LG 42pw450 Owners Manual

							101
ENGENGLISH
SPECIFICATIONS
RGB-PC, HDMI-PC mode
HDMI-DTV mode
Component port connecting information
Component ports on theTV Y PBPR
Video output ports
on DVD player Y P
BPR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
Resolution
Horizontal 
Frequency (kHz) Vertical 
Frequency (Hz)
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768
(HDMI-PC 
mode : 
Except 
for LCD TV/LED  LCD TV)47.78 59.87
1360x768 47.7259.80
1280x1024 63.981 60.02
1920x1080 (RGB-PC) 66.587
59.93
1920x1080 (HDMI-PC) 67.5
60.00
Resolution Horizontal 
Frequency (kHz) Vertical 
Frequency (Hz)
720x480 31.469
31.5 59.94
60
720x576 31.25 50
1280x720 37.5
44.96 45 50
59.94 60
1920x1080 33.72
33.75
28.125 26.97 27
33.716 33.75
56.25
67.4367.5 59.94
60
50
23.97 24
29.976 30.00 50
59.94 60
Signal Component
480i/576i
O
480p/576pO
720p/1080iO
1080pO
(50 Hz / 60 Hz only)(Except for 42/50PT25**, 42/50PW35**, 
42/50PW45** , 22/26/32LK33**,  19/22/26/32LV25**, 
26/32LV30**)
yy RF module(BM-LDS201) specification(Only 
42/50PW35**, 42/50PW45**,  50/60PZ55**, 
32/42/47/55LW45**)
For TV By using a 2.4 GHz bandwidth radio 
frequency(RF).
 » 

 
Output : 1 dBm or lower
 » 

 
Maximum Communication Di
 stance : 10 m 
(30 ft) in an open space
 » 

 
Bandwidth : 2.4 GHz (2.4035 GHz - 
2.4783 GHz)
 »  T

ransfer Rate : 250 kbps
FCC ID of RF module inside TV
FCC ID : BEJLDS201
                                      
RF SPECIFICATIONS
  
						

							102
ENGENGLISH
SPECIFICATIONS
Video supported mode
                    File 
 
Extension name
Video DecoderAudio CodecMax Resolution
mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM
1920x1080@30p(only , Motion  JPEG 
640x480@30p)
dat
MPEG1 MP2
ts,trp,tp MPEG2, H.264, AVS, VC1 MP2,MP3,Dolby Digital,
AAC,
HE-AACvob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM
mp4, mov MPEG4,DivX 3.11, DivX 4.12, DivX 
5.x, DivX 6, Xvid 1.00, Xvid 1.01,  Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 AAC,
HE-AAC,MP3
mkv H.264, MPEG-1,2,4 MP2,MP3,Dolby Digital,AAC
HE-AAC,LPCM
divx, avi MPEG2, MPEG4,DivX 3.11, DivX 
4.DivX 5, DivX 6, Xvid 1.00, Xvid  1.01, Xvid 1.02, Xvid 1.03, Xvid  1.10-beta1/2H.264 MP2,MP3,Dolby Digital,LPCM,
ADPCM,AAC,HE-AAC
Motion JPEG
(avi, mp4, mkv) JPEG
LPCM, ADPCM
asf, wmv VC1 WMA
flv Sorenson H.263, H264 MP3, AAC
3D Supported format
Signal ResolutionHorizontal
Frequency (kHz)Vertical 
Frequency (Hz)Playable 3D video format
HDMI 
Input 720p 1280x720
44.96/45
59.94/60 Top & Bottom, Side by Side
89.9/90 59.94/60 HDMI 3D Frame Packing
37.5 50Top & Bottom, Side by Side
75 HDMI 3D Frame Packing
1080i 1920X1080 33.72/33.75 59.94/60
Top & Bottom, Side by Side
28.125 50
1080p 1920X1080 69.433/67.50 59.94/60
Top & Bottom, Side by Side, Checker 
Board,
Single Frame Sequential
56.250 50
27 24Top & Bottom, Side by Side, Checker 
Board
53.95/54 23.98/24 HDMI 3D Frame Packing
33.75 30Top & Bottom, Side by Side,
Checker Board
USB Input 1080p
1920X1080 33.75 30Top & Bottom, Side by Side,
Checker Board , MPO(Photo)
Resolution Playable 3D video format
Other Resolution Top & Bottom, Side by Side
PC Input 1920 X 1080 66.58759.93 Top & Bottom, Side by Side
Component 
Input
(For Plasma 
TV) 720p
1280x720 44.96
45.00
37.5059.94
60.00
50.00
Top & Bottom, Side by Side
1080i 1920x1080 33.72
33.75
28.125 59.94
60.00
50.00
Top & Bottom, Side by Side
Signal Playable 3D video format
DTV 720p, 1080i Top & Bottom, Side by Side
(Only 50/60PZ55**)
  
