 
60PK280,
60PK290,
50PK540,
60PK550C600
* 40 0 M 8 4
PSW600B, 
PSW600BG
’ownloadedm&rommTV)ManualPcommManuals 
						

							PREPARATION
20
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. 
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product. 
Caution: Please make sure that children don’t climb on or hang from the TV. 
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. 
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. 
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product. 
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
G GUse a platform or cabinet strong enough and large enough to support
the size and weight of the TV.
G GTo use the TV safely, make sure that the height of the bracket on the
wall and the one on the TV are the same.
NOTE!
,ownloadedm!rommTVvManualncommManuals