						

							103
ENGENGLISH
IR CODES
Code 
(Hexa) Function
Note
08
 (POWER)  Remote control Button (Power On/Off)
95 ENERGY SAVING Remote control Button
30 AV MODE Remote control Button
0B INPUT Remote control Button
F0 TV/RAD Remote control Button
10-19  Number Key 0-9 Remote control Button
53 LIST Remote control Button
1A Q.VIEW Remote control Button
02
  + Remote control Button
03
  - Remote control Button
1E FAV/MARK Remote control Button
DC 3D Remote control Button
09 MUTE Remote control Button
00 P
^Remote control Button
01 P
vRemote control Button
43      Home Remote control Button
AB
GUIDERemote control Button
45 Q.MENU Remote control Button
28 BACK Remote control Button
AA INFO Remote control Button
5B EXIT Remote control Button
44 OK Remote control Button
40
^Remote control Button
41
vRemote control Button
07
Remote control Button
72 RED Remote control Button
71 GREEN Remote control Button
63 YELLOW Remote control Button
61 BLUE(or 3D SETTING) Remote control Button
20 TEXT Remote control Button
21 T.OPT(T.Option) Remote control Button
39 SUBTITLE Remote control Button
B1 n
Remote control Button
B0 ► Remote control Button
BA yy
(FREEZE) Remote control Button
8E ►► Remote control Button
8F  ◄◄ Remote control Button
7E SIMPLINK Remote control Button
79 RATIO Remote control Button
91 AD  Remote control Button
IR CODES
yyThis feature is not available for all models.
  
						

							104
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an 
external control device (such as a computer or an 
A/V control system) to control the product’s func-
tions externally.
Connect the serial port of the control device to the 
RS-232C jack on the product back panel. 
Note: RS-232C connection cables are not supplied
with the product.
Type of connector;  
D-Sub 9-Pin Male
No.Pin name
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
3-Wire Configurations (
Not standard )
 

 
PC
  
TV
 

 
 RXD  2

 
3
  
TXD
 TXD

 
3
  
2
  
RXD
 GND

 
5
  
5
  
GND
 DTR

 
4
  
6
  
DTR
 DSR

 
6
  
4
  
DSR
 R

TS
 
7
  
7
  
R
 TS
 CTS

 
8
  
8
  
CTS
 

 
 

 
D-Sub 
 9  
D-Sub 
 9
RS-232C Configurations
7-Wire Configurations (
Standard RS-232C cable )
   PC
 TV
   
 RXD  2

 
3
  
TXD
 TXD

 
3
  
2
  
RXD
 GND

 
5
  
5
  
GND
 DTR

 
4
  
6
  
DSR
 DSR

 
6
  
4
  
DTR
 R

TS  
7
  
8
  
CTS
 CTS

 
8
  
7
  
R
 TS
  
 

 
D-Sub 
 9  
D-Sub 
 9
Set ID
Set ID number. "Real Data Mapping" on See p.110
1 Press  Home to access the main menus.
2 Press the Navigation buttons  to scroll to       
OPTION and press 

OK .
3 Press the Navigation buttons  to scroll to  SET  
ID

 and press  OK .
4 Scroll left or right to select a set ID number and 
select CLOSE . The adjustment range is 1-99.
5 When you are finished, p ress  EXIT .
1/DVI IN
OPTICAL 
DIGITALAUDIO OUT 
AUDIO IN(RGB/DVI)
RGB IN (PC)
ANT\fNNA  INCOMPON\fNT INAUDIOR L
Y
PBPR
VID\fOAV IN 1
VID\fO
1
2
MONO
1/DVI IN
OPTICALDIGITALAUDIO OUT
AUDIO IN(RGB/DVI)
RGB IN (PC)ANT\fNNA IN
COMPON\fNT IN
AUDIOR
L
Y
PBPR
VID\fOAV IN 1
VIDEO
12
MONO
RS-232C IN(CONTROL & SERVICE\f
5
69
1
  
						

							105
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
Command reference list Communication Parameters
yyBaud rate: 9600 bps (UART)
yy Data length: 8 bits
yy Parity : None yy
Stop bit: 1 bit
yy Communication code: ASCII code
yy Use a crossed (reverse) cable.
yy * Note : During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) 
are not executed and treated as NG.
COMMAND1 COMMAND2 DATA
(Hexadeci- mal) COMMAND1 COMMAND2 DATA
(Hexadeci- mal)
01. Power k a00 to 0114. Bass k s00 to 64
02. Aspect 
Ratio k
c(See p.107)15. Balance k t00 to 64
03. Screen 
Mute k
d(See p.107)16. Colour 
Temperature x
u00 to 64
04. Volume 
Mute k
e00 to 0117. ISM 
Method j
p(See p.109)
05. Volume 
Control k
f00 to 6418. Energy 
Saving j
q00 to 05
06. Contrast k g00 to 6419. Auto Con-
figuration j
u01
07. Brightness k h00 to 6420. Tune Com-
mand m
a(See p.109)
08. Colour k i00 to 6421. Programme 
Add/Skip m
b00 to 01
09. Tint k j00 to 6422. Key m cKey Code
10. Sharpness k k00 to 6423. Control 
Back Light m
g00 to 64
11. OSD Select k l00 to 0124. Input select 
(Main) x
b(See p.110)
12. Remote 
Control
Lock Mode k
m00 to 0125. 3D x
t(See p.110)
13. Treble k r00 to 6426. Extended 
3D x
v(See p.110)
(Depending on model)
  
						

							106
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]
 
 
 : 
 First 
 command to control the TV.(j, k, m or x)
[Command 2]
 
 
 : 
 Second 
 command to control the TV.
[Set ID]
 
 
 : 
 
  
Y
 ou can adjust the set ID to choose desired monitor ID number in option menu. 
Adjustment range is 1 to 99.  W hen selecting Set ID ‘0’, every connected set is controlled.
      Set  ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0x0 to 0x63) on 
transmission/receiving protocol.
[DATA] 
  

: 
 T
 o transmit command data. 
 T
 ransmit ‘FF’ data to read status of command.
[Cr] 
  

: 
 Carriage 
 Return
 

   
ASCII 

code ‘0x0D’
[   ] 
  

: 
 ASCII 
 code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this  time, if the data is data read mode, it indicates present status data. If the data is data write mode, it 
returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from 
 non-viable 

functions or communication errors.
Data
 
00: 
 Illegal Code
  
						

							107
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
08. Colour (Command: k i)
 ► To adjust the screen colour. You can also adjust colour in the PICTURE menu.
Data 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][i][  ][Set ID][  ][Data][Cr]
Ack [i][  ][Set ID][  ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
 ► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
Data
 
00 
 :  Volume mute on (Volume off)
 01  : 

 Volume mute off (Volume on)  
Transmission [k][e][  ][Set ID][  ][Data][Cr]
Ack [e][  ][Set ID][  ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture 
Size)
 ► To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect  Ratio in the Q.MENU. or PICTURE menu.
Data
 0

1 
 :
   Normal screen 
 
 

 
 
   (4:3) 
 0

2 
 :
   Wide screen (16:9) 
 0

4  :  Zoom
 0

6  :  Original 07  :  14:9
09  :  Just Scan
0B  :  Full
 W

ide
10 to 1F :
 C

inema Zoom 1 to 16
Transmission [k][c][  ][Set ID][  ][Data][Cr]
* Using the PC input, you select either 16:9 or 4:3  screen aspect ratio.
*  In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 
Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), 
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, 
Just Scan is available.
*  Full Wide is supported only f
or DTV.
Ack [c][  ][Set ID][  ][OK/NG][Data][x]
03. Screen Mute (Command: k d)
 ► To select screen mute on/off.
Data 00 :
 Screen  mute off (Picture on) 
   V ideo mute off
 01 

:  
Screen 
 mute on (Picture off)
 10 

:  
V
 ideo mute on
* In case of video mute on only, TV will display On  Screen Display(OSD). But, in case of Screen mute 
on, TV will not display OSD.
Transmission [k][d][  ][Set ID][  ][Data][Cr]
Ack [d][  ][Set ID][  ][OK/NG][Data][x]
05. Volume Control (Command: k f)
 ► To adjust volume. You can also adjust volume with the VOLUME  but-
tons on remote control.
Data
 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][f][  ][Set ID][  ][Data][Cr]
Ack [f][  ][Set ID][  ][OK/NG][Data][x]
06. Contrast (Command: k g)
 ► To adjust screen contrast.  You can also adjust contrast in the PICTURE menu.
Data  
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][g][  ][Set ID][  ][Data][Cr]
Ack [g][  ][Set ID][  ][OK/NG][Data][x]
07. Brightness (Command: k h)
 ► To adjust screen brightness. You can also adjust brightness in the PICTURE menu.
Data 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][h][  ][Set ID][  ][Data][Cr]
Ack [h][  ][Set ID][  ][OK/NG][Data][x]
01. Power (Command: k a)
 ► To control Power On/Off of the set.
Data 00 : Power Off 01 : Power On
Transmission[k][a][  ][Set ID][  ][Data][Cr]
Ack [a][  ][Set ID][  ][OK/NG][Data][x]
 ► To show Power On/Off.
Transmission [k][a][  ][Set ID][  ][FF][Cr]
* Similarly, if other functions transmit ‘0xFF’ data based  on this format, Acknowledgement data feed back 
presents status about each function.
* OK Ack., Error Ack. and other message may display  on the screen when TV is power On.
Ack [a][  ][Set ID][  ][OK/NG][Data][x]
  
						

							108
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
12. Remote control lock mode (Command: k m)
 ► To lock the front panel controls on the monitor and remote  control.
Transmission [k][m][  ][Set ID][  ][Data][Cr]
Data
 
00 
 : Lock off 01 : Lock on
* If you are not using the remote control, use this mode.
 When 

main power is on/off, external control lock is 
released.
* In the standby mode, if key lock is on, TV will not turn  on by power on key of IR & Local Key.
Ack [m][  ][Set ID][  ][OK/NG][Data][x]
11. OSD Select (Command: k l)
 ► To select OSD (On Screen Display) on/off when controlling 
remotely.
Transmission [k][l][  ][Set ID][  ][Data][Cr]
 Data  
00 
 : OSD off 01 : OSD on
Ack [l][  ][Set ID][  ][OK/NG][Data][x]
09. Tint (Command: k j)
 ► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
Data
 
Red 
 : 00 to Green : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][j][  ][Set ID][  ][Data][Cr]
Ack [j][  ][Set ID][  ][OK/NG][Data][x]
 ► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
10. Sharpness (Command: k k)
Data  
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][k][  ][Set ID][  ][Data][Cr]
Ack [k][  ][Set ID][  ][OK/NG][Data][x]
15. Balance (Command: k t)
 ► To adjust balance. You can also adjust balance in the AUDIO menu.
Data 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][t][  ][Set ID][  ][Data][Cr]
Ack [t][  ][Set ID][  ][OK/NG][Data][x]
14. 
Bass (Command: k s)
 ► T

o adjust bass.
   You can also adjust bass in the AUDIO menu.
Data
 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][s][  ][Set ID][  ][Data][Cr]
Ack [s][  ][Set ID][  ][OK/NG][Data][x]
13. Treble (Command: k r)
 ► T
o adjust treble. 
 You can also adjust treble in the AUDIO menu.
Data
 
Min 
 : 00 to Max : 64
 * Refer 

to ‘Real data mapping’. See p.110.
Transmission [k][r][  ][Set ID][  ][Data][Cr]
Ack [r][  ][Set ID][  ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
 ► To adjust colour temperature. You can also adjust Colour  Temperature in the PICTURE menu.
Data Min : 00 to Max : 64 *  Refer 

to ‘Real data mapping’. See p.110.
Transmission [x][u][  ][Set ID][  ][Data][Cr]
Ack [u][  ][Set ID][  ][OK/NG][Data][x]
  
						

							109
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
20. Tune Command (Command: m a)
 ► Select channel to following physical number.
Data00 : High  channel data
Data01 :  Low  channel data
 ex.

 
No. 
 47 -> 00 2F (2FH)
 

 
No. 
 394 -> 01 8A (18AH), 
 

 
DTV 
 No. 0 -> Don’t care
Data02 :
 
0x00 
 : 
Analogue Main 
   0x10 
: DTV Main
 

   
0x20 

: Radio
Channel data range
 Analogue - Min: 00 to Max: 63 (0 to 99)
 Digital - Min: 00 to Max: 3E7 (0 to 999)
Transmission [m][a][  ][Set ID][  ][Data0][  ][Data1][  ][Data2][Cr]
Ack [a][  ][Set ID][  ][OK/NG][Data][x]
Data
 
Min: 
 00 to Max: 7DH
19. Auto Configure(Command: j u)
 ► To adjust picture position and minimize image shaking  automatically. It works only in RGB (PC) mode.
Data 01: To set
Transmission [j][u][  ][Set ID][  ][Data][Cr]
Ack [u][  ][Set ID][  ][OK/NG][Data][x]
17. ISM Method (Command: j p) (Only Plasma TV) 
 ► To control the ISM method. You can also adjust ISM 
Method in OPTION menu.
Data 02: Orbiter 04:  White wash
 08: 

Normal
 20: 

Colour Wash
Transmission [j][p][  ][Set ID][  ][Data][Cr]
Ack [p][  ][Set ID][  ][OK/NG][Data][x]
18. Energy Saving (Command: j q)
 ► To reduce the power consumption of the TV. You can also  adjust Energy Saving in PICTURE menu.
Transmission [j][q][  ][Set ID][  ][Data][Cr]
Ack [q][  ][Set ID][  ][OK/NG][Data][x]
Power Saving  FunctionLevel Description
7 6 5 4 3 2 1 0
0 0 0 0 Low
 Power 0 0 0 0 Off
0 0 0 0 Low
 Power 0 0 0 1 Minimum
0 0 0 0 Low
 Power 0 0 1 0 Medium
0 0 0 0 Low
 Power 0 0 1 1 Maximum
0 0 0 0 Low
 Power 0 1 0 1 Screen Off
0 0 0 0 Low
 Power 0 1 0 0 Intelligent 
Sensor
(Plasma TV  only)
0 0 0 0 Low
 Power 0 1 0 0 Auto
(LCD TV/
LED LCD  TV only)
(Depending on model)
22. Key(Command: m c)
 ► To send IR remote key code.
Data Key code - See p.103.
Transmission [m][c][  ][Set ID][  ][Data][Cr]
Ack [c][  ][Set ID][  ][OK/NG][Data][x]
21. Programme Add/Skip(Command: m b)
 ► To set skip status for the current Programme.
 Data 00 : Skip            01 : Add
Transmission [m][b][  ][Set ID][  ][Data][Cr]
Ack [b][  ][Set ID][  ][OK/NG][Data][x]
23. Control Back Light(Command: m g) (Only LCD 
TV/LED LCD TV))
 ► To control the back light.
Data Min : 00 to Max : 64
Transmission [m][g][  ][Set ID][  ][Data][Cr]
Ack [g][  ][Set ID][  ][OK/NG][Data][x]
  
						

							110
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
*  Real data mapping 
00 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
 
6E : Step 110
73 : Step 115
74 : Step 116
CF : Step 199
FE : Step 254 FF : Step 255
24. Input select (Command: x b)
 (Main Picture Input)
 ► To select input source for main picture.
Data Structure
MSB  
LSB
Transmission [x][b][  ][Set ID][  ][Data][Cr]
External InputInput Number
0 0 0 0 0 0 0 0
Ack [b][  ][Set ID][  ][OK/NG][Data][x]
External Input Data
0 0 0 0 DTV
0 0 0 1 Analogue
0 0 1 0 AV
0 1 0 0 Component
0 1 1 0 RGB
0 1 1 1
HDMI
1 0 0 0
1 0 0 1
1 0 1 0
Input Number Data
0 0 0 0 Input1
0 0 0 1 Input2
0 0 1 0 Input3
0 0 1 1 Input4
25. 3D(Command: x t) (only 3D models)       
(Depending on model)  
 ► To change 3D mode for TV.
Data Structure
Data01  00  : 3D On
 

 
01 
 : 3D Off
 

 
02 
 : 3D to 2D
 

 
03 
 : 2D to 3D
Data02 
 00 

: Top and Bottom
 

 
01 
 : Side by Side
 

 
02 
 : Check Board
 

 
03 
 : Frame Sequential
Data03 
 00 

: Right to Left
 

 
01 
 : Left to Right
Data04 
 3D 

Effect(3D Depth): Min : 00 ~ Max : 14 
      
 

 
 
  (*transmit by Hexadecimal code)
*If data1 is 00(3D On), data4 has no meaning.
*If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and 
data4 have no meaning.
*If data1 is 03(2D to 3D), data2 and data3 have no 
meaning.
Data 1 Data 2 Data 3 Data 4
00 OO X
01 XXX
02 XXX
03 XXO
X : don’t care
Transmission [x][t][  ][Set ID][  ][Data01][  ][Data02]
[  ][Data03][  ][Data04][Cr]
Ack [t][  ][OK][Data01][Data02][Data03][Data04][x]
[t][  ][NG][Data01][x]
26 . Extended 3D(Command: x v) (only 3D models) 
 

       (Depending on model)
 ► To change 3D option for TV.
Data01 : 3D option 
 00  : 3D Picture Correction
 

 
01 
 : 3D Depth (2D to 3D only)
 

 
02 
 : 3D Viewpoint  
 

 
03 
 : 3D Picture Size  (Plasma TV only)
 

 
04 
 : 3D Picture Balance  (Plasma TV only)
 

 
0
 5 : 3D Optimization  (Active type (LCD TV) only)
Data02
 
 
 It has own range for each 3D option deter-
mined by Data01.
1) When Data01 is 00
 

 
00 
 : Right to Left
 

 
01 
 : Left to Right
2) When Data01 is 01, 02
Data 
 

 
Min: 
 0 ~ Max: 14
(*transmit by Hexadecimal code)Data value range(0~20) converts Viewpoint range(-
10~10) automatically(Depending on model)
3) When Data01 is 03
 
 
00 
 : Just Scan
 

 
01 
 : 16:9
4) When Data01 is 04
 

 
00 
 : Off
 

 
01 
 : On
5) When Data01 is 05
Data 
 

 
Min: 
 0 ~ Max: 02
(*transmit by Hexadecimal code)   * Refer to ‘Real data mapping’.
Transmission [x][v][  ][Set ID][  ][Data01][  ] 
[Data02][Cr]
Ack [v][  ][OK][Data01][Data02][x][v][  ][NG]
[Data01][x]